-80x80.jpg)
S400 & HT60 3.5 Inch V Band Compressor Housing Clamp
$19.95
- Part Number: 010410-4
- Est. Ship Time: Usually Ships in 1-2 Business Days
SSL SECURE
TRANSACTION
AUTHENTIC
PRODUCTS
GUARANTEED PREMIUM
QUALITY
A+ Rating
More from this brand
Starting From $1,125.00
Starting From $1,594.95
Starting From $1,684.95
S400 air outlet v-band flange tapered to 16ga tube. Comes with matching USA made matching clamp. These flanges measure 4.21″ total outside diameter. F..
Starting From $54.90
Product Unavailable (Updated 11/9/2023)This is a non-returnable part5" V-clamp for HT3B or S400 exhaust outlet. For use with #0406B.
**PLEASE BE ADV..
$0.00
T6 Turbo Flange Gasket, Divided.
Fits most HT3B turbos as well...
$12.00
-10 %
Clamps cast iron exhaust elbow to turbo exhaust housing.Replaces Chrysler part number 05159965AA.
Cummins: 3535399
..
$61.68 $68.53
This is a non-returnable part5" exhaust flange for HT3B or S400. Will require V-Band clamp #0408 to clamp on to Turbo
**PLEASE BE ADVISED THERE ARE ..
$0.00
Hot
PDP Pick
-10 %
Fleetguard LF16035 Oil Filter
Most filters look the same on the outside. It's what's inside that counts. Cummins Filtration exclusively designed ..
$18.99 $21.10
Turbo inlet weld flange. Round 5" billet aluminum weld flange to 3.5" v-band flange. Other sizes on each end may be available just ask.
Compressor ho..
$49.95
-10 %
Air Transfer Tube O-Ring ONLY!
Cummins part number: 3066211Includes number 1 from image ONLY!..
$11.20 $12.44
Includes plug only. 22mm.
This SHOULD fit 94-01 Cummins engines, however if your oil pan has been swapped or you have an industrial applicati..
$22.77
-10 %
94-2018 Dodge 5.9L & 6.7L Cummins Stock Exhaust Manifold Turbo Studs (4)M10 X 1.5 X 44.0 mm
Part # 3818823x4
Image For Reference Only..
$68.80 $76.44
Commonly used on 03-2011 Dodge 5.9L & 6.7L trucks that upgrade to the center dump 3 piece exhaust manifolds. This drain tube is longer than stock ..
$109.96
Cummins 12 valve and 24 valve lift pump block off plate. Covers the hole on 89-98 12 Valves that would normally have a lift pump bolted into it...
$22.95
PDP Pick
The only manifold available to give a substantial gain in power and fuel economy.
Not cheap cast and not weak tubular. This is the finest fully CNC..
$700.00
CNC'd T-6 Mild Steel Flange. Best flowing T-6 to round pipe flange you will find!
Works with 4" & 3.5" pipe
Stainless Dies..
$146.71
These 304 Stainless Steel T-Bolt Clamps are perfect for high pressure/high heat intake or exhaust pipe coupling.
These clamps are smooth on the ins..
$3.99
Proven for over a decade on many top level competition pulling trucks and drag trucks who needed to mount p-pumps or Sigma pumps on 2003 and up 5.9L a..
$1,125.00
Used on competition pulling trucks who need to mount p-pumps or Sigma pumps on 2003 and up 5.9L and 6.7L Cummins common rail engine blocks to utilize ..
$1,594.95
Used on competition pulling trucks who need to mount p-pumps or Sigma pumps on 2003 and up 5.9L and 6.7L Cummins common rail engine blocks to utilize ..
$1,684.95
Used on competition pulling trucks who need to mount p-pumps or Sigma pumps on 2003 and up 5.9L and 6.7L Cummins common rail engine blocks to utilize ..
$1,684.95
One piece billet valve cover fits 4BT Cummins 8 valve. Designed for aftermarket injection lines run either over top or around front and back of cover...
$479.95
One piece billet valve cover fits 4BT Cummins 8 valve. Notched to fit over stock injection lines. We also have non-notched valve covers for engines wi..
