Mishimoto has developed an oil catch can to make sure you’re getting the most out of your performance parts.Over time harmful oil will build up inside..
This 70amp relay activates the fuel solenoid on years 94-98.5 12valve. If this relay is bad your engine will crank fine but will not start because the..
This replacement fusible link is the protection for the power supply to your fuel shutoff solenoid. It's a 65 amp inline fuse that is connected to th..
These 304 Stainless Steel T-Bolt Clamps are perfect for high pressure/high heat intake or exhaust pipe coupling.
These clamps are smooth on the insid..
This Vibrant 22908 90 Degree Push-On Hose Fitting is designed to work with the Vibrant Push-On Hose. This Push on Hose Fitting comes with an aluminum ..
Fits: Universal- For 4" O.D. TubingThis Vibrant 1168 4" Stainless Steel Seal Clamp provides superior clamping and sealing of overlap joints without pe..
Fits: Universal- 1/8" NPT (Weld-on)This Vibrant 1197 Exhaust Gas Temperature Sensor Bung comes with an alternative to drilling and tapping your manifo..
Fits: Universal-2" ID X 4" LongThis Vibrant 60604 2" TurboFlex Coupling WIth Interlock Liner is built to make your exhaust components last. By isolati..
The Vibrant 16836 -10AN Flare to -10 AN With O-Ring Straight Adapter Fitting is a exceptional quality, black anodized aluminum fitting that will you a..
The Vibrant 11998 -8AN 50' Roll of Black Nylon Braided Flex Hose is a lightweight hose that is great for oil, water, fuel or coolant. This hose featur..
Vibrant Performance Banjo Fitting and Bolt sets are manufactured from 6061 Aluminum Alloy and are perfectly suited for connecting AN Fuel Lines to you..
Adapt your -8AN male fitting to a 1/2" tube with a high quality black anodized aluminum Vibrant -8AN Male to 1/2" Tube Adapter Fitting with Brass Oliv..
The Vibrant 16318 -8AN Push-On Flex House allows to plumb your custom fuel system. The black nitrile rubber hose has an operating pressure of 250PSI a..
The Vibrant 16328 -8AN Push-On Flex House allows to plumb your custom fuel system. The black nitrile rubber hose has an operating pressure of 250PSI a..
The Vibrant 10219 -8 AN x 1/4" NPT Straight Adapter Fitting is a superior quality, black anodized aluminum fitting that will you adapt a threaded -8 A..
4-3/8” to 3-1/2” Reducer:This 2-3/4” long coupling is designed to connect to tubes with a 4-3/8” and 3-1/2” diameter. It’s commonly used on aFe POWER ..
4-5/32” to 3-3/4” Reducer:This 2-11/32” long coupling is designed to connect to tubes with a 4-5/32” and 3-3/4” diameter. It’s commonly used on aFe PO..
This Vibrant 22908 90 Degree Push-On Hose Fitting is designed to work with the Vibrant Push-On Hose. This Push on Hose Fitting comes with an aluminum ..
3-1/2” Internal Diameter:This 3” long coupling is designed to connect to a tube with a 3-1/2” diameter. It’s commonly used on aFe POWER cold air intak..
4” Internal Diameter:This 3” long coupling is designed to connect to a tube with a 4” diameter. It’s commonly used on aFe POWER cold air intake system..
4” Internal Diameter:This 4” long coupling is designed to connect to a tube with a 4” diameter. It’s commonly used on aFe POWER cold air intake system..
4-1/4” Internal Diameter:This 3” long coupling is designed to connect to a tube with a 4-1/4” diameter. It’s commonly used on aFe POWER cold air intak..
4-1/8” Internal Diameter:This 3” long coupling is designed to connect to a tube with a 4-1/8” diameter. It’s commonly used on aFe POWER cold air intak..
The AFE 59-00004 4-3/4" Magnum Force Hump Coupling is the perfect replacement for any worn, torn, or damaged couplers in your intake system. The polyu..
Our Fleece Performance high quality stainless steel fitting is designed and manufactured in-house to allow return fuel to freely flow from your CP3.&n..
*Special 6.00" length sized* 2.75" ID to 3.00" ID x 6.00" long, high temperature, 5 ply reducer boot. Strength tested to handle diesel boostStainless ..