Tinted 7 Color Series Diesel Gauge Set Boost/Pyrometer/Fuel Pressure

GlowShift's Tinted line of gauges offer read-ability when your diesel is running, but go black or tinted when not being powered. For a clean, private look.

GlowShift's Tinted 7 Color Diesel Gauge Set is a complete set of gauges that is essential for any diesel vehicle towing heavy loads or traveling long distances. GlowShift’s diesel gauge set includes a 60 PSI Boost Gauge, a 1500 or 2400 degree pyrometer gauge, as well as your choice of a 30 PSI Fuel Pressure Gauge that reads from 0 to 30 PSI or a 100 PSI Fuel Pressure Gauge that reads 0 to 100 PSI. This diesel gauge kit boasts some incredible features that includes stepper motor technology, an illuminated red needle, an easy to read magnified tinted lens, as well as 7 color LED through dial lighting. The included stepper motor gives you the perfect combination of extremely accurate gauge readings with incredibly smooth needle movement. GlowShift's 7 Color through dial lighting lets you select from 7 different solid colors, along with 2 color cycle modes, allowing you to match your factory dash lights or add a custom look to the interior of your vehicle. 

GlowShift’s 60 PSI Boost Gauge includes 10 feet of boost hose that is rated for 200PSI and features brass fittings which easily screw into the back of the gauge, as well as the included 1/8th NPT barbed fitting that installs directly to your intake manifold. The included pyrometer gauge reads from either 0 to 1500 or 0 to 2400 degrees Fahrenheit with the included K type thermocouple probe that features 6 feet of steel braided cable and 1/8th NPT threads, allowing you to install the probe directly into your exhaust manifold, and our fuel pressure reads from either 0 to 30 PSI or 0 to 100 PSI with the included 1/8th NPT electronic fuel pressure sensor that can be installed directly to your fuel system. GlowShift stands behind all of its products by including free lifetime technical support and a one-year limited warranty with every diesel gauge set purchase. 

All Gauges Include:

• 2 1/16 Inch (52mm) Black Face Gauge with a Magnified Tinted Lens
• 7 Color LED Through Dial Lighting with Color Recall Ability
• 7 Solid Color Settings and Two Color Cycle Modes
• Dimmer Wire Allows the Gauge to Dim 30%
• Gauge Visor
• Mounting Hardware
• Installation Instructions

60 PSI Boost Gauge

• Gauge Depth Measures 1 1/2 Inches
• Boost Reading from 0 to 60 Pounds of Pressure
• 10 Feet of Boost Hose w/ Brass Fittings
• 1/8th NPT Barbed Fitting

Pyrometer EGT Gauge

• Exhaust Temperature Reading from 0 to 1500 or 0 to 2400 Degrees Fahrenheit
• Type K Thermocouple Probe with 1/8th NPT Male Threads
• Thermocouple Probe Includes 6 Feet of Steel Braided Cable

Fuel Pressure Gauge

• Gauge Depth Measures 1 5/16 Inches
• Fuel Pressure Reading from 0 to 30 or 0 to 100 Pounds of Pressure
• Electronic Fuel Pressure Sensor with 1/8th NPT Male Threads

Note: A Snubber Valve is required when installing a 30 PSI Fuel Pressure Gauge into a 1986-2012 Dodge Ram Cummins. The Snubber Valve regulates, normalizes and eliminates fuel pressure spikes that are present during the initial ignition and startup on the Dodge Cummins Diesel Engine through the use of a regulator. High pressure fuel system spikes during startup are harmful and may cause early and unexpected failure of electronic fuel pressure sensors and/or sending units for fuel pressure gauges.

GlowShift part numbers:

• GS-T7-DS2
• GS-T7-DS20
• GS-T7-DS3