Wagler Competition Parts & Accessories

Wagler Competition Duramax Mechanical Belt TensionerDoes away with the weak factory spring belt tensionerThese are a MUST when running dual CP3 pumps on your serpentine belt setupPart Number: WCPC661025..

4 Week Lead Time before part is able to ship!The Wagler WCPC6669 Pinned Oil Pump is an excellent upgrade for the oiling system when rebuilding the engine in your 2001-2010 GM 6.6L Duramax. Wagler starts with a brand-new GM oil pump and pins the gear to the shaft to prevent the gear from spinning of..

The Wagler WCPC6658 Street Girdle adds strength to your 2001-2010 GM 6.6L Duramax engine. The WCP Street Girdle features a 1/2" thick, one-piece design. It increases strength in the bottom end of your Duramax block by tying the main caps to the oil pan bolts. Each kit includes ARP Main Studs, ARP Cr..

Strengthen the bottom end in your 2001-2016 GM 6.6L Duramax with the Wagler WCPC6641 Billet Main Caps. Designed, and machined in-house at Wagler Competition Products, these Billet Main Caps increase strength and rigidity and work with or without the WCP Girdle. WCP Billet Main Caps are designed..

Upgrade the valvetrain in your 2001-2016 GM 6.6L Duramax engine with the Wagler WCPC6643 Dual Valve Spring Kit With Steel Retainers. Designed to work with your factory spring shim, the dual valve spring kit increases seat pressure to 145lbs at 1.650 installed height.   130lb seat pres..

Upgrade the valvetrain in your 2001-2016 GM 6.6L Duramax with the Wagler WCPC6664 Pushrods. Built from 3/8" x .135 wall 4130 Chromoly, these push rods increase strength and are able to handle the stress associated with higher engine RPM and higher valve spring pressures commonly found in performance..

The Wagler WCPC6686-1 Alternate Fire Street Stage 1 Camshaft provides your 2001-2016 GM 6.6L Duramax with increased driveability and increased performance. This cam is a great replacement for towing, street use, and mild race applications. This Stage 1 camshaft does not require any piston valve reli..

The Wagler WCPC6686-1 Street Stage 1 Camshaft provides your 2001-2016 GM 6.6L Duramax with increased driveability and increased performance. This cam is a great replacement for towing, street use, and mild race applications. This Stage 1 camshaft does not require any piston valve reliefs for install..

The Wagler Duramax Entry Level Rotating Assembly is the ideal package for a stock workhorse or a hot street truck making up to 1,000 HP. Even if the power goals are much less, this assembly can offer piece of mind for those who abuse their engines while earning a living.Parts Included:Callies forged..

The affordable Wagler Duramax Street Fighter connecting rods are the perfect solution for a hot street truck making 1,000 HP or less. The as-forged manufacturing process allows for the strength of forging, yet keeps the cost down by removing some of the extra processes that are put into the Competit..

The Wagler STREETFIGHTER Duramax offers neck-snapping torque, with impeccable street manners, and is the ideal upgrade for light-duty GM trucks and classic hot rods alike. It was put through seventy-eight grueling engine dyno passes and intentionally pushed to the breaking point, just to find out wh..

Beginning from billet 6061 aluminum material it is custom CNC machinedThis systems features billet coolant tank, Water to air core size 18L X 10.1W, Tig welded, O-ring surfaces, Inlet to your specifications (V-band, Vanjen or hose barb)This system is Port Matched to the WCP Cylinder HeadsThis billet..

Improve the valvetrain in your 2001-2016 GM 6.6L Duramax when you install the Wagler WCPC6618 Billet Rocker Arm Bridge Set. These rocker arm bridges feature forged 4340ACQ certified billet steel construction to handle the increase horsepower of your modified Duramax. With all drafting, design, progr..

The Wagler CRF6.0 Connecting Rod Set is a must have for any enthusiast, racer, or shop that's building a 2003-2007 Ford 6.0L Powerstroke engine. Maximize reliability and push your engine even harder with the Wagler Connecting Rod Set. Proudly made in the USA, Wagler Competition Products 6.0L Connect..

