





Ford 6.9L & 7.3L Diesels ZF Transmission Input Shaft Repair Kit
$105.00
- Part Number: DS:ISRK
- Est. Ship Time: Usually Ships By Next Business Day

SSL SECURE
TRANSACTION

AUTHENTIC
PRODUCTS

GUARANTEED PREMIUM
QUALITY

A+ Rating
More from this brand
Starting From $189.00
The Input Shaft Repair Kit eliminates the high cost of disassembling the transmission and replacing the input shaft and front bearing and race. The Kit includes a new Pilot bearing with an additional 0.215 wear surface and a high-grade lip seal to keep the lubrication in and dirt out. The repair sleeve is hardened for more durability.
For all ZF5 and ZF6 transmissions in 6.9L and 7.3L FORD DIESEL vehicles.
Includes:
•New Pilot Bearing
•Installation Driver
•Bushing to resize your clutch alignment tool to the new pilot bearing for easy install.
Installation Driver makes the job easy.
- Remove the OEM pilot bearing.
- Install the new pilot bearing using the Installation Driver with a standard bushing driver handle.
- Insert the tapered end of the sleeve into the Installation Driver tool. With the bushing driver handle in place, drive the sleeve on to the end of the input shaft until it bottoms out.
- Push the white plastic bushing on your clutch alignment tool so you can properly center the clutch on the new pilot bearing.
- Finish the clutch install as normal.
Part number: ISRK

