





AA Custom Tuned Powervision 20-21 RZR Pro XP Turbo
Available Options
$575.00
- Part Number: 100-19-07
- Est. Ship Time: Usually Ships in 1-3 Business Days

SSL SECURE
TRANSACTION

AUTHENTIC
PRODUCTS

GUARANTEED PREMIUM
QUALITY

A+ Rating
More from this brand
Starting From $595.00
Starting From $1,495.00
- Tuners are in stock and ready to ship
- If you are looking for the most bad-ass custom tunes that are easily loaded to your RZR from the DynoJet Power Vision, you've found them! AA's performance tunes are offered loaded directly on the Power Vision ECU tuner. This versatile tuner allows our tunes to be easily uploaded to your factory ECU, switch between tunes, and even return to stock. The Power Vision is also a great gauge showing boost, timing and more. You can leave the Power Vision hooked up for gauges or completely remove it after flashing your ECU. The Power Vision also has excellent data logging capabilities, requiring only a simple download of the software and a computer. You can even view trouble codes and erase them on the fly. We are highly experienced with tuning these RZRs and it'll show the moment you put the pedal to the floor. The tunes are easily labeled and show rough horsepower claims with supporting mods such as exhaust and clutching. These tunes modify all the necessary maps to create big horsepower while still maintaining a safe and reliable RZR. Each tune is built specifically for your Power Vision allowing us to change the fan temp or other parameters if needed.
- Works with all 2020-21 RZR Pro XP Turbo models including Dynamix models. The Pro XP Turbo is an animal waiting to be unleashed. This models uses a factory upgraded turbo able to create more boost at lower temps quite like our turbo mod for the earlier version RZR XP Turbo. This allows us to push the limits further with just a tune. Several improvements including stronger head bolts allow the motor to handle the extra boost easier.
- Big horsepower gains depending on the level of tune desired
- Quicker throttle response and power delivery
- Throttle by wire limiters disabled
- Fan on/off at 185 degrees Fahrenheit (Stock is 190). The fan also ramps up in power quicker to keep you running cool.
- Optional start in any gear! Does not need to be in park to start. Will start without brake, but may throw a code. Press brake to start until we figure this issue out. Keep in mind this is removing a safety feature.
- Seat belt limiter disabled
- Speed limiter removed in low and high gears
- More throttle % and boost in low gear and reverse
- Rev limit at a safe 9300 RPM
- See how to install and use the tuner in this VIDEO
- No mess of having to send in your ECU & this device is a much safer way of programming. Simply plug in to your Diagnostic port, click tune, wait, and go ride!
- Very easy to use tuner that can also check and erase most trouble codes
- Easily data log 32 parameters with 1 push of a button and review on your windows computer later
- Tuner is updated with the latest firmware to make sure you have a smooth tuning process
- 1 Tune (along with your stock tune) are included in the initial price. Additional tunes are $50 each. We highly recommend 2 tunes so if poor fuel quality is an issue you can switch to a lower HP level.
- For reference; a Stock machine will dyno at 156-158 rear wheel horsepower, 181 crank HP per factory
- Tune levels 1-4 are developed on the stock wastegate setting with stock injectors. Tunes 5 & 6 are only available with our 1200cc injectors & require adjusting your wastegate rod. We also offer all tune Levels 1 through 6 designed for the 1200cc injectors & WG rod adjustment.
- The Level 1 tune is a modified stock power level tune but has better boost maps to help keep you in the power. We disable many limiters, raise the speed limit, rev limit, and make necessary fuel & timing changes. We maintain the max factory boost of 16.5-17 PSI.
- The Level 2 tune offers 17.5-18 PSI of boost with a 10-12 RWHP gain. This tune rips and can be used on a bone stock RZR in most cases. We highly recommend our billet blow-off/diverter valve and pre airbox intake tube. While not required, clutching helps transfer the power to the wheels much more efficiently. This tune can also be used with exhaust, charge tube, and intake tube.... etc. No wastegate adjustment required. 91-93 Octane tune.
