The Edge Products 98203 Back-Up Camera License Plate Mount is specifically designed for use with any of the Edge Products CTS3 monitors or DiabloSport Trinity 2. This back-up camera is automatically engaged when reserve is detected in most vehicles equipped with an automatic transmission. It can als..
The Edge Products 98900 Juice With Attitude Replacement EGT Probe is a replacement for the probe that is included with your Edge Products Juice With Attitude System. FEATURES:For Edge Juice With Attitude Monitor Replacement Probe Part number: 98900..
The Edge Products 98616 EAS Control Kit allows you to monitor EGT's and adds the power switch to control multiple accessories with an on/off digital power switch. The EGT probe is a sensor that allows users to monitor critical Exhaust Gas Temperatures to ensure added power is not creating excessive ..
The Edge Products 98618 EAS Data Logging Kit is the ultimate component kit for maximizing the use of your Edge Insight. This kits gives users the ability to monitor EGTs in two different locations, two 0-100 PSIg boost sensors, and two -40F to 300F temp sensors for unmatched monitoring. This ki..
The Edge Products 98609 EAS Power Switch is an excellent upgrade for anyone that has or is planning to get an Edge Products CTS2 or CT3. This power switch wiring harness gives you the ability to install accessories such as lights or an air compressor and engage them from the CTS2 or CTS3. Due to the..
The FASS HKS-1001 Dual Electric Heater Kit Splitter eliminates the need to re-wire or solder the connections when installing dual electric heaters on your FASS Fuel System. FEATURES:Plug & Play InstallationFor FASS Fuel Systems Eliminates Re-Wiring On Dual Heater KitsApplication N..
The FASS HK-1002 High Output Heater Disk can be added to any FASS Titanium or Titanium Signature Series Fuel System to prevent fuel gelling in cold temperatures. When fuel temperatures drop to below 34° Fahrenheit, a thermostatically controlled switch will automatically power on the 300 Watt Fu..
The FASS 32283R Replacement Heater Element is a direct plug and play replacement heater element for the FASS HK-1001 Electric Heater Kit. FEATURES:For FASS Fuel Systems Replacement Heater Element Application Notes: Heater only, no other parts included. In most cases, this is..
The Fleece FPE-UNV-INTAKE-SENS-5
5" Intake Elbow With MAF Sensor Port makes it easy to fabricate a custom
intake for your modern car, truck, or SUV. This elbow is made in America and is
rotomolded from a tough plastic with provisions for common MAF sensor mounting. FEATURES:5" InletMade In T..
A six-step maintenance system designed to recharge any K&N Filtercharger Air Filter. Restores air flow efficiency so your Filtercharger performs like new! FEATURES:6.5 Oz. Spray Oil12 Oz. Filter CleanerService Decal - #99-5000Part number: 99-5000..
Upgrade the battery in your vehicle with the Odyssey 27-850 Performance Series AGM Battery - ODP-AGM27. The Odyssey Performance System batteries offer a longer service life and increased reliability compared to a conventional battery.Odyssey starts with flat plates that are made out of 99.99% pure l..
The PRO8 is an 8 button electronic programmable switch panel. Allows for easy installation of any 12V accessories to any off-road vehicle, UTV, Jeep, car, truck, RV, or boat. Waterproof, 100% serviceable, and with four easy mounting options. All-in-one Plug N Play kit.All Systems Include:Off-road Un..
When you crank your Dodge Cummins, the Denso Starter draws about 800 amps. This puts a huge toll on all the cable connections, rendering cheap auto parts store replacement clamp-on battery cable ends useless for such a big job.Ours can handle it. With so many dud options out there, we're confident i..
Make upgrading the fuel feed or return in your diesel-powered vehicle a quick and simple installation with the Beans Diesel 280032 Beans Machine Micro Sump. This 6061-billet aluminum sump features an O-ring design for a leak-free installation and eliminates the ¼ tank issues which allows you to get ..
Fleetguard Fuel Head 142784S/filter base/head.Fuel inlet and outlet ports are 7/8-14 UNF-2B, or -10AN ORB
Threaded stud where the filter threads on is 1-14 UNS-2AHead Used With FF104, FF105, FF105C, FF105D, FF213, FS1000, FS1212, FF5320, & other filters.
Allows you to build your own fuel ..
Attributes Overall Height
138.68 mm (5.46 in)Largest OD
93.73 mm (3.69 in)Seam OD
93.78 mm (3.692 in)Gasket OD
71.88 mm (2.83 in)GASKET INSIDE DIAMETER
62.48 mm (2.46 in)Thread Size
NOEFFICIENCY, TWA BY SAE J 1985
The FASS XWS-1002 Extreme Water Separator is designed as a direct fit replacement for the discontinued FASS FF-1003 Filter on your FASS HD Series Fuel Air Separation Systems. This water separator not only removes water from the fuel, but also filters down to 2 Microns. With a service life of 3..
