-80x80.jpg)
Brand: Keating Machine
Part Number: (3)010611-1V2 / 122910-1P / 122910-5
Fits 1989 to 2002 Cummins 5.9L engine blocks. Kit includes 3 billet side freeze plugs, 1 rear freeze plug featuring 1/2″ npt port supplied with brass block off plug, and 1 front freeze plug. See pictures and choose between the street version of the front freeze plug that is held in by and works with..
$193.35
Brand: Keating Machine
Part Number: 122910-1P
Fits 1989 to 2002 12 & 24 Valve 5.9L Cummins engine block. Billet rear freeze plug features 1/2″ npt threaded center hole with plug (can be removed to accommodate coolant bypass). Stainless bolts, o-ring and hardware to mount and seal plug is included. Helps prevent blow out at high rpm’s,..
$52.50
Brand: Keating Machine
Part Number: 010611-1v2
Fits 1989 to 2002 5.9L Cummins engine block. Billet side freeze plug features recess for bolt head, includes o-ring freeze plug seal and copper sealing washer with Stainless Steel cap head Allen bolt.Keating Machine Part Number: 010611-1v2..
$34.95
Brand: Keating Machine
Part Number: 110913-3.5
T4 exhaust transition flange to 3.5″ OD 16ga tube 3D machined round to rectangle. Mild steel. Commonly used in compound turbo set ups.CNC machined in Clinton, TN.Part Number: 110913-3.5..
$69.95
Brand: Keating Machine
Part Number: 020415-1
Cummins 12 valve and 24 valve lift pump block off plate. Covers the hole on 89-98 12 Valves that would normally have a lift pump bolted into it. Allows you to eliminate the lift pump bracket on 98.5-02 24 Valve Cummins trucks.03-18 trucks, this blocks off the ccv breather drainback port.
O-ring ..
$22.95
Brand: Keating Machine
Part Number: 120510-2
Fits 1989 to 2002 12 Valve and 24 Valve 5.9L Cummins engines. Billet side cover includes o-ring to seal against block and stainless hardware.
Starts out as 3/4" thick material then fully CNC machined in house. Will not fit common rail. Now comes with baffling built in. Breather ports use -12AN male..
$293.50
Brand: Keating Machine
Part Number: KEA062413-x
Fits Cummins 24 valve common rail HE351CW turbo exhaust outlet flange.Mild steel flange CNC made by Keating Machine.
Available in 3, 3.5, or 4 inch. 4 inch representation is the last image above (number 3)...
$39.00
Brand: Keating Machine
Part Number: 012510-3
Fits 12 Valve Cummins engine with stock gear housing. Requires factory gasket (not included), can use factory fan with stock 12 valve dampener and belt. Includes Stainless Steel hardware. Allows installation of aftermarket mechanical fuel supply pump. Includes crank seal adapter ring (does not..
$419.95
Brand: Keating Machine
Part Number: 122910-5
Fits:
All B series Cummins 12V, 24V, and 4BT 5.9L and 6.7L common rail engine blocks.
Billet front freeze plug features o-ring seal. Will work when using the stock fan. Held in by the stock fan pulley mount...
$36.00
Brand: Keating Machine
Part Number: 12VONEPCVC
Keating Machine one-piece billet valve cover for 5.9L Cummins 12V.Also acts as a girdle for the rocker pedestals to help stabilize them when using high spring pressures and rpm. Comes with Keating logo engraved on top. Sealed with o-ring to head. Add $50.00 for machining to use stock injection lines..
$732.25
Brand: Keating Machine
Part Number: 11911-1
Fits 1994 to 1998.5 12 Valve Cummins engine with stock gear housing featuring custom design to add contrast to the front of your gear housing. Billet gear housing cover requires factory gasket (not included), designed to use factory fan with stock dampener and belt without modification.
Includes St..
$495.00
Brand: Keating Machine
Part Number: 041511-3.5S
3.5" V-band flange w/ o-ring groove and o-ring, mild steel. Fits S400,HT60 and some other turbos.These items generally ship in 1-2 business days. Please keep this in mind when ordering with express shipping...
$34.95
Brand: Keating Machine
Part Number: KEA010410-5
Fit T6 exhaust inlet flange. Flange is 3D profliled, CNC machined in-house to maximize air flow. Available for 3", 3.5" round ID schedule 40 sizes. Weldable mild steel.Fits most HC5A,HX80,HX82,HX83,S400,& T18A turbochargers. 4" flange is available for $85.00 also, it is pictured as as separate i..
$95.00
Brand: Keating Machine
Part Number: 062413-1
Fits Cummins 4BT 4 Cylinder engine, includes o-ring to seal against the block and stainless hardware. Breather hole can be added. This fits most of the roller lifters being used, but if you are using roller lifters be sure to check the clearance between them and this cover before installation.These ..