The Input Shaft Repair Kit eliminates the high cost of disassembling the transmission and replacing the input shaft and front bearing and race. The Ki..
$105.00
When a programmer or chip is used on the Power Stroke, it will increase the boost pressure causing the computer to de-fuel in an effort to bring boost..
$81.99
Gasket between transfer case and transmission, Ford part number E7TZ-7086-A. (E7TZ7086A)..
$23.55
Ford ZF6 Transmission Clutch Fork Anchor Stud.
Ford Motor Company part number: F81Z-7B602-AA..
$11.02
Replace a common failure point in your 2011-2016 Ford 6.7L Powerstroke to increase long term reliability with the XDP 6.7L Intercooler Pipe Upgrade (O..
$295.95
AIR DOG AND FASS PUMP USERS
INCREASE YOUR HORSE POWER AND FUEL PRESSURE
WITH YOUR P7100 CUMMINSFor stock fuel systems, please check out OFV010 ..
$27.95
Cummins 6.7L Intake Manifold Gasket
Also known as a grid heater gasket.
Cummins: 5264566..
$7.10
T6 Undivided Turbo Flange Gasket.
Cat: 7M7273..
$12.60
Set of 6
Cummins: 4062328
Image for reference only..
$23.74
Does your 6.7L Cummins have a blown head gasket?
Join the club. At a minimum, make sure your have your head surfaced to ensure it is flat. We also ..
$168.29
For 1994 to 2003 Ford 7.3L Powerstroke diesels.
Rear main or crankshaft seal.
Ford part number: F4TZ6701A (F4TZ-6701-A)..
$83.16
Discontinued (Updated 6/28/2024)
Clutch release fork for the 99-03 Ford 7.3L Powerstroke Diesel equipped with the ZF-6 Speed Manual Transmission
..
$0.00
13" x 1.375" Heavy Duty OEM ReplacementWide Organic FacingsRated @ 400HP / 800 ft lbs TorquePressure Plate
Kit includes:
3250# Pressure Plate
Cl..
$467.82
Pusher two piece intake manifold for the 7.3L Powerstroke turbo diesel engines in 1999.5-2003 Ford Superduty trucks.
The Pusher intake manifold for..
$349.99
A replacement for a faulty Hydraulic Assembly for your 1999 to 2003 For 7.3L Powerstroke. The South Bend SBHYDX-F67.3 is built to be an OE style repla..
$243.43
Fits: 1994-2003 Ford 7.3L Powerstroke
Replace your old rear main seal in your 1994-2003 Ford 7.3L Powerstroke with the Mahle rear main engine..
$53.10
Wicked Wheel® 2 for the 1992-2000 6.5L ChevyGreatly Improves Throttle ResponseIncreased HorsepowerLower EGTsEasy Installation - no modifications neede..
$159.00
INCLUDES OEM GASKETFor use with all stock waterpumps - replaces lower inlet neck on 96-2001 trucks. Will not work on 2002-2003 7.3L trucks.Ford O..
$59.00
New 7.3L Ford Powerstroke water pump with gasket. Fits all 1996 -2003 7.3L engines. All Dieselsite waterpumps come with a lifetime warranty to the ori..
$189.00
This plug replaces the air intake heater for less restriction in your intake.
The '99.5 and up 7.3L Powerstrokes and the 2001-2005 6.6L D..
$19.00
Made from High Speed Alloy Billet Steel. Made to overcome common cracks and fatigue breakage of the stock flex-plates caused by high mileage and ..
$525.00
If you have upgraded your 5R110 (TorqShift) to the 2009 pan and filter, you can use this kit to delete your OEM external filter.Kit includes all fitti..
$150.00
Use Dieselsite 6.0L Head Studs on the following vehicles:2003-2007 Ford F-Series Trucks with 6.0 Liter Powerstroke Diesel Engine2004-2010 Fo..
$499.00
Part 60PIPE03 for 2003 to Early 2004 Discontinued.Contact to Confirm Availability on 60PIPE05Dieselsite 6.0L Passenger Side Bellowed Up-PipesMade wit..
Starting From $179.00
NEW! Enhanced and Improved Standpipe and Dummy Plug Kit by Dieselsite.Each day we get technical calls with customers dealing with high pressure oil is..
$199.00
New 6.7L Ford Powerstroke primary water pump with gasket. Fits all 2011-2016 6.7L engines. All Dieselsite water-pumps come with a lifetime warranty to..
$209.00
Fits: 2011-2019 Ford 6.7L Powerstroke
DIESELSITE's high speed alloy billet steel flex plate's are made to overcome common cracks and fatigue breaka..
$595.00
New 6.7L Ford Powerstroke Secondary water pump with gasket. Fits all 2011-2019 6.7L engines with single alternators. All Dieselsite waterpumps come wi..
$69.00
For use on Dieselsite Overdrive Power Steering Pulley and other common engine pulleysIncludes: Puller Body, Jaw and Sleeve Assembly, Jack-screw, Butto..
$29.00
Wicked Wheel 2 for the 2016-2019 Nissan Titan XD 5.0L Cummins
Now available as a set or individually!
Greatly improves th..
Starting From $129.00
DIESELSITE STAINLESS STEEL BELLOWED CROSSOVER PIPE
*Note* These will not work with manual transmissions right now, but we are working on the ..
Starting From $249.00
1944-6OK - 13" Full Performance Organic Clutch Kit w/ South Bend Clutch Flywheel Rated for 400 hp 800ft-lbs torque 15k towing capacity. Kevlar Pilot B..
$849.18
1944-6OK-HD - 13" Full Performance Organic Clutch Kit w/ South Bend Clutch Flywheel 425 hp 900 ft-lbs torque, 20k towing capacityKevlar Pilot BushingI..
$948.18
1944-6OFEK - 13" half Organic half Feramic clutch kit w/ South Bend Clutch Flywheel Rated for 475 hp 1000ft-lbs torque 25k towing capacity. Kevlar Pil..
$1,075.62
Full Organic Non-Sfi Approved Street Dual Disc clutch kitIncludes Flywheel, Clutch Alignment Tool, & Throwout Bearing550 Hp 1100 Trq Rated For Tow..
$1,358.68
Direct fit replacement hydraulic assembly for 03-10 6.0 & 6.4 Powerstroke. This assembly is designed to be an OE replacement and is built to OE sp..
$243.43
Ford OEM replacement release fork for 6.0L & 6.4L Powerstroke with ZF-6 transmission.
Includes Pivot Ball
May not be compatible with a..
$90.58
1944-5OR-HD - 13" Full HD Performance Organic Clutch Kit w/o Flywheel 425 hp 900 ft-lbs trq 20k towing capacity. Will not work with OEM Dual Mass Flyw..
$679.34
1944-5R - 13" Full Organic Clutch Kit w/o Flywheel Stock HpWill not work with OEM Dual Mass Flywheel (DMF) Must have South Bend Clutch Solid Mass Flyw..
$452.89
1944-5K - 13" Full Organic Clutch Kit w/ South Bend Clutch Flywheel Stock HpStage: 1Use: STOCKFt-Lbs: 0 STOCK..
$679.34
Backordered with No ETA (Updated on 4/30/2025)
CRANK AND PRESSURE PLATE BOLTS FOR ALL DUAL DISC CLUTCHES FOR 7.3L POWER STROKE W/ ZF-5..
$33.97
FORD DUAL DISC DOUBLE SEALED ROLLER PILOT BEARING FOR 7.3L W/ ZF-5 TRANSMISSION
Part Number: 6303-2RS..
$16.98
CRANK AND PRESSURE PLATE BOLTS FOR SINGLE DISC FORD POWERSTROKE 7.3L W/ ZF-5 TRANSMISSIONPart Number: 7.3-5SPEEDSINGLEDISCBOLTKITPicture for reference..
$33.97
FORD THROW OUT BEARING FOR ZF-5 TRANSMISSION
Part Number: N1753SA..
$56.61
Backordered with No ETA (Updated on 4/30/2025)
ATFL75 - ALIGNMENT TOOL
FORD 1 1/4 10 SPLINE ALIGNMENT TOOL FOR ZF-5 TRA..
$5.66
1944-5OR - 13" Full Performance Organic Clutch Kit w/o Flywheel 400 hp 800 ft-lbs trq 15k towing capacity. Will not work with OEM Dual Mass Flywheel (..
$566.12