Shop By Category
Your Cart

Products From Thermal Zero

A large amount of what we make is production blanketing.  We manufacture universal turbo blankets to fit on a large variety of turbochargers or blanketing for specific OEM and aftermarket applications.  We pride ourselves in how well we can create beautiful fitting and performing blankets from raw materials.  Our blanketing is all designed and handmade at our factory here in Cincinnati, Ohio.
Brand: Thermal Zero Part Number: TZ0410LBM-L
Specifically designed to fit the 2004.5 to 2010 Duramax LLY LBZ and LMM VGT Turbochargers. The blanket covers the entire exhaust housing precisely covering all the important areas to reduce heat in the engine bay directly from the turbo by up to 80% and to surrounding components. (Far better than th..
$199.00
Brand: Thermal Zero Part Number: TZ32047-L
Universal Externally Wastegated T3 Lava Turbo Blanket.  Fits most all T3 turbo exhaust housings and some T4.   Thermal Zero turbo blankets go above and beyond when it comes to heat tolerance and durability.  The inner layer of the turbo blanket can handle over 2500 degrees Fahrenheit of direct hea..
$145.00
Brand: Thermal Zero Part Number: TZ32258-L
Universal Externally Wastegated T4 Lava Turbo Blanket.  Fits most all T4 turbo exhaust housings and some T5/T6.   Thermal Zero turbo blankets go above and beyond when it comes to heat tolerance and durability.  The inner layer of the turbo blanket can handle over 2500 degrees Fahrenheit of direct ..
$165.00
Brand: Thermal Zero Part Number: TZ332611-x
Universal T6 turbo blanket.  Fits most all T6 turbo exhaust housings including most all Marine applications and Detroit Diesel turbochargers.  For most Borg Warner T6 S400 series please see part number TZ328511.   Thermal Zero turbo blankets go above and beyond when it comes to heat tolerance and ..
$130.00
Brand: Thermal Zero Part Number: TZ332611-L
Universal Externally Wastegated T6 Lava Turbo Blanket.  Fits most all T6 turbo exhaust housings including most all Marine applications of Detroit Diesel turbochargers.  For Borg Warner T6 S400 series housings please see part number TZ328511-L. Thermal Zero turbo blankets go above and beyond when it..
$250.00
Brand: Thermal Zero Part Number: TZ32047-x
Universal External Wastegated T3 Turbo Blanket.  Fits most all T3 turbo exhaust housings and some T4.   Thermal Zero turbo blankets go above and beyond when it comes to heat tolerance and durability.  The inner layer of the turbo blanket can handle over 2500 degrees Fahrenheit of direct heat.  The..
$95.00
Brand: Thermal Zero Part Number: TZ32258-x
Fits most all T4 externally wastegated turbine housings   Thermal Zero turbo blankets go above and beyond when it comes to heat tolerance and durability.  The inner layer of the turbo blanket can handle over 2500 degrees Fahrenheit of direct heat.  The blankets are made with high quality 1 inch th..
$105.00
Brand: Thermal Zero Part Number: MB0309CD-B
The 03-09 Dodge Cummins 5.9L 6.7L Diesel manifold blanket was designed to solve multiple heat and noise issues which are a result of the manifold and turbo placement in the engine bay.   The manifold on a Dodge Cummins 5.9L gets extremely hot and a metal heat shield just doesn’t cut it and wrappin..
$140.00
Brand: Thermal Zero Part Number: MB0309CD-L
The 03-09 Dodge Cummins 5.9L Diesel manifold blanket was designed to solve multiple heat and noise issues which are a result of the manifold and turbo placement in the engine bay.   The manifold on a Dodge Cummins 5.9L gets extremely hot and a metal heat shield just doesn’t cut it and wrapping it ..
$199.00
Brand: Thermal Zero Part Number: MB8998CD-B
The Thermal Zero 89-98 Dodge Cummins 5.9L Diesel manifold blanket was designed to solve multiple heat and noise issues which are a result of the manifold and turbo placement in the engine bay.   As I am sure you are already aware, the manifold on a Dodge Cummins 5.9L gets extremely hot and a metal..
$140.00
Brand: Thermal Zero Part Number: MB8998CD-L
The 1989 – 1998 Dodge Cummins 5.9L Diesel manifold blanket was designed to solve multiple heat and noise issues which are a result of the manifold and turbo placement in the engine bay.   The manifold on a Dodge Cummins 5.9L gets extremely hot and a metal heat shield just doesn’t cut it and wrappi..
$199.00
Brand: Thermal Zero Part Number: MB9902CD-L
The 98-02 Dodge Cummins 5.9L Diesel manifold blanket was designed to solve multiple heat and noise issues which are a result of the manifold and turbo placement in the engine bay.   The manifold on a Dodge Cummins 5.9L gets extremely hot and a metal heat shield just doesn’t cut it and wrapping it ..
$199.00
Brand: Thermal Zero Part Number: TZHE351CW-L
Specifically designed to fit the HE351CW turbocharger found on OEM 04.5-09 DODGE RAM trucks with the 5.9L 24V.  The blanket efficiently covers the turbine housing while giving the wastegate arm assembly full range of motion. This blanket is designed to fit the OEM and similar aftermarket HE351CW tur..