$225.00
Brand: Keating Machine
Part Number: 122314-5
Fits 1994 to 1998.5 12 Valve Cummins engine with stock gear housing featuring custom design to add contrast to the front of your gear housing. Billet gear housing cover requires factory gasket (not included), designed to use factory fan with stock dampener and belt without modification.
Includes St..
$439.95
Brand: Keating Machine
Part Number: KEA010410-4
3.5 ” V-band clamp. Fits most Keating Machine 3.5″ V-band flanges, S400, HT60 & some HX60 turbos when using our matching flanges. 4.21 inch OD, .400 inch width of both flanges combined at the top. May not fit other manufacturer’s v-band flanges.These items generally ship in 1-2 business days. Please..
$26.00
Brand: Keating Machine
Part Number: 012313-2
Torque plate used to simulate stress put on the block normally by the cylinder head and bolts while honing the block for piston rings.
Fits Cummins 6 cylinder B-series engines.
Will clear .40 over bore 6.7L block
Made to use stock short 12v Cummins head bolts
Plate is 1 13/16" thick
Made of s..
$875.00
Brand: Keating Machine
Part Number: 120610-3
Fits mid-1998 to 2002 24 Valve engine. Billet Valve cover machined in-house, includes o-ring sealed oil fill cap. Taller than factory valve cover for extra clearance of custom valvetrain parts. Starts as 78 pound block of aluminum, that is approximately 10 pounds finished. Requires stock valve cover..
$849.95
Brand: Keating Machine
Part Number: 062413-5V2
Fits Cummins 6BT, 1989 to 2002 Dodge trucks and many other industrial applications with similar pump mounting. Has mounting for fuel filter built in so the filter is located under and close to injection pump. It's how we mounted the filter on my old 8 second 1/4 mile drag truck. Aftermarket filter h..
$45.00
Brand: Keating Machine
Part Number: 020115-1
Turbo inlet weld flange. Round 4" billet aluminum weld flange to 3.5" v-band flange. Other sizes on each end may be available just ask.These items generally ship in 1-2 business days. Please keep this in mind when ordering with express shipping.
Keating part number: 020115-1..
$39.95
Brand: Keating Machine
Part Number: 122513-6
Currently being redesigned No ETA of release date at this timeUpdated 8/3/202212V intake flange to 2.0" round 3 d machined to port shape. Made from mild steel. Also available in aluminum. These are used to build individual runner intake manifolds. Comes with aluminum block to add extra bolt hol..
$0.00
Brand: Keating Machine
Part Number: 032513-4
Cummins oil filter adapter block off with -12AN inlet port.Oil filter adapter block off with single -12AN inlet port fits most Cummins 12v engines. Designed for use when using a dry sump oil system or external pump wet sump system. Will not work with the stock oil pump. Stock oil pump must be blocke..
$0.00
Brand: Keating Machine
Part Number: 122314-7
Turbo inlet weld flange. Round 5.5" billet aluminum weld flange to 4" v-band flange. Other sizes on each end may be available just ask. Compressor housing not included.These items generally ship in 1-2 business days. Please keep this in mind when ordering with express shipping.
Keating part number:..
$49.95
Brand: Keating Machine
Part Number: 020115-2
Turbo inlet weld flange. Round 5" billet aluminum weld flange to 3.5" v-band flange. Other sizes on each end may be available just ask.
Compressor housing not included.These items generally ship in 1-2 business days. Please keep this in mind when ordering with express shipping.
Keating part number..
$49.95
Brand: Keating Machine
Part Number: 122513-2
Billet 3-way bypass valve with -8 fittings.The ball valve will support the flow capacity of an AN-10 fitting.Keating Machine part number: 122513-2..
$159.95
Brand: Keating Machine
Part Number: 110913-8
Cummins billet front timing cover for p-pump and Sigma pump converted engines. Allows pump gear to be removed with out removing front cover. Usually used with engines running Sigma pumps and or being dyno tested on a regular basis.
Requires belt and pulley modifications. 1/2" thick aluminum.These i..
$529.95
Brand: Keating Machine
Part Number: 122513-3
Fuel pump drive hub to drive Waterman or similar pump off the aux / power steering pump gear.In order to recognize which hub to use you must determine if the gear has a "STEP" or "NO STEP"
"NO STEP GEAR": This gear can be drilled and tapped to accept this particular drive hub. It requires removal..
$39.95
Brand: Keating Machine
Part Number: 010410-8
DiscontinuedBolts to HT3B (HT3B TURBO, NOT T3 FLANGE) exhaust flange and converts to 3" round outlet. Weldable mild steel, fits 3 inch round ID schedule 40.These items generally ship in 1-2 business days. Please keep this in mind when ordering with express shipping.
Keating part number: 010410-8..
$0.00
Showing 1 to 28 of 28 (1 Pages)