99-04 Ford F250/F350 4x4/2x4 Power Stop Cryo'ed Rear Brake Rotor Pair

1999-2004 Ford F-250, F-350 Superduty Power Stop Cryo Rear "Frozen" Rotors (Pair-Set).

These rotors are cooled to -300 then slowly returned to room temperature, and then heat cycled as a final step.
This process increases tensile strength and gives the rotor an extra level of protection against warping.
They also feature the machined Vac-U-Slot's to help each rotor to shed heat and push water off the surface for better stopping power.
Each rotor is finished with a military type II/class II cadmium plating for the ultimate in rust resistance.

For the ultimate stopping power in your Ford Truck, you need a set of Power StopBrake Rotors. Excessive heat can cause resins in your brake pads to vaporize. As the brake pad wears, the used friction material will turn to fine dust. This built up boundary of heat, gas, and dust between the pad and rotor surfaces, inhibiting performance drastically. Power Stop's exclusive technology drastically reduces this heat and helps to keep the brake pad material renewed and clean, making your braking performance really shine both on the street and the track.

Power Stop's exclusive Vac-U-Slots are machined into the rotor and help evacuate gasses and dust, shed heat, and keep the brake pad surface free of dust. Unlike cross-drilled and slotted rotors, these rotors will not crack under the heat and stress of high-friction braking. And in wet, raining conditions, their Vac-U-Slot helps push water off the braking surface for better stopping power. This allows your brakes to achieve maximum performance in both wet and dry conditions, giving your Ford truck the best, most consistent stopping power available in aftermarket rotors. Get a set of Power Stop rotors and pick up a pair of Hawk Brake Pads for truly unmatched stopping performance and balance - after all, the faster your truck can go, the more your brakes need to be able to take the heat and keep coming back for more.

• Exclusive Vac-U-Slot technology evacuates trapped heat & gases
• Vac-U-Slots help renew brake pad surface
• Less heat means better braking performance and less warping
• Best when combined with Hawk Brake Pads

Power Stop Part Number: 126.65071-CSR CSL

*Applications:
F250-3/4 TON 2WD 1999-2002 SRW(Except Mono Beam applications)
F250-3/4 TON 2WD 2003-2004 4-WHEEL ABS, SRW, 8 LUG M14X2.0 BOLT
F250-3/4 TON 4WD WITH BUILD DATE:
ALL LATE 98 Through 03/14/99**
F250-3/4 TON 4WD WITH BUILD DATE:
ALL 03/15/99-2004
F350-1 TON 2WD 1999-2002 Superduty W/SRW (Except mono beam application)
F350-1 TON 4WD WITH BUILD DATE:
All Superduty LATE 98 Through 03/14/99**
F350-1 TON 4WD WITH BUILD DATE:
Superduty W/SRW 03/15/99-2004

**VERY SPECIFIC APPLICATION PLEASE CALL IF UNCERTAIN OF BUILD DATE.

1 Rear Rotor Pair

PLEASE NOTE: ROTORS THAT ARE ORDERED "FROZEN" ARE SHIPPED OUT TO BE FROZEN FRIDAY EVERY WEEK, AND WILL SHIP THE FOLLOWING FRIDAY.
FOR EXAMPLE, IF YOU ORDER ROTORS ON A THURSDAY, YOUR ROTORS WOULD SHIP THE FOLLOWING FRIDAY AFTER THEY HAVE BEEN FROZEN.