$479.95
Fits Cummins 4BT 4 Cylinder engine, includes o-ring to seal against block and stainless hardware. This cover doesn’t have a breather port so it is use..
$280.00
Cummins 12 valve and 24 valve lift pump block off plate. Covers the hole on 89-98 12 Valves that would normally have a lift pump bolted into it...
$22.95
Fits 12 Valve Cummins engine with stock gear housing. Requires factory gasket (not included), can use factory fan with stock 12 valve dampener and bel..
Starting From $449.95
One piece billet valve cover fits 1989 to 1993 1st gen 5.9L Cummins 12 valve engines. Notched to fit over stock injection lines. 3.25″ total height wi..
$679.95
One piece billet valve cover fits 1989 to 1993 1st gen 5.9L Cummins 12 valve engines. Notched to fit over stock injection lines.3.25″ total height wil..
$709.95
Fits 12 Valve Cummins engine with stock gear housing. Requires factory gasket (not included), can use factory fan with stock 12 valve dampener and bel..
Starting From $495.00
6 o-rings and 6 copper washers to reseal Keating Machine 12 valve billet valve covers.
Keating: (6) M8 copper washers & (6) -158 o-rings
..
$20.00
Set of 12 titanium retainers with hardened steel locks. Fits 12 Valve Cummins engines with single valve springs that are stock OD for example 60 pound..
$330.00
Fits 12 Valve Cummins engine with stock gear housing. Requires factory gasket (not included), can use factory fan with stock 12 valve dampener and bel..
Starting From $449.95
This clamp features a welded flap design to prevent leakage at the closing point, it features .030" gauge 304 stainless steel. Includes grade 8 r..
$18.20
With their high torque design, these band clamps offer a tighter seal versus conventional u-clamps and flat band clamps. Premium Stainless Steel Torca..
$119.00
The AP Exhaust H312 is an extra heavy duty 3-1/2" saddle clamp featuring a 3/8" U-Bolt with an 11 Ga. Saddle. Constructed from mild steel.
..
$4.72
V-band assemblies are the most versatile and reliable way to connect your exhaust components. With V-band assemblies, you achieve the flexibility to i..
$55.99
These 304 stainless steel V-band clamps are designed for clamping exhaust components together.Please Note: By popular request, these clamps have been ..
$20.00
The AP Exhaust 9492 4" Chrome Plated Flat Band U-Bolt Clamp is for use on 4" exhaust systems and features a "flat band" instead of a standard u-bolt. ..
$21.73
The AP Exhaust 9503 4" Zinc Plated Flat Band U-Bolt Clamp is for use on 4" exhaust systems and features a "flat band" instead of a standard u-bolt. Th..
$6.13
The AP Exhaust H500Z Extra Heavy Duty 5" Saddle Clamp is a superior quality clamp that is excellent for upgrading or maintaining the exhaust system in..
$7.67
The AP Exhaust 9504 5" Zinc Plated Flat Band U-Bolt Clamp is for use on 5" exhaust systems and features a "flat band" instead of a standard u-bolt. Th..
$7.12
3" extra heavy duty saddle clamp by AP Exhaust is constructed from mild steel and features a 3/8" U-Bolt with an 11 gauge saddle. Part number: H3..
$4.68
If your truck is equipped with a flatbed, utility bed, or if you have a snow plow truck that is subjected to heavy rust and corrosion, this bracket ma..
$71.25
This clamp features a welded flap design to prevent leakage at the closing point, it features .030" gauge 304 stainless steel. Includes grade 8 r..
$17.17
This adapter allows you to convert your 3" outlet to a 4" or 4 3/8" to have a true 4" Exhaust outlet. Or replace your HX40 tu..
$89.99
With their high torque design, these band clamps offer a tighter seal versus conventional u-clamps and flat band clamps. Premium Stainless Steel Torca..
$113.00
Unique heavy duty butt connect band clamp. Only band clamp on the market that will suppport (2) 2.5" butt connected pipes as good as being welded toge..
$30.75