$150.00
Brand: Thermal Zero Part Number: LV1xxxxxx
Lava high temperature heat wrap is designed and engineered to withstand the highest of temperatures. Lava wrap is manufactured from actual pulverized lava rock which is stranded into a fiber then woven into a highly durable and extremely heat resistant wrap.  Lava wrap is stronger and more reliable ..
$30.00
Brand: Thermal Zero Part Number: BL1xxxxx
choose from 25′, 50′ or 100′ lengths Handles 1000 – 1500°F direct heat Very flexible for easy install on a large variety of applications Vermiculite coated high temperature fiberglass wrap It is extremely flexible and the weave of this wrap is very tight.  This high temperature vermiculite c..
$17.00
Brand: Thermal Zero Part Number: TZBWL5P-L
Designed to precisely fit the contour of the Borg Warner L5P General Motors Duramax Diesel turbine housing while maintaining the ability to use the original heat shield mounting points.  Use of the OEM heat shield is not necessary with this blanket though.   The heavy duty construction of this bla..
$199.00
Brand: Thermal Zero Part Number: TZHE351CW-B
Specifically designed to fit the HE351CW turbocharger found on OEM 04.5-09 DODGE RAM trucks with the 5.9L 24V.  The blanket efficiently covers the turbine housing while giving the wastegate arm assembly full range of motion. This blanket is designed to fit the OEM and similar aftermarket HE351CW tur..
$100.00
Brand: Thermal Zero Part Number: LAHSxxxxx
Our lava insulation sheathing picks up where our regular aluminized sheathing left off in terms of heat protection and insulation qualities.  The lava sheathing is capable of handling extreme  heat because of its woven pulverized lava rock composition.  The sheathing itself can easily handle 3000°F ..
$18.00
Brand: Thermal Zero Part Number: AL3636
This aluminized vermiculite coated fiberglass mat is extremely thick and capable of insulating any surface or area from extreme radiant heat. It can easily be cut into shapes and secured into position with screws, rivets or apply adhesive and stick into place. Aluminized surface capable of reflect..
$75.00
Brand: Thermal Zero Part Number: TZ328511-B
Considering some the Borg Warner S400 series housings are a very odd size (too small to fit a T6 blanket and too big to fit the T4 blanket) we designed a blanket just for the majority of the big boy S400 turbine housings.  This blanket is specifically created to fit the larger T6 S400 and S480 housi..
$130.00
Brand: Thermal Zero Part Number: TZBWS3GX-L
This blanket fits a multitude of Cummins upgraded turbo housings but was specifically designed to fit the Borg Warner S300GX turbocharger housing that is commonly used on 1994-2004 Dodge Cummins 5.9L diesel.   The blanket completely covers around the entire turbo exhaust housing covering all the imp..
$199.00
Brand: Thermal Zero Part Number: MPK12
The Thermal Zero Power Pack muffler packing kit contains a 2 square foot (1/2″ x 12″ x 24″) section of 6 pound density ceramic material.  This kit contains enough material to typically repack two motorcycle mufflers or one automotive muffler. Our ceramic muffler packing kits are far more dense than..
$20.00
Brand: Thermal Zero Part Number: SSxxxxxP
Perfect for securing Thermal Zero exhaust wrap and blanketing material to exhaust pipe or heat sources. For use where a high strength tie is needed. The positive locking system was designed to hold materials tights in extreme environments. Thermal Zero Locking Stainless Steel Ties work a bit diffe..
$12.00
Brand: Thermal Zero Part Number: TZ328511-L
Considering some the Borg Warner S400 series housings are a very odd size (too small to fit a T6 blanket and too big to fit the T4 blanket) we designed a blanket just for the majority of the big boy S400 turbine housings.  This blanket is specifically created to fit the larger T6 S400 and S480 housi..
$199.00
Brand: Thermal Zero Part Number: ST14
The Stainless Steel Zip Ties we offer are a ball locking steel tie design.  We carry these in 14″ and 23″ lengths and 5/16 width.  When tightened all the way down they will secure to 1/2 inch diameter. Stainless Steel Zip Ties are a very versatile non-reusable, commonly used where a regular plastic ..
$14.00
Brand: Thermal Zero Part Number: MB9902CD-x
The 98-02 Dodge Cummins 5.9L Diesel manifold blanket was designed to solve multiple heat and noise issues which are a result of the manifold and turbo placement in the engine bay.   The manifold on a Dodge Cummins 5.9L gets extremely hot and a metal heat shield just doesn’t cut it and wrapping it ..
$140.00
Brand: Thermal Zero Part Number: TZHX35W-B
Specifically designed to fit the HX35W turbocharger found on OEM 96-98 DODGE RAM trucks with the 6BT 5.9 MANUAL 12V.  The blanket efficiently covers the turbine housing while giving the wastegate arm assembly full range of motion.   This blanket is designed to fit the OEM and similar aftermarket H..
