-80x80.jpg)
5” to 3.5” V-band Weld On Turbo Inlet Flange
$49.95
- Part Number: 020115-2
- Est. Ship Time: Usually Ships By Next Business Day
SSL SECURE
TRANSACTION
AUTHENTIC
PRODUCTS
GUARANTEED PREMIUM
QUALITY
A+ Rating
More from this brand
Starting From $1,125.00
Starting From $1,594.95
Starting From $1,684.95
Turbo inlet weld flange. Round 5" billet aluminum weld flange to 3.5" v-band flange. Other sizes on each end may be available just ask.
Compressor ho..
$49.95
Turbo inlet weld flange. Round 5.5" billet aluminum weld flange to 4" v-band flange. Other sizes on each end may be available just ask. Compressor hou..
$49.95
Turbo inlet weld flange. Round 4" billet aluminum weld flange to 3.5" v-band flange. Other sizes on each end may be available just ask.These items gen..
$39.95
Hot
PDP Pick
-10 %
Fleetguard LF16035 Oil Filter
Most filters look the same on the outside. It's what's inside that counts. Cummins Filtration exclusively designed ..
$18.99 $21.10
S400 air outlet v-band flange tapered to 16ga tube. Comes with matching USA made matching clamp. These flanges measure 4.21″ total outside diameter. F..
Starting From $54.90
3.5 ” V-band clamp. Fits most Keating Machine 3.5″ V-band flanges, S400, HT60 & some HX60 turbos when using our matching flanges. 4.21 inch OD, .400 i..
$19.95
Description: Quick Release V-Band Clamp (for V-band Flanges up to 5.75" O.D)Material: T304 Stainless SteelWarranty: One Year Limited Warra..
$39.99
S400, GT42, 3x3
4.62 Turbine outlet flange & clamp
Works with 4" pipes
Mild steel Flange & v-band clamp included
..
$97.34
1998.5-2018 Dodge 24 Valve 5.9L & 6.7L Cummins Extreme duty 750hp and over
7/16", .120" Wall Pushrod
The pushrod is a very importan..
$199.00
-10 %
98.5-2007 5.9L Cummins Diesel Manifold Gaskets, Set of 6
Cummins Part number: 3946275
Picture may not represent actual gasket, it is for illustrativ..
$54.81 $60.90
Dodge Cummins 5.9L/6.7L 12V/24V, 8 pieces Flexplate Bolt Kit
These are for a automatic flexplate will not work for manual flywheel.
ARP: 147-2901
..
$60.81
-10 %
Includes head gasket only. (Thick, dual hole gasket)
Cummins: 3958645..
$245.75 $273.06
Upgrade your fuel system with this fuel filter delete from Fleece Performance Engineering. If you have an aftermarket fuel filtration system such as a..
$79.25
The Industrial Injection dual CP3 is the ultimate for performance. This kit can be purchased with a new, modified, Dueling Dragons (two 85% Dragon Fir..
$1,410.74
Features a larger plenum for increased airflow, and smooth radius turns to reduce turbulence and intake pressure losses. BD’s unique design positions ..
$339.95
For mechanical pressure gauges (except fuel, nitrous, or brake pressure gauges). Includes 6 ft. of 1/8" copper line, 1/8" NPT Male to 1/8" compression..
$15.88
These 304 stainless steel V-band clamps are designed for clamping exhaust components together.Please Note: By popular request, these clamps have been ..
$20.00
Product Unavailable (Updated 11/9/2023)This is a non-returnable part5" V-clamp for HT3B or S400 exhaust outlet. For use with #0406B.
**PLEASE BE ADV..
$0.00
Proven for over a decade on many top level competition pulling trucks and drag trucks who needed to mount p-pumps or Sigma pumps on 2003 and up 5.9L a..
$1,125.00
Used on competition pulling trucks who need to mount p-pumps or Sigma pumps on 2003 and up 5.9L and 6.7L Cummins common rail engine blocks to utilize ..
$1,594.95
Used on competition pulling trucks who need to mount p-pumps or Sigma pumps on 2003 and up 5.9L and 6.7L Cummins common rail engine blocks to utilize ..
$1,684.95
Used on competition pulling trucks who need to mount p-pumps or Sigma pumps on 2003 and up 5.9L and 6.7L Cummins common rail engine blocks to utilize ..
