DISCONTINUED!SFI Approved Spec 2.1 CertifiedStreet Driving, Heavy Towing, & Sled PullingUp to 4000RPMs (4000+ requires Comp Puller)Clutch comes set up and assembled with everything you'll need for installationBillet Steel Flywheel with Bronze Inlay(2) Sintered Iron Discs with 16 Rivets & Ha..
Call to Confirm Availability! Possible Lead Time!Fits 1994 - 2005 NV4500 - NV5600
HP Rating: 900
12 IN. 5135 Sinterned iron disc, these last longer for extreme sled pulling & shift better due to flatness under heat
3400LBS diaphragm pressure plate
Throwout Bearing
1998.5-2005 models requir..
2011+ Duramax | 2017.5+ Ford | Bolt on Traction bar kit | Professional Grade Rod Ends | Long Bed | 201038-86Nearly every Duramax has a wheel hop issue right off of the factory floor. Even under stock power levels this wheel hopping can cause extremely costly repairs, including broken driveshaf..
2011+ Duramax | 2017+ Ford | Bolt on Duramax traction bar kit | Professional Grade Rod Ends | Short Bed | 201038-72Nearly every diesel has a wheel hop issue right off of the factory floor. Even under stock power levels this wheel hopping can cause extremely costly repairs, including broken dri..
Replace your cracked or damaged OE flex plate with this heavy duty option from DHD. These units are nearly twice as thick as OE and are engineered to handle up to 1500lb-ft or torque. DHD's heavy duty flex plates are a must for customers with aftermarket torque converters and built transmissions! A ..
2011-2017 | Ford | Bolt on Long Bed Traction Bar Kit | Professional Grade Rod Ends | 86" center hole to center hole | 201049-86Nearly every Duramax has a wheel hop issue right off of the factory floor. Even under stock power levels this wheel hopping can cause extremely costly repairs, including bro..
2011+ | Ford | Bolt on Short Bed Traction Bar Kit | Professional Grade Rod Ends | 72" center hole to center hole | 201049-72Nearly every Duramax has a wheel hop issue right off of the factory floor. Even under stock power levels this wheel hopping can cause extremely costly repairs, including broken..
2011-2017 | Ford | Bolt on traction bar kit | Standard Grade Rod Ends | 86" center hole to center hole | 201047-86Nearly every Ford has a wheel hop issue right off of the factory floor. Even under stock power levels this wheel hopping can cause extremely costly repairs, including broken drives..
2011-2017 | Ford | Bolt on traction bar kit | Standard Grade Rod Ends | 72" center hole to center hole | 201047-72Nearly every Ford has a wheel hop issue right off of the factory floor. Even under stock power levels this wheel hopping can cause extremely costly repairs, including broken drives..
Smooth operation
Performs open until needed
Fully automatic limited slip
True Trac limited slip for Chrysler 9.25" front with 33 spline axles. The True Trac limited slip uses a worm-gear design to bias torque from one tire to the other, providing extremely smooth operation. Since there are no c..
Backordered with No ETA **Updated 02/15/2024**
Now Flowmaster, formerly Hushpower mufflers.
PRO MUFFLER
4.00"IN/4.00"OUT, 8"D X 20"L CASE,
Stainless Steel
Hushpower Pro Series mufflers provide groundbreaking sound control, while delivering maximum power ..
Smooth operationPerforms open until neededFully automatic limited slipTrue Trac limited slip for Dana Spicer 60 front with 35 spline axles, 4.10 & DownThe Detroit Truetrac was the first helical gear differential ever introduced into the automotive aftermarket as an Eaton brand. It remains the leadin..
Heavy duty 1 piece right front axle replaces the factor 2 piece factor CAD setup (central axle disconnect) & deletes the shift actuator/motor.This is the same kit that Haisley Machine offers. IncludesRight & left 35 spline heavy duty axle shaftsSeal kit and shift actuator/motor delete plateAvailable..
Smooth operation
Performs open until needed
Fully automatic limited slip
True Trac limited slip for Dana Spicer 60 rear with 35 spline axles, 4.56 & up
The Detroit Truetrac was the first helical gear differential ever introduced into the automotive aftermarket as an Eaton brand. It remains the..
Smooth operation
Performs open until needed
Fully automatic limited slip
True Trac limited slip for Dana Spicer 60 front with 30 spline axles, 4.56 & up
The Detroit Truetrac was the first helical gear differential ever introduced into the automotive aftermarket as an Eaton brand. It remains th..
DHD's Billet Chromoly 38 Spline Spool is the marketplace leader for strength, features and innovation. For 9 years our spools have been the trusted choice of countless Pro Street, Pro Stock, 2.5, 2.6, 3.0 pullers and drag racers with AAM 11.5 axles. Each spool is crafted from solid 4340 material and..
Longhorn Fab Shop 2" Duramax Traction Bars (2" Diameter 2001-2010) (Pair)
Nearly every Duramax has a wheel hop issue right off of the factory floor. Even under stock power levels this wheel hopping can cause extremely costly repairs, including broken driveshafts, broken axle pi..
2011+ Duramax | 2017.5+ Ford | Bolt on traction bar kit | Standard Grade Rod Ends | Short Bed | 201036-72Nearly every diesel has a wheel hop issue right off of the factory floor. Even under stock power levels this wheel hopping can cause extremely costly repairs, including broken driveshafts, ..
2011+ Duramax | 2017.5+ Ford | Bolt on Duramax traction bar kit | Standard Grade Rod Ends | Long bed | 201036-86Nearly every diesel has a wheel hop issue right off of the factory floor. Even under stock power levels this wheel hopping can cause extremely costly repairs, including broken drives..