Shop By Category
Your Cart

03-10 Ford 6.0L/6.4L Powerstroke Colt Stage 2 Billet Cam

The 6.0 and 6.4 Power Stroke engines are designed with heavy emissions controls in mind. This means that the camshafts aren't designed to take full advantage of the air flow the heads can produce. They are designed to reduce emissions by keeping some exhaust gas in the cylinders. This is one of the reasons it is so hard to spool up a non-vgt turbo on your Power Stroke.


Colt Cams has worked with numerous performance shops over the years to perfect a suitable upgrade that not only performs better, but is reliable. These cams will help reduce EGT's (by getting the exhaust out of the cylinder and new air in), improve horsepower, improve the engine's performance throughout the entire rpm range (yes, you guessed it, by getting the exhaust out of the cylinder and new air in!) and can support up to 5,000 rpms.

Stage 2: NEW BILLET camshafts are also designed to be a drop in. These have a slight lift and duration increase over the Stage I but are very similar. The advantages to a Stage 2 over the Stage I are:

This is a new camshaft BILLET (with a stock base circle size) it has been heat treated 5 X deeper than stock. This is a great alternative to having to send in a used core, saving in shipping and a possible charge for welding and fixing worn lobes, and
These are new and in stock!

NOTE!!!!! When we say our camshaft is a straight drop in, we mean: In almost all cases.
However, due to many contributing variances in an engine: heads planed, block decked, valve recession etc... any cam including stock, should always be checked for clearance before start up!

Colt Cams part number: C.849.H

ROF. I.D. #

 

Duration

Cam
Lift

Valve
Lift

WRITE A REVIEW

 

Please login or register to review

 
Lame California Prop 65 Notice