-80x80.jpg)
S475 Exhaust Outlet Flange & Clamp, Steel 5 Inch
$0.00
- Part Number: S475EXH 5 INCH
- Est. Ship Time: Product Unavailable
SSL SECURE
TRANSACTION
AUTHENTIC
PRODUCTS
GUARANTEED PREMIUM
QUALITY
A+ Rating
More from this brand
Starting From $2,261.29
Starting From $2,322.00
Starting From $1,921.34
Starting From $2,224.87
Hamilton Diesel's 12 valve springs were designed to fix many of the problems in the 12v valvetrain.
Factory and “60lb” springs do not h..
$389.00
DISCONTINUEDImage may not be exact part, for representation only..
$0.00
Dual Valve Cover Breather for the 89-98 5.9L 12 Valve Cummins DieselsAllows you to attach a hose to the valve cover to vent blowby.Great for high mile..
$506.66
Two Gauge A Pillar Mount -Replaces the Factory A Pillar by Bolting on Instead of Having to Cut the Handle Off of the Factory A Pillar and Mounting on ..
$115.91
AutoMeter Phantom Boost Gauge 0-100 PSI Includes 6 ft. nylon tubing with 1/8" NPT fittings. Includes 1/4'' NPT adapter/fittings. Autometer: 5706..
$93.68
HX40 Turbo-Exhaust V-Band Clamp
This is a replacement turbine outlet v-band clamp for the HE351VGT & HE300VGT Turbocharger, normally fo..
$49.00
Three Gauge A Pillar Mount -Replaces the Factory A Pillar by Bolting on Instead of Having to Cut the Handle Off of the Factory A Pillar and Mounting o..
$123.20
Dodge 94-2002 Cummins HX40, Turbo 4" Downpipe
Fits the HTT HTB line of turbos, along with HX40 turbos.
4" flat flange downpipe.
Does ..
$180.27
94-98 12 Valve Cummins "Killer" Dowel Pin Tab AKA KDP tab
Cummins: 3958017..
$6.55
Cummins P7100 Pump gear key.
This key is ONLY used if you have an adjustable pump gear. This is not a "factory" piece that is used ..
$3.96
Ultra-Torque Assembly Lube
w/Brush Top Container
1 Pint Can
Gets you within 5% of the required pre-load on the first pull and stays consi..
$35.27
94-02 Dodge 5.9L Cummins Diesel Rigid Turbo Drain Tube
This is the piece that comes stock on 94-02 Dodge 5.9L Cummins diesel trucks.
Cummins: 39..
$92.79
98.5-2017 5.9L & 6.7L Cummins Diesel Multi-Layer Exhaust Manifold Gaskets, Set of 6
Cummins Part number: 5447591...
$56.80
Enables the adjustment of clutch pedal as well as allows for a heavier plate load...
$309.38
PDP Pick
Center dump COMPETITION series Steed Speed Exhaust Manifold
Available in a T4 or T6 turbo exhaust flange.
This header has been designed for those ..
$1,170.00
LLY 63mm 5 Blade Mafia Drop-in turboBrand new turbocharger. Rated at 660hp. This turbo is an excellent choice for towing, daily driving, or competing ..
$2,261.29
LLY 65mm 5 Blade Mafia Drop-in turboBrand new turbocharger. Rated at 725hp. This turbo is an excellent choice for towing, daily driving, or competing ..
$2,322.00
61/62 Stock+ LML 5 Blade Mafia Drop-in turboBrand new turbocharger. This turbo is an excellent choice for towing, daily driving, or competing in..
$1,921.34
LML 63mm 5 Blade Mafia Drop-in turboBrand new turbocharger. Rated at 660hp. This turbo is an excellent choice for towing, daily driving, or competing ..
$2,224.87
01-04 Duramax LB7 IHI 63/67These are built from new units. NO CORE! If you're looking for some serious stock appearing, bolt in power this is th..
$1,810.05
01-04 Duramax LB7 IHI 67/67These are built from new units. NO CORE! If you're looking for some serious stock appearing, bolt in power this is th..
