Gauge Accessories

The Edge Products 98900 Juice With Attitude Replacement EGT Probe is a replacement for the probe that is included with your Edge Products Juice With Attitude System. FEATURES:For Edge Juice With Attitude Monitor Replacement Probe Part number: 98900..

• Easy installation• Easy to view mounting location• Works with Bully Day Watch Dog, Triple Dog & GT Tuner• Works with H&S Performance Black Maxx & Mini Maxx• Clean factory look• Comes painted to match factory color style• Comes with adapter pod for mounting the tuner***If you have a XL ..

Universal Fit Superior Precision and Durability. Easy-to-Read DynaFact Trans Oil Temp Gauge. Measures transmission oil temperature. Suggested for vehicles that see heavy-duty use. Allows proper lubricant warm-up or cool-down to safeguard transmission life. Color-coded face reads at a glance. 1-..

CUMMINS 14MM FUEL PRESSURE GAUGE SNUBBER   * SNUBBER ELIMINATES GAUGE NEEDLE BOUNCE* USE ON ANY FUEL SYSTEM WITH A 14MM X 1.5 THREAD* FASTER INSTALLATION THAN A NEEDLE VALVE  Now, it's easier than ever to install a fuel pressure gauge on your Cummins diesel! If you want to install a fue..

12MM Banjo Bolt Fuel Pressure Gauge Snubber Part number: BBS010  Know the exact fuel pressure of your 98.5-02 Dodge 5.9L 24 Valve Cummins with the VP44 injection pump. * SNUBBER ELIMINATES GAUGE NEEDLE BOUNCE * USE ON ANY FUEL SYSTEM WITH A 12MM X 1.5 THREAD (VP 44) * FASTER INSTALLATION THAN ..

Pushlock billet aluminum construction and made by Glacier Diesel Power in the USA. 1/2" line size and tapped for 1/8" pressure senders. Great way to gain access for fuel pressure reading on your custom fuel system...

Fuel Pressure Snubber, eliminates fuel pressure gauge "vibration". Required for installation of 30 psi Fuel Pressure gauges on Dodge Cummins Diesel Applications in order to protect sending units from excessive pressure spikes during start up. 1/8" NPT Male to 1/8" NPT Female. 1/8" NPT  ..

48RE and 68RFE Transmission Temp Gauge Sender Manifold Easy to install transmission temp sender manifold for all Dodge Rams with 48RE and 68RFE automatic transmissions. 1/2" NPT port allows installation of any gauge sender when used with the proper reducing bushing. After ATF is directed thru the ..

Billet Fuel Filter Cap, Hose, & GaugeGenerally this kit is used as a temporary solution to monitor fuel pressure on a road test, or at idle. Simply mount the gauge temporarily by running the hose and zip-tying the gauge to the windshield. Brand: BostechCondition: New Aluminum BilletLimited ..

Fuel Pressure Test Gauge 0-1000 PSI 94-2007 6.0L/7.3L Powerstroke and T-444e International engines.Complete with 6 foot Stainless Steel Braided Teflon hose and Fuel Bowl adapters for 7.3L and 6.0L 0-100 PSI Liquid Filled Gauge Allows proper diagnostics of the Fuel System output at start-up ..

Xtreme colors that permanently change any interior leather, vinyl or plastic component into a personalized custom expression. The proprietary formula penetrates surface and molecularly bonds to permanently seal in color. Dries to the touch in 45 seconds. Forms a complete molecular bond in 10 minutes..

#4 (6ft), 3/16" ID Fittings For use with mechanical pressure gauges. Recommended for use with fuel pressure gauges. Autometer: 3228..

The Edge EAS Pressure Sensor is a 0 - 100 PSIg 1/8” NPT sensor that plugs directly into the Universal Sensor Input system (p/n 98605). Edge’s Pressure Sensor comes equipped with the proper wires and connectors to plug right into the Universal Sensor Input system saving time and money on cutting, spl..

