-80x80.jpg)
Peaks 4 Inch to 3 Inch Turbo Transition Boot
$0.00
- Part Number: 4-3 Reducer
- Est. Ship Time: Product Unavailable
SSL SECURE
TRANSACTION
AUTHENTIC
PRODUCTS
GUARANTEED PREMIUM
QUALITY
A+ Rating
More from this brand
Starting From $0.00
Starting From $0.00
-60x60w.jpg "88-02 Dodge 5.9L Cummins CrankCase Breather Relocation Kit")
Starting From $0.00
DiscontinuedIdeal for transitioning from 4" turbo inlet to 3" cold pipe in twin turbo set up
4-Ply brick red Aramid Fiber with Black Matte finish c..
$0.00
Contains one 2 3/8" x 3" ID Silicone Reducer Boot 4 1/2" Long with Logo, one 3" T-Bolt Clamp and one 2 3/8-2 1/2" T-Bolt Clam..
$60.14
DISCONTINUED
94-02 Dodge Hi-Performance Upper Intercooler Boot
Fits 94-02 Dodge
Replaces OEM intercooler boot
4-Ply brick red Aramid Fibe..
$0.00
Modified trucks which produce higher than stock boost pressures can and do dislodge the intercooler hoses, resulting in loss of manifold boost and pow..
$30.35
AutoMeter Z Series Boost Gauge 0-60 PSI Includes 6 ft. nylon tubing with 1/8" NPT fittings. Includes 1/4'' NPT adapter/fittings. Autometer: 2617..
$94.55
Auto Meter Triple Gauge Dash Top Mount for the 1998-2002 Dodge Cummins 5.9LOnly Auto Meter has the top quality dash top gauge mounts for your 1998-200..
$84.88
AutoMeter Z Series Boost Gauge 0-100 PSI Includes 6 ft. nylon tubing with 1/8" NPT fittings. Includes 1/4'' NPT adapter/fittings. Autometer: 2618..
$90.63
-250x250.jpg "MBRP Full Size Pickup Single Stack Mount Kit Aluminized")
UT4001 SMOKERS(tm) 4" Single Pipe Kit Fits All Full Sized Pick-up Beds **Image May Not Be Actual Product** For those who already have a 4" performanc..
$239.99
Schwitzer HT3B Turbo with a 26CM Turbine Housing with T6 Flange
Ideal for twins using a HX35 as the small charger!
Part number: 167049
There will b..
$960.83
These 304 Stainless Steel T-Bolt Clamps are perfect for high pressure/high heat intake or exhaust pipe coupling.
These clamps are smooth on the insid..
$3.99
AutoMeter Z Series 100-250 degree Transmission Temperature Gauge Includes 1/8" NPT Sender. Air-Core meter movement. Includes 3/8"" NPT adapter/fitt..
$84.48
This is a complete Interstate McBee upper cylinder head gasket set for the 24V Cummins engine. .
Fits all 98.5-2002 Dodge 5.9L 24 Valve Cummi..
$208.14
Set of 12 Rocker Arm Studs 98.5+ Dodge 5.9L & 6.7L Cummins Diesel
Torque these to 27 Ft/Lbs.
Washers are NOT Included in this Kit
Pleas..
$151.99
Backordered
Backordered with No ETA (Updated on 6/10/2025)
12mm Head stud kit for the 98.5-2012 Dodge 5.9L & 6.7L 24 Valve Cummins Turbo Diese..
$486.62
These 304 Stainless Steel T-Bolt Clamps are perfect for high pressure/high heat intake or exhaust pipe coupling.
These clamps are smooth on the ins..
$3.99
These 304 Stainless Steel T-Bolt Clamps are perfect for high pressure/high heat intake or exhaust pipe coupling.
Unlike some other t-bolt clamps av..
$3.99
Full set requires 6 pistons.
Mahle piston for the 98.5-2002 Dodge 24 Valve Cummins
One (1) Piston. Includes rings.
Standard Output Piston/Bow..
$148.46
2 Inner Springs to Convert 3k gsk to a 4k gsk.94-98 Dodge 12 Valve Cummins
Only designed to work with Peak Diesel Performance 3K governor spring kits..
$19.99
DISCONTINUEDApplication: 03-07 Dodge Ram Cummins 5.9L DieselPerformance Intercooler Boot & Clamp KitSuperior material, stays on, holds more ..