$120.00
Brand: Thermal Zero Part Number: TZ45PB4-L
This elbow pipe blanket was originally designed to fit on the  HE351CW and Hy35W turbocharger downpipe elbow that is found on OEM 04.5-09 DODGE RAM trucks with the 5.9L 24V.  The blanket efficiently covers the necessary bits of downpipe elbow while also staying close to the housing. We found however..
$120.00
Brand: Thermal Zero Part Number: AHSxxxxx
Thermal Zero protective aluminized heat insulation sheathing can be used for a large variety of purposes.  Fuel lines, electrical wiring, oil lines and spark plug cables are just a few common uses. The sheathing is made from vermiculite coated fiberglass mat with a bonded aluminum layer to reflect ..
$12.00
Brand: Thermal Zero Part Number: TZHX35W-L
Specifically designed to fit the HX35W turbocharger found on OEM 96-98 DODGE RAM trucks with the 6BT 5.9 MANUAL 12V.  The blanket efficiently covers the turbine housing while giving the wastegate arm assembly full range of motion.   This blanket is designed to fit the OEM and similar aftermarket H..
$180.00
Brand: Thermal Zero Part Number: TZ341713-G
The Thermal Zero Heavy Duty Industrial and Marine T6 turbo blanket shares nearly the same internal dimensions as the normal T6 turbo blanket (TZ332611) but has twice the insulating capabilities.  This blanket is modeled after the factory installed Detroit Diesel turbo blanket.  It is designed to wit..
$299.00
Brand: Thermal Zero Part Number: WT1xxxxxx
choose from 25′, 50′ or 100′ lengths Handles 1000 – 1500°F direct heat Very flexible for easy install on a large variety of applications Vermiculite coated high temperature fiberglass wrap    It is extremely flexible and the weave of this wrap is very tight.  This high temperature vermiculite c..
$14.00
Brand: Thermal Zero Part Number: USHB
The Universal Stater Heat blanket kit is an extremely inexpensive solution to a common problem that a multitude of both OEM and aftermarket system are plagued with.  Overheating and eventual death of the starter because of the close proximity of the exhaust to the starter.  Often times a starter tha..
$20.00
Brand: Thermal Zero Part Number: TZ45PB4-B
This elbow pipe blanket was originally designed to fit on the  HE351CW and Hy35W turbocharger downpipe elbow that is found on OEM 04.5-09 DODGE RAM trucks with the 5.9L 24V.  The blanket efficiently covers the necessary bits of downpipe elbow while also staying close to the housing.   We found how..
$70.00
Brand: Thermal Zero Part Number: TZWELDTIP-T
Tig welding long passes in or confined areas can be difficult, especially when you don’t have proper protection.   The Welders finger tip cover adds an extra layer of protection between your hand and the extremely hot piece you are welding.  The cover simply slips over your gloved hand that holds ..
$10.00
Brand: Thermal Zero Part Number: TZBLAK
Quickly and easily add secure wire attachment points to any place on a blanket you feel necessary.   The lacing anchor pierces the blanket and secures on the back side with a washer.  No special tools required    Kit includes 5 lacing anchor assemblies (5 pins and 5 washers)..
$10.00
Brand: Thermal Zero Part Number: MPK1
The Thermal Zero Power Pack muffler packing kit contains a 2 square foot (1″ x 12″ x 24″) section of 4 pound density ceramic material.  This kit contains enough material to typically repack two motorcycle mufflers or one automotive muffler. Our ceramic muffler packing kits are far more dense than n..
$25.00
Brand: Thermal Zero Part Number: SSxxxxxBP
Perfect for securing wrap and blanketing material to exhaust pipe or heat sources.   Thermal Zero Locking Stainless Steel Ties work a bit different than our normal stainless steel zip ties. Locking Stainless Steel Ties are notched much like a plastic zip tie which allows the tie to lock into place..
$16.00
Brand: Thermal Zero Part Number: AL116225
Reflective aluminized insulation tape or wrap is best used on surfaces you wish to keep cold.  Although it can handle 500°F direct heat it is not intended to touch extreme heat sources.  Instead the purpose of this wrap is to keep a pipe that is close to a heat source cool and insulate..
$24.00
Brand: Thermal Zero Part Number: TZBLW
Need more wire?  Here is about 36″ of more wire to hopefully fulfill all of you heat blanket wiring needs.    We can’t just send wire though…  So to make it worth while we will send a sticker too...
$3.00
Brand: Thermal Zero Part Number: TN1xxxxxx
choose from 25′, 50′ or 100′ lengths Handles 1000 – 1500°F direct heat Very flexible for easy install on a large variety of applications Vermiculite coated high temperature fiberglass wrap   It is extremely flexible and the weave of this wrap is very tight.  This high temperature vermiculite co..
$15.00
Brand: Thermal Zero Part Number: TZBWS3GX-B
This blanket fits a multitude of Cummins upgraded turbo housings but was specifically designed to fit the Borg Warner S300GX turbocharger housing that is commonly used on 1994-2004 Dodge Cummins 5.9L diesel.   The blanket completely covers around the entire turbo exhaust housing covering all the imp..
$120.00
Showing 1 to 42 of 42 (1 Pages)