Universal Hoses & Elbows

4-3/8” to 3-1/2” Reducer:This 2-3/4” long coupling is designed to connect to tubes with a 4-3/8” and 3-1/2” diameter. It’s commonly used on aFe POWER cold air intake systems, but can be used for a variety of projects.Polyurethane Construction:Its flexible, injection molded polyurethane construction ..

4-5/32” to 3-3/4” Reducer:This 2-11/32” long coupling is designed to connect to tubes with a 4-5/32” and 3-3/4” diameter. It’s commonly used on aFe POWER cold air intake systems, but can be used for a variety of projects.Polyurethane Construction:Its flexible, injection molded polyurethane construct..

3-1/2” Internal Diameter:This 3” long coupling is designed to connect to a tube with a 3-1/2” diameter. It’s commonly used on aFe POWER cold air intake systems, but can be used for a variety of projects.Polyurethane Construction:Its flexible, injection molded polyurethane construction is designed to..

4” Internal Diameter:This 3” long coupling is designed to connect to a tube with a 4” diameter. It’s commonly used on aFe POWER cold air intake systems, but can be used for a variety of projects.Polyurethane Construction:Its flexible, injection molded polyurethane construction is designed to meet st..

4” Internal Diameter:This 4” long coupling is designed to connect to a tube with a 4” diameter. It’s commonly used on aFe POWER cold air intake systems, but can be used for a variety of projects.Polyurethane Construction:Its flexible, injection molded polyurethane construction is designed to meet st..

4-1/4” Internal Diameter:This 3” long coupling is designed to connect to a tube with a 4-1/4” diameter. It’s commonly used on aFe POWER cold air intake systems, but can be used for a variety of projects.Polyurethane Construction:Its flexible, injection molded polyurethane construction is designed to..

4-1/8” Internal Diameter:This 3” long coupling is designed to connect to a tube with a 4-1/8” diameter. It’s commonly used on aFe POWER cold air intake systems, but can be used for a variety of projects.Polyurethane Construction:Its flexible, injection molded polyurethane construction is designed to..

The AFE 59-00004 4-3/4" Magnum Force Hump Coupling is the perfect replacement for any worn, torn, or damaged couplers in your intake system. The polyurethane hump coupler is designed to connect to a 4-3/4" OD tube and is 3" long. The polyurethane construction is designed to meet modern elevated engi..

The Vibrant 11998 -8AN 50' Roll of Black Nylon Braided Flex Hose is a lightweight hose that is great for oil, water, fuel or coolant. This hose features a braided nylon cover, operating pressure of 500 PSI, E85 compatible and an operating temperature range of -40 degrees to 300 degrees Fahrenheit.FE..

The Vibrant 16318 -8AN Push-On Flex House allows to plumb your custom fuel system. The black nitrile rubber hose has an operating pressure of 250PSI and features a .50 ID with a temperature use range of -30 degrees F to 160 Degrees F. 10 foot rolll.FEATURES:AN Size: -8Hose ID: 0.50"Operating Pressur..

The Vibrant 16328 -8AN Push-On Flex House allows to plumb your custom fuel system. The black nitrile rubber hose has an operating pressure of 250PSI and features a .50 ID with a temperature use range of -30 degrees F to 160 Degrees F. 20 foot roll.FEATURES:AN Size: -8Hose ID: 0.50"Operating Pressure..

Vibrant Performance Reducer Coupler, 3.00" I.D. x 4.00" I.D. x 3.00" long - BlackMaterial: Non Reinforced SiliconeWarranty: One Year Limited WarrantyInlet I.D. - 4.00"Outlet I.D. - 3.00"Length: 3.00"Wall Thickness: 0.18"Color: Black- Includes pair of Stainless Steel worm gear clamps.-..

Part #: 11821    Description: CAC Hose, 3.50" I.D. x 6.00" long - BlackMaterial: 4 Ply Aramid Reinforced Silicone, Stainless Steel RingsWarranty: One Year Limited WarrantyMSRP: $52.99 USDNotes:Part Specifications-----------------------------------------------------..

90 Degree Mandrel Bend, 5.00" O.D.Made from T304 Stainless SteelFive Year Limited WarrantyTube O.D. - 5.00"CLR: 7.50"Leg Length A: 6.00"Leg Length B: 6.00"Tube Thickness: 0.065"- Ideal for building custom exhaust systems, headers, downpipes, intercooler piping, etc....- T304 Stainless Steel is a non..

