Shop By Category
Your Cart

30 PSI Fuel Pressure 7 Color Tinted Lens Gauge

GlowShift’s Tinted 7 Color Series 30 PSI Fuel Pressure Gauge is the perfect gauge for any diesel truck that is running with lower fuel pressure. This gauge ensures your fuel pressure is running at peak levels, ensuring the pressure is not too low which could result in damage to your fuel pump or injectors and loss of overall horsepower.

This 30 PSI fuel pressure gauge has been updated to include a 1/8th NPT electronic 30 PSI fuel pressure sensor allowing it to be installed directly to your fuel system. This new sensor is twice as small as the previous model and offers extremely accurate readings directly from the source. Featuring an illuminated red needle that sweeps 270 degrees and is powered by stepper motor technology, this gauge offers smooth needle movement and extremely accurate readings. This gauge also features a low profile magnified tinted lens and 7 color through dial LED lighting letting you match your factory dash lights or add a custom look to your interior. GlowShift’s 7 color through dial LED lighting system allows the user to easily cycle through 7 solid color modes, along with 2 color cycle modes, and for easier night driving the LEDs can be dimmed 30% when connected to your factory headlight switch. With the included color memory recall feature you don’t need to worry about adjusting the color of your gauge every time you turn your vehicle. GlowShift stands behind all of its products by including free lifetime technical support and a one year limited warranty with every gauge purchase.

Features:

  • 2 1/16 Inch (52mm) Black Face Gauge with a Magnified Tinted Lens
  • Gauge Depth Measures 1 5/16 Inches
  • Fuel Pressure Reading from 0 to 30PSI
  • 7 Color LED Through Dial Lighting with Color Recall Ability
  • 7 Solid Color Settings and Two Color Cycle Modes
  • Electronic Fuel Pressure Sensor with 1/8th NPT Male Threads
  • Stepper Motor Technology
  • Dimmer Wire Allows the Gauge to Dim 30%
  • Gauge Visor
  • Mounting Hardware
  • Installation Instructions
  • Free Lifetime Technical Support
  • One Year Limited Warranty

Note: A Snubber Valve is required when installing a 30 PSI Fuel Pressure Gauge into a 1986-2012 Dodge Ram Cummins. The Snubber Valve regulates, normalizes and eliminates fuel pressure spikes that are present during the initial ignition and startup on the Dodge Cummins Diesel Engine through the use of a regulator. High pressure fuel system spikes during startup are harmful and may cause early and unexpected failure of electronic fuel pressure sensors and/or sending units for fuel pressure gauges.

GlowShift part number: GS-T711_30

WRITE A REVIEW

 

Please login or register to review

 
Lame California Prop 65 Notice
Tags: Glow , Shift , Fuel , Pressure , 7 , Color , Tinted , Lens , Gauge , GS-T711_30