- The Level 3 tune is a game changer! Hitting hard with a gain of 20-25 RWHP, this tune offers the highest boost possible (18.5-19 PSI) on 91-93 octane fuel. Due to the upgraded Pro XP turbo with higher exhaust flow and more efficient compressor housing, we can get away with higher boost on pump gas. These are absolutely huge power gains that will have you grinning from ear to ear. This tune is built to be a max tune on 91-93 octane. If you only have access to 91 octane and fuel quality is poor or you'll be running really hard that day, we'd suggest using a small amount of race gas or octane boost to bump your octane. This helps prevent engine knock which causes the ECU to retard your timing curve resulting in a slight power loss. Required Mods: High flow pre airbox intake tube, exhaust, Billet BOV, S3 Clutch Kit. Suggested Mod: Charge Tube as we have seen them fail on this level. No wastegate adjustment required.
- Level 4 - Beast mode - 200 RWHP! This tune is designed for 98-100 octane (will run on UTV 96, or most fuels up to 110 octane) and was developed using one can of VP Octanium to a tank of fuel. Mixing other race fuel with the tune to get 100 octane output would work great, just keep in mind consistently using leaded fuels can result in premature failure of O2 sensors. Now for the fun part.... this tune is INSANE and brings your Pro XP to a new level at 197-200 RWHP on our dyno. This tune gains 40-43 RWHP and pushes the boost level to 23-24 PSI peak before settling at 22-23 PSI. Keep in mind the Power Vision boost only reads to 22-23 PSI (depending on your altitude) so it will be close to maxing out the gauge. The ECU still has vision above that, but you won't be able to read it without a manual gauge. Required Mods: High flow pre airbox intake tube, exhaust, Charge Tube, Billet BOV, S3 Clutch Kit. Suggested mod: After airbox intake tube WITH catch can, torque head bolts tighter with 120 degrees more rotation. No wastegate adjustment required.
- Level 5 1200cc Injectors, Waste Gate Rod Shortened - Beast mode times x2 - 210 RWHP! This tune is designed for 108-110 octane Now for the fun part.... this tune is INSANE and brings your Pro XP to a new level at 210 rear wheel hp on our dyno. This tune gains 50-55rwhp on pushes the boost level to 24-25psi peak, then settles to 23-24psi. Keep in mind the powervision boost only reads to 22-23psi (depending on your altitude) so it will be close to maxing out the gauge. The ECU still has vision above that, but you won't without a manual gauge. There are a few other problems with this tune.... the speedometer struggles keep up with the wicked acceleration, and the tires won't stop burning off. Required Mods: High flow pre airbox intake tube, exhaust, Intake tube with catch can, Charge Tube, Billet BOV, S3 Clutch Kit. This requires shortening your wastegate rod as short as possible to 6.5-7psi crack pressure. Also requires torquing head bolts tighter with 120 degrees more rotation.
- Level 6 1200cc Injectors, Waste Gate Rod Shortened - Beast mode x3 - 215 RWHP! This tune is designed for E85 fuel. Now for the fun part.... this tune is simply stupid and brings your Pro XP to a new level at 215 rear wheel hp on our dyno. This tune gains 55-60rwhp on pushes the boost level to 24-25psi peak, then settles to 23-24psi. Keep in mind the powervision boost only reads to 22-23psi (depending on your altitude) so it will be close to maxing out the gauge. The ECU still has vision above that, but you won't without a manual gauge. There are a few other problems with this tune.... the speedometer struggles keep up with the wicked acceleration, and the tires won't stop burning off. Required Mods: High flow pre airbox intake tube, exhaust, Intake tube with catch can, Charge Tube, Billet BOV, S3 Clutch Kit. This requires shortening your wastegate rod as short as possible to 6.5-7psi crack pressure. Also requires torquing head bolts tighter with 120 degrees more rotation.
- Max boost levels are listed as reference only. Altitude, temperature, charge temps, intercooler temps and many other conditions play into a factor of final boost output. AA tunes do a better job of making sure you reach these levels as the factory tunes are overly safe, and have the EPA to deal with.
- If you have any other needs in these tunes, or any concerns; please e-mail!
- Oh... and get ready for your RZR to flat out rip!
Aftermarket Assassins part number: 100-19-07