$2,012.40
This is a drop-in replacement for 2003-2007 5.9
Whether you are looking to replace your old worn-out stock turbo with a simple bolt on up..
$1,209.06
This is a drop-in replacement for 2003-2007 5.9Whether you are looking to replace your old worn-out stock turbo with a simple bolt on upgrade, sneak p..
$1,263.69
This is a drop-in replacement for 2003-2007 5.9Whether you are looking to replace your old worn-out stock turbo with a simple bolt on upgrade, sneak p..
$1,466.05
This is a drop-in replacement for 2003-2007 5.9Whether you are looking to replace your old worn-out stock turbo with a simple bolt on upgrade, sneak p..
$1,516.64
This is a drop-in replacement for 2003-2007 5.9
Whether you are looking to replace your old worn-out stock turbo with a simple bolt on up..
$1,718.99
This power package includes our Billet 5Blade Mafia drop in compressor wheel as well as our high flow 10 blade turbine wheel for an overall increase i..
$554.34
6.0 Powerstroke 5 Blade 61/66 Drop-inThe Stainless Diesel '6.0 Stock+ 5blade Mafia™ turbocharger is a drop-in upgrade for your 2003-2007 6.0 Powerstro..
$1,364.87
6.0 Powerstroke 5 Blade 63/66 Drop-inThe Stainless Diesel '6.0 CAPO' 5blade Mafia™ turbocharger is a drop-in upgrade for your 2003-2007 6.0 Powerstrok..
$1,516.64
6.0 Powerstroke 5 Blade 65/67 Drop-inThe Stainless Diesel '6.0 Little Dixie' 5blade Mafia™ turbocharger is a drop-in upgrade for your 2003-2007 6.0 Po..
$1,649.18
This clamp features a welded flap design to prevent leakage at the closing point, it features .030" gauge 304 stainless steel. Includes grade 8 r..
$18.20
With their high torque design, these band clamps offer a tighter seal versus conventional u-clamps and flat band clamps. Premium Stainless Steel Torca..
$119.00
The AP Exhaust H312 is an extra heavy duty 3-1/2" saddle clamp featuring a 3/8" U-Bolt with an 11 Ga. Saddle. Constructed from mild steel.
..
$4.72
V-band assemblies are the most versatile and reliable way to connect your exhaust components. With V-band assemblies, you achieve the flexibility to i..
$55.99
These 304 stainless steel V-band clamps are designed for clamping exhaust components together.Please Note: By popular request, these clamps have been ..
$20.00
The AP Exhaust 9492 4" Chrome Plated Flat Band U-Bolt Clamp is for use on 4" exhaust systems and features a "flat band" instead of a standard u-bolt. ..
$21.73
The AP Exhaust 9503 4" Zinc Plated Flat Band U-Bolt Clamp is for use on 4" exhaust systems and features a "flat band" instead of a standard u-bolt. Th..
$6.13
The AP Exhaust H500Z Extra Heavy Duty 5" Saddle Clamp is a superior quality clamp that is excellent for upgrading or maintaining the exhaust system in..
$7.67
The AP Exhaust 9504 5" Zinc Plated Flat Band U-Bolt Clamp is for use on 5" exhaust systems and features a "flat band" instead of a standard u-bolt. Th..
$7.12
3" extra heavy duty saddle clamp by AP Exhaust is constructed from mild steel and features a 3/8" U-Bolt with an 11 gauge saddle. Part number: H3..
$4.68
If your truck is equipped with a flatbed, utility bed, or if you have a snow plow truck that is subjected to heavy rust and corrosion, this bracket ma..
$71.25
This clamp features a welded flap design to prevent leakage at the closing point, it features .030" gauge 304 stainless steel. Includes grade 8 r..
$17.17
This adapter allows you to convert your 3" outlet to a 4" or 4 3/8" to have a true 4" Exhaust outlet. Or replace your HX40 tu..
$89.99
With their high torque design, these band clamps offer a tighter seal versus conventional u-clamps and flat band clamps. Premium Stainless Steel Torca..
$113.00
Unique heavy duty butt connect band clamp. Only band clamp on the market that will suppport (2) 2.5" butt connected pipes as good as being welded toge..
$30.75