Menu
Your Cart

03-07 Dodge 5.9L Cummins Pusher 3.5 In MEGA Intake System w/Cross-Air

03-07 Dodge 5.9L Cummins Pusher 3.5 In MEGA Intake System w/Cross-Air
03-07 Dodge 5.9L Cummins Pusher 3.5 In MEGA Intake System w/Cross-Air
03-07 Dodge 5.9L Cummins Pusher 3.5 In MEGA Intake System w/Cross-Air
03-07 Dodge 5.9L Cummins Pusher 3.5 In MEGA Intake System w/Cross-Air
03-07 Dodge 5.9L Cummins Pusher 3.5 In MEGA Intake System w/Cross-Air
03-07 Dodge 5.9L Cummins Pusher 3.5 In MEGA Intake System w/Cross-Air
03-07 Dodge 5.9L Cummins Pusher 3.5 In MEGA Intake System w/Cross-Air
03-07 Dodge 5.9L Cummins Pusher 3.5 In MEGA Intake System w/Cross-Air
03-07 Dodge 5.9L Cummins Pusher 3.5 In MEGA Intake System w/Cross-Air
03-07 Dodge 5.9L Cummins Pusher 3.5 In MEGA Intake System w/Cross-Air
03-07 Dodge 5.9L Cummins Pusher 3.5 In MEGA Intake System w/Cross-Air
03-07 Dodge 5.9L Cummins Pusher 3.5 In MEGA Intake System w/Cross-Air
03-07 Dodge 5.9L Cummins Pusher 3.5 In MEGA Intake System w/Cross-Air
03-07 Dodge 5.9L Cummins Pusher 3.5 In MEGA Intake System w/Cross-Air
03-07 Dodge 5.9L Cummins Pusher 3.5 In MEGA Intake System w/Cross-Air
  • Part Number: PDC0307MCA
$749.00

Available Options

The Pusher 3.5" Mega Intake System with Cross-Air replaces all of your 3” factory post intercooler plumbing and intake manifold with 3.5” mandrel bent tubing, heavy duty 4-ply silicone couplers and stainless T-bolt clamps. This system provides the most airflow possible to the factory Cummins head, resulting in a significant drop in EGT's through better equalized airflow to all cylinders. The Pusher Mega Intake System with Cross-Air increases fuel mileage, throttle response and turbo spool.

The Cross-Air taps into an existing port at the front and rear of the cylinder head that are normally sealed off with a freeze plug style fittings from the factory. By splitting off the driver-side charge tube and creating two additional parallel paths to those ports, cylinders 1, 5, and 6 receive significantly better air supply, greatly helping balance the engine temperatures and load at each cylinder.

This entire package is fully TIG-welded, utilizing mandrel bent tubing, a laser cut 1/2" flange, and 1/4" dipstick mount. The intake manifold is standard equipped with four 1/8 inch NPT ports on the back for methanol/water injection, a boost gauge, etc.

This is a complete kit that includes instructions, machined cylinder head adapters, heavy duty 4-ply silicone couplers, stainless T-bolt clamps, an OEM gasket and hardware, plus 1/8 inch port plugs for a quality install.

This kit must be powder coated or painted prior to install. For an additional charge, select powder coating colors are available.

APPS Compatibility: This kit is not compatible with the APPS mounted in the stock location on 2003-2005 trucks. You must relocate or purchase the Pusher APPS relocation bracket to use the Cross-Air on trucks equipped with a APPS.

Intercooler Compatibility: This product was designed to work with the factory intercoolers, and aftermarket intercoolers that mimic the factory inlet / outlet locations.


    Note: This kit is not compatible with the APPS mounted in the stock location on 2003-2005 trucks. You must relocate or purchase the Pusher APPS relocation bracket to use the Cross-Air on trucks equipped with a APPS.


    Pusher part number: PDC0307MCA

    Write a review

    Please login or register to review
    Cookie Notice
    Our website uses cookies to enhance your shopping experience. Continued use of our website gives us your consent for the use of cookies during your visit. Please view our privacy policy to see how these cookies are used.