Universal Flanges & Clamps

The AP Exhaust H312 is an extra heavy duty 3-1/2" saddle clamp featuring a 3/8" U-Bolt with an 11 Ga. Saddle. Constructed from mild steel.Part Number: H312..

V-band assemblies are the most versatile and reliable way to connect your exhaust components. With V-band assemblies, you achieve the flexibility to install and swap your exhaust parts easily while maintaining the sturdiness and leak-proofing of a welded exhaust.These 304 stainless steel V-band clam..

These 304 stainless steel V-band clamps are designed for clamping exhaust components together.Please Note: By popular request, these clamps have been renumbered. These used to be our 4.0" clamps and were numbered based on outer diameter of the rings they were built to clamp. As of September 29 2008 ..

The AP Exhaust 9492 4" Chrome Plated Flat Band U-Bolt Clamp is for use on 4" exhaust systems and features a "flat band" instead of a standard u-bolt. The durable, chrome plating gives this clamp a nice look and also helps it stand up to the harsh conditions of the road. Features:4" ClampChrome ..

The AP Exhaust 9503 4" Zinc Plated Flat Band U-Bolt Clamp is for use on 4" exhaust systems and features a "flat band" instead of a standard u-bolt. The durable, zinc plated coating helps this clamp stand up to harsh environments.Features:4" ClampFlat Band U-BoltZinc Plated CoatingPart number: 9503..

The AP Exhaust H500Z Extra Heavy Duty 5" Saddle Clamp is a superior quality clamp that is excellent for upgrading or maintaining the exhaust system in your truck or SUV. This exhaust clamp features an 11ga steel base and a steel 3/8” diameter U-bolt that have both been zinc coated for corrosion resi..

The AP Exhaust 9504 5" Zinc Plated Flat Band U-Bolt Clamp is for use on 5" exhaust systems and features a "flat band" instead of a standard u-bolt. The durable, zinc plated coating helps this clamp stand up to harsh environments.Features:5" ClampFlat Band U-BoltZinc Plated CoatingPart number: 9504..

This will butt up to the exhaust outlet v-band flange on H1C & HX35 turbos (maybe some S200s as well), it is  Dimensions: 1.6" long x 2.90OD" x 3.1" Flange OD Genuine OEM Cummins: 3910990...

These 304 Stainless Steel T-Bolt Clamps are perfect for high pressure/high heat intake or exhaust pipe coupling. These clamps are smooth on the inside and will not bite into silicone like worm gear clamps. Clamping ability is over 20 times greater than worm gear clamps. Bolt is easy to tighten sinc..

Diamond Eye part number:  445054IMPORTANT NOTE: Due to varying laws and regulations, most Diamond Eye exhaust systems & components cannot ship to California. Take a look at our product selection for alternatives from other manufacturers if you are in California. If you have any questions about other..

Street Armor 4 Inch Lap Joint Band Clamp. Aluminized or Stainless Steel. Part numbers:SAC400LJ (AL) SAX400LJS (SS)..

PDP Wastegate Block Off Plate and Clamp for Steed Speed Manifold's Perfect to Block a Wastegate Port in Your Steed Speed Manifold. *Please make sure to measure your O.D. on your wastegate port as Steed Speed make a 2.2" and 2.5" wastegate port. Why would you need this?If you change your turbo..

3.5" V-band flange w/ o-ring groove and o-ring, mild steel. Fits S400,HT60 and some other turbos.These items generally ship in 1-2 business days. Please keep this in mind when ordering with express shipping...

Street Armor 5 Inch Lap Joint Band Clamp. Aluminized or Stainless Steel. Part numbers:SAC500LJ (AL) SAX500LJS (SS)..

These 304 Stainless Steel T-Bolt Clamps are perfect for high pressure/high heat intake or exhaust pipe coupling. Unlike some other t-bolt clamps available, these are not marked with any company logo. The only marking is a small, convenient number telling you the clamping ability (in MM). The measur..

