
S400 4 5/8
Available Options
$90.05
- Part Number: FADPT351/40
- Est. Ship Time: Usually Ships By Next Business Day

SSL SECURE
TRANSACTION

AUTHENTIC
PRODUCTS

GUARANTEED PREMIUM
QUALITY

A+ Rating
More from this brand
Starting From $2,261.29
Starting From $2,322.00
Starting From $1,921.34
Starting From $2,224.87
S400 4 5/8" & 4 3/8 to 4" HX40 adapter
**ie. S400 T-4 exhaust housing with 4 5/8" or 4 3/8 turbo outlet to HX40 downpipe.
(adaptor is 1in. wide flange to flange.)
Old Part number: EDS42HX40

DiscontinuedThe EasySeal offers the best value in wideband exhaust clamps. Used for joining exhaust members of the same diameter. The unique design ma..
$0.00
Stainless HX 40 v-band clamp for Holset HX40 and Schwitzer / Borg Warner S300 variants with 4" HX40 exhaust outlet.
Fits turbo to cast iron el..
$40.00
Dodge Cummins 5.9L/6.7L 12V/24V, 8 pieces Flexplate Bolt Kit
These are for a automatic flexplate will not work for manual flywheel.
ARP: 147-2901
..
$60.81
Air Transfer Tube, includes O-Ring & V-Band Clamp, Fits A5K, HX60, & S400 Compressor outlets.
Also known as a compressor outlet discharge elbow.
3 i..
$233.85
Air Transfer Tube O-Ring ONLY!
Cummins part number: 3066211Includes number 1 from image ONLY!..
$12.44
5 PLY - Extreme Duty Silicone
4" INSIDE DIAMETER x 5" INSIDE DIAMETER - REDUCER
4" LENGTH
Black
Stainless Diesel part number: BH4_5x4RH
&n..
$34.40
T4 Flange Turbo to Manifold Gasket
Divided T4 turbo flange gasket.
Part number: 407294-0001..
$9.11
Installing a new exhaust manifold, or simply removing a stock or aftermarket manifold to change gaskets? If so, you'll find that it is a real hassle t..
$52.99
Cummins Part Number: 3935821..
$119.88
This v-band clamp to be used with Hx40 flange, part # VC400hX40
..
$40.63
Standard S400 Rebuild kit comes with:
brass thrust bearing
brass main bearings
oil sheild
seal plate o-ring & piston ring
turbine seal..
$156.82
Billet P7100 Pump Lock Pin. WAY cheaper than the junk plastic piece from Bosch!
Contagious Diesel Performance part Number: CON9498PTLP..
$30.00
HX40 Turbo-Exhaust V-Band Clamp
This is a replacement turbine outlet v-band clamp for the HE351VGT & HE300VGT Turbocharger, normally fo..
$49.00
Turbo Compressor Discharge Adapter w/ 3-Inch Outlet
Kit Includes:
90* Discharge Adapter
S400 Vband Compressor Outlet Clamp
O-ring for 90° Turbo ..
$60.00
Cummins 12 valve and 24 valve lift pump block off plate. Covers the hole on 89-98 12 Valves that would normally have a lift pump bolted into it...
$22.95
LLY 63mm 5 Blade Mafia Drop-in turboBrand new turbocharger. Rated at 660hp. This turbo is an excellent choice for towing, daily driving, or competing ..
$2,261.29
LLY 65mm 5 Blade Mafia Drop-in turboBrand new turbocharger. Rated at 725hp. This turbo is an excellent choice for towing, daily driving, or competing ..
$2,322.00
61/62 Stock+ LML 5 Blade Mafia Drop-in turboBrand new turbocharger. This turbo is an excellent choice for towing, daily driving, or competing in..
$1,921.34
LML 63mm 5 Blade Mafia Drop-in turboBrand new turbocharger. Rated at 660hp. This turbo is an excellent choice for towing, daily driving, or competing ..
$2,224.87
01-04 Duramax LB7 IHI 63/67These are built from new units. NO CORE! If you're looking for some serious stock appearing, bolt in power this is th..
$1,810.05
01-04 Duramax LB7 IHI 67/67These are built from new units. NO CORE! If you're looking for some serious stock appearing, bolt in power this is th..
$2,012.40
This is a drop-in replacement for 2003-2007 5.9
Whether you are looking to replace your old worn-out stock turbo with a simple bolt on up..
$1,209.06
