Brand: T/Rex Technology
Part Number: REXFRZPLUG
DISCONTINUEDFeatures:Replaces Side & Front Freeze Plugs
Nice Finish
Includes Hardware ..
$0.00
Brand: T/Rex Technology
Part Number: 9402SBB4X4
BACKORDERED NO ETAFits 4x4 application only.
The T-rex Technologies Steering Box Brace is designed to take all of the movement out of the stock steering box. The steering box is only attached at the top which allows the bottom to swing back and forth while under demand. By attaching the bottom of ..
$0.00
Brand: T/Rex Technology
Part Number: EXTARMS
BACKORDERED NO ETA **Updated 10/10/2022**T/REX Upper and Lower control arms for 2nd - 4th gen Cummins. They are designed for leveled applications and are about 1/2" longer to re-center the axle after leveling it. They are built with spherical joints at one end and sleeved urethane bushings at ..
$0.00
Brand: T/Rex Technology
Part Number: 0308SBB4X4
BACKORDERED NO ETAThe T-rex Technologies Steering Box Brace is designed to take all of the movement out of the stock steering box. The steering box is only attached at the top which allows the bottom to swing back and forth while under demand. By attaching the bottom of the box to the frame with th..
$0.00
Brand: T/Rex Technology
Part Number: 9402Trexretrokit
BACKORDERED NO ETAT/REX adjustable track bar for 2nd gen dodges with relocation bracket and a cam adjustment and johnny joints at both ends. Accomodates for lifts up to 4in as well and works well with our T/Rex steering box braxes as well. These kits are built on a demand basis so please allow 1 to..
$0.00
Brand: T/Rex Technology
Part Number: LBZLMMPCVKIT
BACKORDERED NO ETA04.5-2010 PCV reroute kits with the 2" resonator billet plugKit includes:1 - 5/8" barbed T-fitting1 - 5/8" hose x 72" long2 - SS band style hose clamps2 - Billet flange plugs & o-rings1 - Billet 1" PCV plug & o-ring dual grooved for stock or AFE intake horn1 - Billet 2" re..
$0.00
Brand: T/Rex Technology
Part Number: LMLPCVKIT
BACKORDERED NO ETA
The PCV reroute kits GM changed somewhere in 2012 mounting hole size for whatever reason. This plate mounts on the back of the air intake horn similar to the old Duramax kits. Please chose year above.
TRex Tech part number: LMLPCVKIT..
$0.00
Brand: T/Rex Technology
Part Number: TRP-CRFFDEL
BACKORDERED NO ETA03+ Cummins Fuel Filter Delete Billet Aluminum
Uses Factory Banjo Bolts To ReinstallT/Rex Tech part number: TRP-CRFFDEL..
$0.00
Brand: T/Rex Technology
Part Number: 62TRAC
BACKORDERED NO ETAT/REX Traction Bars will come in a standard length of 62 inches . Kit comes with all necessary hardware to bolt on your truck, some drilling will be required, but zero fabrication is necessary. Traction bars will come in black as the standard color but we will be able to get them ..
$0.00
Brand: T/Rex Technology
Part Number: TRPLB7INTK
BACKORDERED NO ETA 01-04 Duramax Intake Knuckle, Direct Bolt On Fit To Turbo, 30% Increase Air Flow Over Stock Knuckle, No Modification Required To Factory Air Intlet Tube
T/Rex Tech part number: TRPLB7INTK..
$0.00
Brand: T/Rex Technology
Part Number: TREX ARMS/TRAC
BACKORDERED NO ETAT/REX Traction Bars will come in a standard length of 62 inches . Kit comes with all necessary hardware to bolt on your truck, some drilling will be required, but zero fabrication is necessary. And we also offer a u bolt kit with top plate for lifted applications. Traction bars wi..
$0.00
Brand: T/Rex Technology
Part Number: 2INLEV
BACKORDERED NO ETAT-Rex Technologies 2 inch leveling kits will fit 2nd-4th gen Dodge pickups, this kit does not need longer shocks so you can run stock shocks and they bolt on in under 2 hours. The Leveling kits will come in black as the standard color but we will be able to get them powder coated ..
$0.00
Brand: T/Rex Technology
Part Number: TRPSUMP
BACKORDERED NO ETAAll Pre Assembled Like In Pics2pc Washer Design
Stainless Steel Bolt & Nylon Washer Seal [email protected] Allen Stud Washer Alignment Studs
[email protected] #8 JIC Fittings No tank drop!!
T/Rex Technology part #: TRPSUMP..
$0.00
Brand: T/Rex Technology
Part Number: GM64.5TRAC
BACKORDERED NO ETAT/REX Traction Bars will come in a standard length of 64.5 inches . Kit comes with all necessary hardware to bolt on your truck, some drilling will be required, but zero fabrication is necessary.
30 degree johnny joints on axle end to give the suspension flex it needs with the l..
$0.00
Brand: T/Rex Technology
Part Number: REXBILLETTWINTAKE
BACKORDERED NO ETA89-98 Cummins Billet Twin Intake Plate
Features:Includes Mounting Kit w/ Gasket Kit
Pre-Tapped w/Plugs..
$0.00
Brand: T/Rex Technology
Part Number: REXBILLETBADGES
BACKORDERED NO ETAThese emblems can upgrade the look by replacing your current set of badges.
Features:Polished
Billet
Blemish-Free
Set of Two..
$0.00
Brand: T/Rex Technology
Part Number: LLY-LBZ-LMMDSCP
BACKORDERED NO ETAKit Includes:Drivers side charge pipe
4 ply boot kit
Stainless steel clamps TRex Tech part number: LLY-LBZ-LMMDSCP..
$0.00
Brand: T/Rex Technology
Part Number: LMLDSCHRGPIPEKIT
BACKORDERED NO ETAKit Includes:2 Piece charge pipe
4 ply boot kit
Stainless steel clamps
TRex Tech part number: LMLDSCHRGPIPEKIT...
$0.00
Brand: T/Rex Technology
Part Number: TRPGMTIEROD
BACKORDERED NO ETANO MORE BROKEN TIE RODS!
Everyone knows the tie rods are a weak link on their Duramax. Fix it before it becomes an issue!
T/Rex Tech part number: TRPGMTIEROD..
$0.00
Brand: T/Rex Technology
Part Number: REXLGHTBAR
BACKORDERED NO ETAFeatures:Engraved
Bright LEDs
Polished..
$0.00
Brand: T/Rex Technology
Part Number: LLYKIT
BACKORDERED NO ETAKit Includes:Drivers & Passengers side charge pipe4 ply boot kitStainless steel clamps TRex Tech part number: LLYKIT..
$0.00
Brand: T/Rex Technology
Part Number: LLY-LBZ-LMMPSCP
BACKORDERED NO ETAThis pipe is designed to reuse your factory boots and clamps.
Please enter your VIN above so we verify fitment.
Image may not be exact part. For reference only.
TRex Tech part number: LLY-LBZ-LMMPSCP..
$0.00
Brand: T/Rex Technology
Part Number: TWNINTAKETUBE
BACKORDERED NO ETA94-98.5 Dodge Ram twin ram 3" mandrel formed tube
An additional 10-15 days will be added to the shipping timeframe when a Red finish is selected.
You HAVE to delete your grid heater when using this kit. It bolts directly to the intake plate without the spacer.1/2" aluminum p..
$0.00
Showing 1 to 23 of 23 (1 Pages)