If you're looking for the toughest wheel chock around, you just found it! The TUFF Chock is built 'tuff' and built to last!
When you need a chock for your trailer then look no further than the TUFF Chock from Andersen Hitches.Resists dirt, grease and oil
Extremely strong and sturdy
This water to air intercooler kit is superior to air to air intercooler solutions.
Including a double-wide, ultra high performance water to air intercooler core, a pump, and a radiator (heat exchanger) with dual fans custom designed for water to air intercooler applications, this kit offers extraor..
With the innovative Camper Leveler you can level your RV or trailer on the FIRST try - every single time! No more guesswork! No more hassle! Simply drive up until you are level and then chock - it's that simple. The Andersen Camper Leveler provides 'dead-on' leveling at any increment from 1/2" to 4"..
Back Ordered 4-5 WeeksThe Rapid Jack is your best friend when it comes to fixing a flat tire or removing a wheel on your multi-axle trailer or dually truck. Simply place the small end of the Rapid Jack under the closest good tire and drive up! NOTHING COULD BE EASIER! It can also be used a..
S&B part number: R1305
Oil Color: Blue OilFlange ID (a3): 5"Flange Height (a4): 1"Top Width (a1): 4.5"Pleat Height: .5"Type of Flange: TraditionalElement Height (a5): 12"Base Width (a6): 6.5"Type of Top: Black Urethane (Rubber)Type of Media: Cleanable, 8-Layer Cotton (Blue Oil)
This is also a repl..
Give your vehicle the most advanced digital monitoring system when you install the Edge 84130-3 Insight CTS3 Digital Gauge Monitor. The Edge Insight is the #1 preferred digital monitor on the market and the best multi-gauge touch-screen display available.
This Edge 84130-3 Insight CTS3 Digital Gaug..
Make sure that your tunes stay safe from anyone hooking up to your OBDII port with this protective cover. This is a must have for anyone who is running tuning!
A small price to pay for reducing the risk of having a locked up ECM or someone unknowingly flashing over expensive programming!!
One of the most critical parts of your truck is it's fuel system! Do not just let your FASS or AirDog hang down from your frame and be exposed to road, tire, and field hazards! We have created a completely new mounting system for your FASS or AirDog that compliments an already great fuel system.
Mishimoto has developed an oil catch can to make sure you’re getting the most out of your performance parts.Over time harmful oil will build up inside the turbocharger, intake manifold, intercooler and piping. A Mishimoto Oil Catch Can will prevent this from happening while its all black finish will..
Oil Drain Flange w/ integrated -10AN Fitting (for T3/T4 and GT40-GT55 Turbos)Material: T6061 Billet Aluminum, CNC MachinedWarranty: One Year Limited Warranty- Includes M8 x 1.25 bolts for bolting to turbo
- Does NOT include gasket unless selected above..
The EAS Competition Kit gives users the ability to monitor EGTs and add an additional 0-100 PSIg boost and -40F to 300F temp sensors for ultimate control. This kit is designed for those truck owners who have upgraded turbo or turbo's and other mods ,where the stock sensors just aren't enough anymore..
FASS Fuel Systems Diesel Fuel Bulkhead and Suction Tube Kit (STK-1002)Universal Applications, Ford Powerstroke, GM Duramax and Dodge CumminsThe STK-1002 (Suction Tube Kit), machined from 6061 T-6 Billet Aluminum, is a Bulkhead Fitting comprised of a 5/8" Suction Tube along with a ½" Fuel Return Port..
The perfect upgrade for your EZ Oil Drain Valve. Simply thread this Hose End onto your valve for a hassle-free oil change. The Hose End is designed to accept 3/8" ID hose (Not included, user supplied). This makes it easy to drain into a container to keep spills off your driveway, garage, or shop flo..
Description: Bellmouth Velocity Stack, Aluminum (5" Inlet O.D., 8" Bellmouth O.D.)Material: 1/8" thick T6061 AluminumWarranty: One Year Limited Warranty Notes: Vibrant's new high efficiency Bellmouth-style Velocity Stacks are ideal for All Motor and Forced Induction race applic..
These are the NON-CHARGED FILTER UNITS. We recommend only the non-charged units.
We no longer offer the pre-charged filters and have never recommended using them. Pre-charged filters are designed to maintain SCAs in the coolant by timed release tablets. This does not replace properly checking and..