Wagler Cummins Dual CP3 Cover for Common Rail Cummins Engines.Drives both injection pumps off the rear.The ECM must be relocated.Part Number: WCPD6710 ..

WCP Billet Valve Covers are designed and machined in houseIncludes mounting bolts and O-Ring sealFits LLY, LBZ and LMMMade in the USAOption of polished and anodized (Additional Charge)Part Number: WCPC6682..

Wagler Competition Duramax Mechanical Belt TensionerDoes away with the weak factory spring belt tensionerThese are a MUST when running dual CP3 pumps on your serpentine belt setupPart Number: WCPC661025.1..

Maximize strength and reliability in your 2008-2010 Ford 6.4L Powerstroke engine build with the Wagler CRF6.4 Connecting Rod Set. Proudly made in the USA, Wagler Competition Products 6.4L Connecting Rods are forged by Trenton Forging in Trenton, Michigan with the forging made from 4340ACQ certified ..

Bulletproof your engine build on your 2011-2016 Ford 6.7L Powerstroke with the Wagler CRF6.7 Connecting Rod Set. Proudly made in the USA, Wagler Competition Products 6.7L Connecting Rods are forged by Trenton Forging in Trenton, Michigan with the forging made from 4340ACQ certified material. The upd..

New GM oil pumpPinned to keep the gear from spinning on the shaftShimmed for more oil pressureFits LML DuramaxComes with gear and nutPart number: WCPC66116..

Wagler Competition Duramax Mechanical Belt TensionerDoes away with the weak factory spring belt tensionerThese are a MUST when running dual CP3 pumps on your serpentine belt setupPart Number: WCPC661025.2..

Add strength to the bottom end of your high performance 2011-2019 Ford 6.7L Powerstroke with a set of Wagler WCPF6703 Billet Main Caps. Designed and machined in-house, Wagler Competition Products (WCP) Billet Main Caps are incredibly durable and won't distort when torquing down the main studs.WCP Bi..

The Wagler CRF6.7.1 Connecting Rod Set will support 1750+ Horsepower to make the bottom end in your 2016.5-2019 Ford 6.7L Powerstroke bulletproof. Wagler Competition Products does all engineering, drafting, programming, machining, assembly, and QA in-house to ensure that all connecting rods are hone..

2019+ Cummins Lifter Modification KitIncludes Lifter Spacers, Pushrods, & OE Adjustable Rockers(Utilizes factory lifter body by adding solid spacer into hydraulic portion)Wagler: WCPD6720 ..

WCP proudly presents their updated heavy duty Cummins connecting rods. These competitively priced connecting rods feature the benefits below –• 100% Made in the USA• Forged by Trenton Forging in Trenton, MI 48183• Forging made from 4340ACQ certified material• All drafting, design, programming, machi..

WCP proudly presents their updated heavy duty Cummins connecting rods. These competitively priced connecting rods feature the benefits below –• 100% Made in the USA• Forged by Trenton Forging in Trenton, MI 48183• Forging made from 4340ACQ certified material• All drafting, design, programming, machi..

WCP proudly presents their updated heavy duty Cummins connecting rods. These competitively priced connecting rods feature the benefits below –• 100% Made in the USA• Forged by Trenton Forging in Trenton, MI 48183• Forging made from 4340ACQ certified material• All drafting, design, programming, machi..

The affordable Wagler Street Fighter Series Cummins 5.9/6.7L connecting rods are the perfect solution for a hot street truck making 1,500 HP or less. The as-forged manufacturing process allows for the strength of forging, yet keeps the cost down by reducing the amount of machining compared to the Co..

WCP Billet Main Caps are designed and machined in houseDoes not distort when torquing down main studsAdds strength to the bottom endCan be used with or without the WCP GirdleFor extra strength add the WCP Street GirdleMade in the USAMust be line boredPart Number: WCPD2403 ..