Diamond Eye 4" Torca Lap Joint Clamp. Available in aluminized or stainless Diamond Eye part numbers:L40AA (Aluminized) L40SA (Stainless) IMPORTANT NOTE: Due to varying laws and regulations, most Diamond Eye exhaust systems & components cannot ship to California. Take a look at our product sel..

Product Features:  Eliminate "cold flow hose leaks" by automatically adjusting diameter for hose compression set or expansion/ contraction of hose and fittings due to temperature changes. Recommended for bus, truck and heavy-duty equipment air intake and coolant connections. 300 series stainl..

Description:     Stainless Steel T-Bolt Clamps (Pack of 2) Material:     T304 Stainless Steel (including Bolt and Lock Nut)Warranty:     One Year Limited Warranty       Quantity: 2 clamps/pack..

3.5 ” V-band clamp. Fits most Keating Machine 3.5″ V-band flanges, S400, HT60 & some HX60 turbos when using our matching flanges. 4.21 inch OD, .400 inch width of both flanges combined at the top. May not fit other manufacturer’s v-band flanges.These items generally ship in 1-2 business days. Please..

These 304 Stainless Steel T-Bolt Clamps are perfect for high pressure/high heat intake or exhaust pipe coupling. These clamps are smooth on the inside and will not bite into silicone like worm gear clamps. Clamping ability is over 20 times greater than worm gear clamps. Bolt is easy to tighten sinc..

These 304 Stainless Steel T-Bolt Clamps are perfect for high pressure/high heat intake or exhaust pipe coupling. These clamps are smooth on the inside and will not bite into silicone like worm gear clamps. Clamping ability is over 20 times greater than worm gear clamps. Bolt is easy to tighten sinc..

Product Features:  Eliminate "cold flow hose leaks" by automatically adjusting diameter for hose compression set or expansion/ contraction of hose and fittings due to temperature changes. Recommended for bus, truck and heavy-duty equipment air intake and coolant connections. 300 series stainl..

Marmon Flange 4.21 and Clamp Adapter to HX40 for box BW turbo to 4.0" HX40 flange.Adapt exhaust outlet flange from 4.21 Marmon for BW box s300 to HX40 style 4.0". Includes custom clamp.DAP part number: 4.21M-HX40CONV..

3.5" Constant Torque Stainless Steel Intercooler Spring-ClampThese clamps will fit 3.25 or 3.5 OD boots.   JUST ONE CLAMP. ..

Standard Steel U-Bolt Clamp Diamond Eye part number:  444000IMPORTANT NOTE: Due to varying laws and regulations, most Diamond Eye exhaust systems & components cannot ship to California. Take a look at our product selection for alternatives from other manufacturers if you are in California. If you h..

S400,  GT42,  3x34.62 Turbine outlet flange & clampWorks with 4" pipesMild steel Flange & v-band clamp included Stainless Diesel part number: S4F/C - 4.62..

Product Features:  Eliminate "cold flow hose leaks" by automatically adjusting diameter for hose compression set or expansion/ contraction of hose and fittings due to temperature changes. Recommended for bus, truck and heavy-duty equipment air intake and coolant connections. 300 series stainl..

Weld-on Hanger/Clamp, 4 inchSTAINLESS STEELDiamond Eye part number: 455016IMPORTANT NOTE: Due to varying laws and regulations, most Diamond Eye exhaust systems & components cannot ship to California. Take a look at our product selection for alternatives from other manufacturers if you are in Califor..

5" Lap Joint Band Clamp Produced by Flo-Pro..

Diamond Eye Accu Seal 4" Band Clamp (Aluminized) Part number: BC400AIMPORTANT NOTE: Due to varying laws and regulations, most Diamond Eye exhaust systems & components cannot ship to California. Take a look at our product selection for alternatives from other manufacturers if you are in California. ..

Street Armor 3.5 Inch Lap Joint Band Clamp. Aluminized or Stainless Steel. Part numbers:SAC312LJ (AL) SAX312LJS (SS)..

Diamond Eye 5" Torca Lap Joint Clamp. Available in aluminized or stainless Diamond Eye part numbers:L50AA (Aluminized) L50SA (Stainless) IMPORTANT NOTE: Due to varying laws and regulations, most Diamond Eye exhaust systems & components cannot ship to California. Take a look at our product sel..