This is a drop-in replacement for 2003-2007 5.9
Whether you are looking to replace your old worn-out stock turbo with a simple bolt on upgrade, sne..
$1,263.69
This is a drop-in replacement for 2003-2007 5.9Whether you are looking to replace your old worn-out stock turbo with a simple bolt on upgrade, sneak p..
$1,466.05
This is a drop-in replacement for 2003-2007 5.9Whether you are looking to replace your old worn-out stock turbo with a simple bolt on upgrade, sneak p..
$1,516.64
This is a drop-in replacement for 2003-2007 5.9
Whether you are looking to replace your old worn-out stock turbo with a simple bolt on up..
$1,718.99
This power package includes our Billet 5Blade Mafia drop in compressor wheel as well as our high flow 10 blade turbine wheel for an overall increase i..
$554.34
6.0 Powerstroke 5 Blade 61/66 Drop-inThe Stainless Diesel '6.0 Stock+ 5blade Mafia™ turbocharger is a drop-in upgrade for your 2003-2007 6.0 Powerstro..
$1,364.87
6.0 Powerstroke 5 Blade 63/66 Drop-inThe Stainless Diesel '6.0 CAPO' 5blade Mafia™ turbocharger is a drop-in upgrade for your 2003-2007 6.0 Powerstrok..
$1,516.64
6.0 Powerstroke 5 Blade 65/67 Drop-inThe Stainless Diesel '6.0 Little Dixie' 5blade Mafia™ turbocharger is a drop-in upgrade for your 2003-2007 6.0 Po..
$1,649.18
This clamp features a welded flap design to prevent leakage at the closing point, it features .030" gauge 304 stainless steel. Includes grade 8 r..
$18.20
With their high torque design, these band clamps offer a tighter seal versus conventional u-clamps and flat band clamps. Premium Stainless Steel Torca..
$119.00
The AP Exhaust H312 is an extra heavy duty 3-1/2" saddle clamp featuring a 3/8" U-Bolt with an 11 Ga. Saddle. Constructed from mild steel.
..
$4.72
V-band assemblies are the most versatile and reliable way to connect your exhaust components. With V-band assemblies, you achieve the flexibility to i..
$55.99
These 304 stainless steel V-band clamps are designed for clamping exhaust components together.Please Note: By popular request, these clamps have been ..
$20.00
The AP Exhaust 9492 4" Chrome Plated Flat Band U-Bolt Clamp is for use on 4" exhaust systems and features a "flat band" instead of a standard u-bolt. ..
$21.73
The AP Exhaust 9503 4" Zinc Plated Flat Band U-Bolt Clamp is for use on 4" exhaust systems and features a "flat band" instead of a standard u-bolt. Th..
$6.13
The AP Exhaust H500Z Extra Heavy Duty 5" Saddle Clamp is a superior quality clamp that is excellent for upgrading or maintaining the exhaust system in..
$7.67
The AP Exhaust 9504 5" Zinc Plated Flat Band U-Bolt Clamp is for use on 5" exhaust systems and features a "flat band" instead of a standard u-bolt. Th..
$7.12
3" extra heavy duty saddle clamp by AP Exhaust is constructed from mild steel and features a 3/8" U-Bolt with an 11 gauge saddle. Part number: H3..
$4.68
If your truck is equipped with a flatbed, utility bed, or if you have a snow plow truck that is subjected to heavy rust and corrosion, this bracket ma..
$71.25
This clamp features a welded flap design to prevent leakage at the closing point, it features .030" gauge 304 stainless steel. Includes grade 8 r..
$17.17
This adapter allows you to convert your 3" outlet to a 4" or 4 3/8" to have a true 4" Exhaust outlet. Or replace your HX40 tu..
$89.99
With their high torque design, these band clamps offer a tighter seal versus conventional u-clamps and flat band clamps. Premium Stainless Steel Torca..
$113.00
Unique heavy duty butt connect band clamp. Only band clamp on the market that will suppport (2) 2.5" butt connected pipes as good as being welded toge..
$30.75