$0.00
DISCONTINUEDApplication: 03-07 Dodge Ram Cummins 5.9L Diesel07.5-2009 6.7L Cummins
Performance Turbo to Intercooler tube connector boot & 2..
$0.00
-250x250w.jpg "88-02 Dodge 5.9L Cummins CrankCase Breather Relocation Kit")
Product Unavailable (11/25/2024)
Tired of spots on your driveway, oil on your radiator, an oily mess in your engine compartment?
Give the Cummins ..
$0.00
DISCONTINUEDPeak Intercooler Boot & Clamp Kit
Application: 94- 02 D..
$0.00
DISCONTINUED
94-02 Dodge Hi-Performance Upper Intercooler Boot
Fits 94-02 Dodge
Replaces OEM intercooler boot
4-Ply brick red Aramid Fibe..
$0.00
Discontinued (Updated 6/17/2024)
3000 RPM Governor Spring Kit (3K GSK)
This kit allows your engine to have full fueling to approximately 3000RPM..
$0.00
Discontinued (Updated 3/17/2025)
4000 RPM Governor Spring Kit (4K GSK)
The Peak Diesel Governor Spring Kit is a special combination of springs a..
$0.00
4000 RPM Governor Spring Kit with 12 Heavy Duty Valve 60lb Springs
The Peak Diesel Governor Spring Kit is a special combination of Bosch springs a..
$0.00
Product Unavailable (Updated 7-18-24)
OUR KIT CONTAINS:
RTV SENSOR SAFE ULTRA GRAY GASKET MAKER
KDP TAB
FRONT SEAL
LOCKTITE
&nbs..
$0.00
DISCONTINUED (7-31-23)Are they purdy? Nope, but they'll hold 60 pounds of boost and they are made in the good old U.S.A. Not knock-offs like most othe..
$0.00
4-3/8” to 3-1/2” Reducer:
This 2-3/4” long coupling is designed to connect to tubes with a 4-3/8” and 3-1/2” diameter. ..
$21.00
4-5/32” to 3-3/4” Reducer:
This 2-11/32” long coupling is designed to connect to tubes with a 4-5/32” and 3-3/4” diamet..
$21.00
Description: 4Ply Aramid Reinforced Hump Hose Connector with 3 Reinforcement Rings
Material: Multi-Ply Aramid R..
$43.99
This Vibrant 22908 90 Degree Push-On Hose Fitting is designed to work with the Vibrant Push-On Hose. This Push on Hose Fitting comes with an aluminum ..
$21.99
3-1/2” Internal Diameter:
This 3” long coupling is designed to connect to a tube with a 3-1/2” diameter. It’s commonly used o..
$21.00
4” Internal Diameter:
This 3” long coupling is designed to connect to a tube with a 4” diameter. It’s commonly used on aFe PO..
$21.00
4” Internal Diameter:
This 4” long coupling is designed to connect to a tube with a 4” diameter. It’s commonly used on aFe PO..
$21.00
4-1/4” Internal Diameter:
This 3” long coupling is designed to connect to a tube with a 4-1/4” diameter. It’s commonly used o..
$21.00
4-1/8” Internal Diameter:
This 3” long coupling is designed to connect to a tube with a 4-1/8” diameter. It’s commonly used o..
$21.00
The AFE 59-00004 4-3/4" Magnum Force Hump Coupling is the perfect replacement for any worn, torn, or damaged couplers in your intake system. The ..
$21.00
Fleece Performance -8AN Female Swivel to 7/8-14 O-ring
Fitting Style: Straight Swivel Adapter
Fitting Category: AN flare to O-ring ..
$13.99
Fleece Performance -8AN to 3/4-16 O-ring, 90 Degree Fitting
Fitting Style: 90 degree Adapter
Fitting Category: AN flare to O-ring ..
$24.99
Fleece performance 1/2" Hose Barb to 3/4"-16 O-ring (-8 AN)
Features:
Male AN straight thread O-Ring Boss (ORB) fitting with O..
$10.99
Our Fleece Performance high quality stainless steel 1/2" feed fitting is designed and manufactured in-house to allow for increased fuel feed..
$15.95
Our Fleece Performance high quality stainless steel fitting is designed and manufactured in-house to allow return fuel to freely flow from your CP3.
..
$15.95