If you are looking for an easy to use ECU tuner loaded with the most badass custom tunes on the market, you've found it! This Dynojet Powervisio..
$595.00
If you are looking for an easy to use ECU tuner loaded with the most badass custom tunes on the market, you've found it! This Dynojet Powervisio..
$595.00
2-3 Day lead time as clutches are built to order
Fits 2014-15 RZR 1000 XP Models 2 & 4 Seat
The absolute ultimate kit for your 2014-15 R..
$1,495.00
Fits: 2014-23 RZR XP 1000, 2016-Up RZR S/Trail 1000, RZR S/Trail/XC 900, General & General XP, Ranger 900 Models, & various other models using..
$225.00
Fits 2016-2020 RZR Turbo Models, 2014-24 RZR XP 1000, Xpedition, All General 1000, RS1, All RZR 900 S/Trail/XC, All RZR 1000 S/Trail S, All Ranger XP ..
$60.00
Our S2 recoil clutch kits pack a huge punch! No matter the terrain, they hit hard and just keep pulling for days. On the trail or at the r..
$395.00
Intake fits on all 2016-Up RZR XP Turbo & Turbo S ModelsDoes not fit RZR Pro XPIncreases airflow to the turbo to provide maximum horsepower, espec..
$175.00
Fits 2016-2020 RZR XP Turbo & Turbo S models, 2018-22 RS1 models, 2024 RZR XP 1000 models and 2024 Xpedition models
**Does NOT fit the 2021 P90X ..
$225.00
Our S2 recoil clutch kits pack
a huge punch! No matter the terrain, they hit hard and just keep
pulling for days. On the trail..
Starting From $295.00
Fits 2016-20 RZR XP Turbo & Turbo S Models 2 & 4 Seat** DOES NOT FIT 2021 MODELS**Clutches are built per order, please allow 1-3 day lead time..
$1,650.00
The factory charge tube is made from cheap plastic, is very small, and bottle necks in the middle. Whenever you bottleneck air, it makes that ai..
Starting From $175.00
Fits 2016-2023 RZR Turbo models including Turbo S & Pro XP/Turbo RDirect replacement for OEM controller which can clog and become faulty causing o..
$75.00
Looking for a header to complete the look for your slip on exhaust? Then you need the AA stainless XPT header. This is a 2.5" design which is th..
Starting From $350.00
Exhaust fits all 2017-Up Can Am Maverick X3 models including the 120HP, 154HP, 172HP, 195HP RR & 200HP RRHands down this is one of the best exhaus..
$795.00
Fits all X3 turbo 154hp, 172hp 195hp & 200hp models with the intercooler (might fit non intercooled 120hp as well, but have not verified this)
G..
$195.00
MILITARY-GRADE AIR FILTRATION FOR YOUR RZRDon’t let the elements slow you down. A clogged filter chokes your engine of power. The S&B Particle Sep..
$499.99
Replacement air filter by S&B Filters for 16-20 Yamaha YXZ100RFilter Type: Dry CleanablePart number: 66-6001B..
$75.00
MILITARY-GRADE AIR FILTRATION FOR YOUR RZRDon’t let the elements slow you down. A clogged filter chokes your engine of power. The S&B Particle Sep..
$499.99
Replacement air filter by S&B Filters for 17-20 Can Am Maverick X3Filter Type: Dry CleanablePart number: 66-6005..
$75.00
The S&B Particle Separator ejects 94% of the dusty air before it reaches your stock filter. This saves you time and money from constantly having t..
$434.99
The S&B Particle Separator ejects 94% of the dusty air before it reaches your stock filter. This saves you time and money from constantly having t..
$399.00
**Does not fit the Sport DPS model**The S&B Particle Separator ejects 94% of the dusty air before it reaches your stock filter. This saves you tim..
$434.99
The S&B Particle Separator ejects 94% of the dusty air before it reaches your stock filter. This saves you time and money from constantly having t..
$399.00
MILITARY-GRADE AIR FILTRATION FOR YOUR KRXDon’t let the elements slow you down. A clogged filter chokes your engine of power. The S&B Particle Sep..
$499.99
Part# KRTRZ21Fits; 2020-2021 Polaris RZR PRO XPCLICK HERE FOR INSTALLATION INSTRUCTIONSThis High Strength Stage 2 Tie Rod Kit is built with heavy..
$265.99
The innovative Dual-Color 18″ LED rear chase light. V3 by RLB, with its industry leading new modern design. The V3 is fully ..
$304.00
The innovative Dual-Color 22″ LED rear chase light. V3 by RLB, with its industry leading new modern design. The V3 is fully waterp..
$314.00
The innovative Dual-Color 36″ LED rear chase light. V3 by RLB, with its industry leading new modern design. The V3 is fully waterp..
$324.00
The innovative Dual-Color 30″ LED rear chase light. V3 by RLB, with its industry leading new modern design. The V3 is fully waterp..
$324.00
The innovative Dual-Color 30″ LED rear chase light. V3 by RLB, with its industry leading new modern design. The V3 is fully waterp..
$324.00