$1,684.95
One piece billet valve cover fits 4BT Cummins 8 valve. Designed for aftermarket injection lines run either over top or around front and back of cover...
$479.95
One piece billet valve cover fits 4BT Cummins 8 valve. Notched to fit over stock injection lines. We also have non-notched valve covers for engines wi..
$479.95
Fits Cummins 4BT 4 Cylinder engine, includes o-ring to seal against block and stainless hardware. This cover doesn’t have a breather port so it is use..
$280.00
Cummins 12 valve and 24 valve lift pump block off plate. Covers the hole on 89-98 12 Valves that would normally have a lift pump bolted into it...
$22.95
Fits 12 Valve Cummins engine with stock gear housing. Requires factory gasket (not included), can use factory fan with stock 12 valve dampener and bel..
Starting From $449.95
One piece billet valve cover fits 1989 to 1993 1st gen 5.9L Cummins 12 valve engines. Notched to fit over stock injection lines. 3.25″ total height wi..
$679.95
One piece billet valve cover fits 1989 to 1993 1st gen 5.9L Cummins 12 valve engines. Notched to fit over stock injection lines.3.25″ total height wil..
$709.95
Fits 12 Valve Cummins engine with stock gear housing. Requires factory gasket (not included), can use factory fan with stock 12 valve dampener and bel..
Starting From $495.00
6 o-rings and 6 copper washers to reseal Keating Machine 12 valve billet valve covers.
Keating: (6) M8 copper washers & (6) -158 o-rings
..
$20.00
Set of 12 titanium retainers with hardened steel locks. Fits 12 Valve Cummins engines with single valve springs that are stock OD for example 60 pound..
$330.00
Fits 12 Valve Cummins engine with stock gear housing. Requires factory gasket (not included), can use factory fan with stock 12 valve dampener and bel..
Starting From $449.95
This clamp features a welded flap design to prevent leakage at the closing point, it features .030" gauge 304 stainless steel. Includes grade 8 r..
$18.20
With their high torque design, these band clamps offer a tighter seal versus conventional u-clamps and flat band clamps. Premium Stainless Steel Torca..
$119.00
The AP Exhaust H312 is an extra heavy duty 3-1/2" saddle clamp featuring a 3/8" U-Bolt with an 11 Ga. Saddle. Constructed from mild steel.
..
$4.72
V-band assemblies are the most versatile and reliable way to connect your exhaust components. With V-band assemblies, you achieve the flexibility to i..
$55.99
These 304 stainless steel V-band clamps are designed for clamping exhaust components together.Please Note: By popular request, these clamps have been ..
$20.00
The AP Exhaust 9492 4" Chrome Plated Flat Band U-Bolt Clamp is for use on 4" exhaust systems and features a "flat band" instead of a standard u-bolt. ..
$21.73
The AP Exhaust 9503 4" Zinc Plated Flat Band U-Bolt Clamp is for use on 4" exhaust systems and features a "flat band" instead of a standard u-bolt. Th..
$6.13
The AP Exhaust H500Z Extra Heavy Duty 5" Saddle Clamp is a superior quality clamp that is excellent for upgrading or maintaining the exhaust system in..
$7.67
The AP Exhaust 9504 5" Zinc Plated Flat Band U-Bolt Clamp is for use on 5" exhaust systems and features a "flat band" instead of a standard u-bolt. Th..
$7.12
3" extra heavy duty saddle clamp by AP Exhaust is constructed from mild steel and features a 3/8" U-Bolt with an 11 gauge saddle. Part number: H3..
$4.68
If your truck is equipped with a flatbed, utility bed, or if you have a snow plow truck that is subjected to heavy rust and corrosion, this bracket ma..
$71.25
This clamp features a welded flap design to prevent leakage at the closing point, it features .030" gauge 304 stainless steel. Includes grade 8 r..
$17.17
This adapter allows you to convert your 3" outlet to a 4" or 4 3/8" to have a true 4" Exhaust outlet. Or replace your HX40 tu..
$89.99
With their high torque design, these band clamps offer a tighter seal versus conventional u-clamps and flat band clamps. Premium Stainless Steel Torca..
$113.00
Unique heavy duty butt connect band clamp. Only band clamp on the market that will suppport (2) 2.5" butt connected pipes as good as being welded toge..
$30.75