Steel HE351 to HX40 Flange Adapter Part Number: 35140FL...

Diamond Eye Accu Seal 5" Band Clamp (409 Stainless) Part number: BC500S409IMPORTANT NOTE: Due to varying laws and regulations, most Diamond Eye exhaust systems & components cannot ship to California. Take a look at our product selection for alternatives from other manufacturers if you are in Califo..

Diamond Eye Accu Seal 4" Band Clamp (409 Stainless) Part number: BC400S409IMPORTANT NOTE: Due to varying laws and regulations, most Diamond Eye exhaust systems & components cannot ship to California. Take a look at our product selection for alternatives from other manufacturers if you are in Califo..

Turbo inlet weld flange. Round 4" billet aluminum weld flange to 3.5" v-band flange. Other sizes on each end may be available just ask.These items generally ship in 1-2 business days. Please keep this in mind when ordering with express shipping. Keating part number: 020115-1..

These Stainless Steel T-Bolt Clamps are perfect for high pressure/high heat intake or exhaust pipe coupling. Unlike some other t-bolt clamps available, these are not marked with any company logo. The only marking is a small, convenient number telling you the clamping ability (in MM). The measuremen..

The turbine housing outlet that that this flange fits is a T6 pattern with 5.75" outlet.Image for representation only, may not be actual product...

Description:     Quick Release V-Band Clamp (for V-band Flanges up to 3.19" O.D)Material:     T304 Stainless SteelWarranty:     One Year Limited Warranty       Notes:     - This Quick Release V-Band Clamp is used in our V-Band Flange Assmeblies for 3.19" O.D. tubing Vibrant Performance part number:..

Part number: BC500A Image for reference only.IMPORTANT NOTE: Due to varying laws and regulations, most Diamond Eye exhaust systems & components cannot ship to California. Take a look at our product selection for alternatives from other manufacturers if you are in California. If you have any questio..

The EasySeal offers the best value in wideband exhaust clamps. Used for joining exhaust members of the same diameter. The unique design makes for fast, easy and accurate installation: There is no need to separate pipes or exhaust members before clamping.Materials: Bright Finish 304 Stainless Steel.P..

Zinc Coated U-Bolt Clamp Diamond Eye part number:  454000 (Price is for 1(one) clamp)IMPORTANT NOTE: Due to varying laws and regulations, most Diamond Eye exhaust systems & components cannot ship to California. Take a look at our product selection for alternatives from other manufacturers if you a..

Standard Steel U-Bolt Clamp Diamond Eye part number:  444003IMPORTANT NOTE: Due to varying laws and regulations, most Diamond Eye exhaust systems & components cannot ship to California. Take a look at our product selection for alternatives from other manufacturers if you are in California. If you h..

Image may not be exact part, for representation only..

Description:     Quick Release V-Band Clamp (for V-band Flanges up to 4.13" O.D)Material:     T304 Stainless SteelWarranty:     One Year Limited Warranty       Notes:     - This Quick Release V-Band Clamp is used in our V-Band Flange Assmeblies for 4.13" O.D. tubing Vibrant Performance part number:..

Description:     Quick Release V-Band Clamp (for V-band Flanges up to 4.63" O.D)Material:     T304 Stainless SteelWarranty:     One Year Limited Warranty       Notes:     - This Quick Release V-Band Clamp is used in our V-Band Flange Assmeblies for 4.63" O.D. tubing Vibrant Performance part number:..

Marmon Flange 4.21 and Clamp Adapter 4.40 for box BW turbo to 3rd gen he351 flange.Adapt exhaust outlet flange from 4.21 Marmon for BW box s300 to He351cw style 4.40". Includes custom clamp.DAP part number: 4.21M-HE351CONV..

Turbo inlet weld flange. Round 5.5" billet aluminum weld flange to 4" v-band flange. Other sizes on each end may be available just ask. Compressor housing not included.These items generally ship in 1-2 business days. Please keep this in mind when ordering with express shipping. Keating part number:..