10ft Roll of Vibrant Performance Black Nylon Braided Flex Hose; AN Size: -10; Hose ID: 0.56"Material: Synthetic Rubber/Nylon- E85 Friendly- Black Braided Nylon Cover- Lightweight and Durable- Suitable for use with Oil, Water, Fuel and Coolant- Capable of handling operating temperatures ranging from ..

Description: Swivel Hose End Fitting, 90 Degree; Size: -8ANMaterial: AluminumWarranty: One Year Limited WarrantyAvailable in Anodized Black finish only.Part #: 21908   ..

Vibrant Performance Male Hose End Fitting, 90 Degree; Size: -10AN; Thread: (12) 1-1/6"-12Material: AluminumWarranty: One Year Limited WarrantyPart Number: 24909..

Description: Straight Swivel Hose End Fitting; Size: -8ANMaterial: 6061 Aluminum AlloyWarranty: One Year Limited WarrantyAvailable in Anodized Black finish only.Part #: 21008..

High temp oil resistant drain hose, black or blue (color may vary). This is the correct diameter for the stock 89-02 Dodge 5.9L Cummins turbo drain hose, it is a hard size to find.7/8" ID *price is per the foot...

Backordered with No ETA   **Updated on 05/23/2022** Modified trucks which produce higher than stock boost pressures can and do dislodge the intercooler hoses, resulting in loss of manifold boost and power. The cool blue intercooler hump hose for Ford and Dodge turbo diesels stops this pr..

Cummins Filtration/Fleetguard 5.5"ID one side, 5"ID on the other side Hump hose reducer for use with air cleaners 6" Long      ..

Backordered with No ETA   **Updated on 06/17/2022**Intercooler to tube connection transition hose.  3"x 3.5"ID x 8" long. This hose is often used to install a Banks 6.0L Ford Techni-Cooler into the 99-2003 Powerstrokes with 7.3L engines. Part# OH105..

Specifically designed for High Performance Diesels!Drag racing and sled pulling places huge stress on your truck’s parts in a very short period of time. But PPE’s hoses were designed to handle the rigors of racing and competition. They are equally proficient at the job of towing heavy loads over..

With a burst rating of over 200psi., PPE’s Performance Silicone Hoses won’t leave you at the line while the competition leaves you in the dust. Each PPE Performance Silicone Hose is strengthened with 5 plies of polyester-reinforced fibers and the Fluorocarbon-lined, silicone-rubber construction ensu..

Ideal for transitioning from 4" turbo inlet to 3" cold pipe in twin turbo set up4-Ply brick red Aramid Fiber with Black Matte finish cover  3 inch overall length Made in the USAPlease note! This intercooler boot is shipped from Washington State. For customers on the East Coast, transit ti..

Lead Time of 3-5 Business Days!WCFab Heavy Duty 2 3/8" x 3" Silicone Boot 4.5" Long with steel enforced liner. Used for Duramax Factory Turbo compressor outlets.May also fit other applications. WCFab part number: 203-33..

5 PLY - Extreme Duty Silicone 2.75" INSIDE DIAMETER x 3" INSIDE DIAMETER - REDUCER 4" LENGTH Black4" LengthStainless Diesel part number: BH2.75_3x4RH..

5 PLY - Extreme Duty Silicone 4" INSIDE DIAMETER x 5" INSIDE DIAMETER - REDUCER 4" LENGTH BlackStainless Diesel part number: BH4_5x4RH  ..

This is a 45° EDPM rubber intake boot. It is 5" at both ends and is used for S400 intake pipes. It comes with clamps.Crazy Carl's part number: 45* Intake Boot This is a Special Order Part, Please Allow 1-2 Weeks for shipping...

With a burst rating of over 200psi., PPE’s Performance Silicone Hoses won’t leave you at the line while the competition leaves you in the dust. Each PPE Performance Silicone Hose is strengthened with 5 plies of polyester-reinforced fibers and the Fluorocarbon-lined, silicone-rubber construction ensu..

3/4in Hi-Temp Silicon Oil Drain Hose. Sold by the foot. Part Number: HTODH.75..