The XDP Tapped Banjo Bolt has a pre-drilled & tapped 1/8" NPT port to accept a fuel pressure sender or hose. The banjo bolt can be installed in place of your OE banjo bolt on your 98.5-07 injection pump or 94-07 fuel filter canister. Features:12mm with 1/8" NPT Port Simple install for fuel p..

Are you in need of a way to access the pressurized intake air system for use with a Boost gauge? This adapter has a hole drilled through it that allows you to remove one of the bolts that affixes the air intake to the cylinder head. Remove the bolt, replace it with the Boost Adapter, and you now hav..

As the originators of STYLE and performance; we are excited to announce the Universal 2-1/16” Gauge Pillar Adapter for the CS/CTS products. This adapter allows you to mount the CS or CTS products in a 2-1/16” Gauge Pillar Pod. The adapter’s state-of-the-art swivel system, gives you the flexibility t..

The EAS Universal Sensor Input provides the ability to read any 0-5 volt signal and translate that signal a meaningful value for display on the Edge CS or CTS. This means you can add custom temperature, pressure, Air/Fuel and even Travel/Position gauges to your Edge CS and CTS! Using the Edge Access..

Drill & Tap 1/8 NPT for Pyrometer Installation DAP Part Number: DAP-DNT..

Gauge Dimmer SwitchEasy to install, this wiring harness will control battery voltage to your Gauge lights. Redesigned for more flexibility when mounting. You can now mount the dimmer in the dash for easier access. The dimmer is also heavy duty enough to run several gauges or even several pods..

Billet aluminum construction and made by Glacier Diesel Power in the USA. 1/2" line size and tapped for 1/8" pressure senders. Great way to gain access for fuel pressure reading on your custom fuel system...

The XDP Boost Bolt Adapter is designed to take the hassle out of installing a boost gauge on your Cummins. Rather than drilling and tapping factory components; you can install the Boost Bolt Adapter in place of a factory intake plate bolt.   Features:Reversible, no-drill installation 5/8" B..

For mechanical pressure gauges (except fuel, nitrous, or brake pressure gauges). Includes 6 ft. of 1/8" copper line, 1/8" NPT Male to 1/8" compression fitting, 1/8" NPT Female to 1/8" compression fitting, grommet, and 1/8" NPT to 1/4" NPT bushing. Autometer part number: 3224..

Complete Probe kit includes 1/4" dia. Stainless Closed Tip Probe with 10 1/2 ft. wire plus 1/4" compression - 1/8" NPT connector and Heat Shrink for sealing wiring connections. For use with standard Auto Meter Incandescent Lit Pyrometers. Autometer part number: 5249..

This mounting kit allows for mounting all ISSPRO EV2 and PerforMax 2 1/16" gauges with a mounting bracket. Ideally you want your gauges to fit snug in the pod hole for your gauges, but if the hole is too big, or you prefer to have a bracket holding the gauge from the backside, this kit will allow yo..

The EAS Temperature Sensor is a -40°F to 300°F 1/8” NPT supplied with the connectors to plug directly into Edge’s Universal Sensor Input System. Using Edge’s Temperature Sensor you can monitor Transmission Temp., Differential/Axle Oil Temp., Oil Temp., Engine Coolant Temp., Air Intake Temp., Pre and..

Includes 3ft. of #4 braided stainless steel line, firewall pass through grommet, 1/8" NPT female right angle to -4AN male fitting, -4AN male to 1/8" NPT male fitting, -4AN male to 1/8" NPT female fitting, 1/8" NPT to 1/4" NPT adapter bushing. Recommended for use with fuel pressure gauges. For use wi..

Billet aluminum construction and made by Glacier Diesel Power in the USA. 3/8" line size and tapped for 1/8" pressure senders. Great way to gain access for fuel pressure reading on your custom fuel system...

2" 2-Hole Gauge Panel, Black, AluminumAutometer part number: 2237..

Autometer Gauge LED Replacement Bulb Kit - GreenFor all Auto Meter gauges (except clocks, Air/Fuel, & Autogage), speedometers, and most in-dash tachometers. Does not work with Digital & LED Lit gauges (i.e. Cobalt, C2, NV, Phantom II, Sport-Comp II, Ultra-Lite II). Upgrade your stan..

Autometer Product # 2385 1/8" NPT. Includes 3/8" NPT and 1/2" NPT adapter fittings. This sending unit is designed for use with Autogage electric temperature gauges only...

This gauge takes the guesswork out of changing your replacement spin on filter for the DIESELSITE External Transmission Filter Kit. It is clearly marked to let you know when it's time to replace the filter.A normal filter condition will be in the green or yellow area.  Replace the filter when it app..

Are you in need of a way to access the pressurized intake air system for use with a Boost gauge? This adapter has a hole drilled through it that allows you to remove one of the bolts that affixes the air intake to the cylinder head. Remove the bolt, replace it with the Boost Adapter, and you now hav..

Thermocouple Type K 3/16" Diameter Closed Tip For Digital Stepper Motor PyrometerAutometer part number: 5251..

Basic 3-Guage Wire Kit For Autometer Z-Series Ultralites Sportcomp And Phantom Gages. DFuser part number: TMWIREKIT..

2" 1-Hole Gauge Panel, Black, AluminumAutometer part number: 2236..

5 Business Days to Ship!For interior mounting of any Auto Meter mechanical pressure gauge. This isolator is rated at 200 PSI working pressure with a maximum of 300 PSI peak. Comes with 4' of braided hose.Compatible with gasoline, diesel, oil, and antifreeze, Cannot be used with alcohol or nitro-meth..

Product # : 2260 1/8" NPT Female fitting weld boss. For installing pyrometer probes, electric transmission and oil temperature gauge senders on applications that do not allow for drill and tap method...

2" 3-Hole Gauge Panel, Black, AluminumAutometer part number: 2238..

This compact separate module is designed to allow for isolated dimming for all Auto Meter gauges utilizing LED lighting technology separate from your vehicle's OEM dash. Autometer: 9114..

Features0-100 PSI Range Accuracy: 2.5% FS Large 2.25” dial face for easy viewing Sure grip rubber shock isolation boot 13.75“ Stainless braided line Angled chuck enables easy measuring Mechanical pressure release valve Rugged carrying case100 PSI gauge with Auto Meter's signature raci..

1/8" NPT. Replacement for Full Sweep Electric Temperature gauges. Will not work with discontinued Full Sweep Electric Temperature gauges that include black box interface module. Owners of this product should use #2250 instead...

The PPE Diesel Fuel Rail Pressure Gauge Harness 513010100 make installing a PPE Fuel Rail Pressure Gauge into your 2001-2010 GM Duramax LB7/LLY/LBZ/LMM or 2003-2017 Dodge 5.9L/6.7L Cummins a plug and play installation. This harness eliminates the need to cut, splice or modify the stock harness when ..

Universal triple 2-1/16" dash pod. Gauges not included.Autometer part number: 5288..

GlowShift’s Transmission Test Port Extender is specifically designed for the 94-07.5 Dodge Ram. GlowShift’s Transmission Test Port Extender is required when installing any of our transmission temperature gauges into your 1994–2007.5 Dodge Truck. If this extender is not installed, internal transmissi..

2-5/8" Mounting Cup, TEMP Gauge, BlackBracket IncludedAutometer part number: 3204..

Extend the life of your exhaust pressure gauge/sending unit with this handy particle trap kit. Easily servicable, this unit is designed to take all the abuse your hard working truck can put out. Feature PointsThis particle trap assembly is designed specifically to collect exhaust contaminants be..

The Edge Accessory System (EAS) was created with future expandability in mind. The architecture of the EAS allows users to connect multiple accessories, daisy-chain style, to the CS and CTS platform. The ability to daisy-chain multiple accessories using the EAS allows users to monitor and display do..