5 PLY - Extreme Duty Silicone 3" INSIDE DIAMETER 4" LENGTH BLACK COLORStainless Diesel part number: BH3_3x4SHH  ..

Backordered with No ETA   **Updated on 07/21/2022**Cummins Filtration/Fleetguard 5.5"ID one side, 4"ID on the other side Hump hose reducer for use with air cleaners 6" Long ..

Backordered ETA 04/30/2020 (updated 02/06/2020)DieselSite introduced aramid boots to the market almost 5 years ago. We wanted the best oil and heat resistance properties we could get along with superior strength. Silicone hoses are incompatible with oil and will start to break down over time. Ou..

5 PLY - Extreme Duty Silicone 3.5" INSIDE DIAMETER x 4" INSIDE DIAMETER - REDUCER 4" LENGTH BlackStainless Diesel part number: 3.5"/4" reducer boot  ..

With a burst rating of over 200psi., PPE’s Performance Silicone Hoses won’t leave you at the line while the competition leaves you in the dust. Each PPE Performance Silicone Hose is strengthened with 5 plies of polyester-reinforced fibers and the Fluorocarbon-lined, silicone-rubber construction ensu..

Applications: Joining your intake pipe to the throttle body assembly, air metering assembly, intercooler, BOV pipe, or turbo inlet/outlet. Custom compressor, intercooler or inlet piping for turbo/supercharged car Custom cold air intake for nonturbo car Replacement of all factory rubber parts Th..

45 Deg Rubber Reducer Elbow, Use with our Stainless Steel T-bolt Clamps.This is a non-returnable part..

Description:     4 Ply Silicone Sleeve, 4" I.D. x 3" longMaterial:     4 Ply Reinforced SiliconeWarranty:     One Year Limited Warranty       Silicone Sleeve Specifications:Inlet I.D. - 4" Outlet I.D. - 4" Length: 3" Wall Thickness: 0.18" Burst Strength: 40 psi Color: Black, Blue, or Red ..

Description:     4 Ply Hump Hose, 3" I.D. x 3" longMaterial:     4 Ply Reinforced SiliconeWarranty:     One Year Limited Warranty       Hump Hose Specifications:Inlet I.D. - 3" Outlet I.D. - 3" Length - 3" Burst Strength - 120 psi Color - Black, Blue, or RedVibrant Part number: 2734..

With a burst rating of over 200psi., PPE’s Performance Silicone Hoses won’t leave you at the line while the competition leaves you in the dust. Each PPE Performance Silicone Hose is strengthened with 5 plies of polyester-reinforced fibers and the Fluorocarbon-lined, silicone-rubber construction ensu..

With a burst rating of over 200psi., PPE’s Performance Silicone Hoses won’t leave you at the line while the competition leaves you in the dust. Each PPE Performance Silicone Hose is strengthened with 5 plies of polyester-reinforced fibers and the Fluorocarbon-lined, silicone-rubber construction ensu..

Description:     4 Ply Hump Hose, 3.5" I.D. x 3" longMaterial:     4 Ply Reinforced SiliconeWarranty:     One Year Limited Warranty       Hump Hose Specifications:Inlet I.D. - 3.5" Outlet I.D. - 3.5" Length - 3" Burst Strength - 120 psi Color - Black, Blue, or RedVibrant Part number: 273..

Cummins Filtration/Fleetguard 5"ID one side, 5"ID on the other side Hump hose connector for use with air cleaners 6" Long Picture for representation only. Fleetguard: 3316610S     ..

Applications: Joining your intake pipe to the throttle body assembly, air metering assembly, intercooler, BOV pipe, or turbo inlet/outlet. Custom compressor, intercooler or inlet piping for turbo/supercharged car Custom cold air intake for nonturbo car Replacement of all factory rubber parts Th..

Applications: Joining your intake pipe to the throttle body assembly, air metering assembly, intercooler, BOV pipe, or turbo inlet/outlet. Custom compressor, intercooler or inlet piping for turbo/supercharged car Custom cold air intake for nonturbo car Replacement of all factory rubber parts Th..

Backordered til Mid October   **Updated on 08/03/2022**Cummins Filtration/Fleetguard Hump hose reducer for use with air cleaners 5.5 inches long. 5" ID on one side, 4" ID on other side...