Cart is empty
This is a completely redesigned turbo.
There is nothing "stock" about it.
Each housing was cast from new molds and machined to new specifications for the larger turbine and compressor wheels.
*Large ported shroud compressor with a 10mm larger exducer for flow increases exceeding 30%. The compressor wheel is larger and flows about the same as the Garrett ball-bearing turbo.
*1.00 T. Hsg. instead of the stock .84. (For lower drive pressures and extended top-end horsepower.)
*The stock Powerstroke turbo has a baseline setting of just a few pounds and the computer controls pressure output from that base. This actuator has a 20 lb. base setting and can be adjusted from there since the turbo is easily capable of withstanding more pressure.
*360 degree thrust bearing and the shaft shank that is 5/16" in diameter instead of original 1/4". This gives you the strength and durability you need.
We require a $150 refundable core deposit, you are responsible for shipping costs to ship the core back.
This turbo can be mounted on a early 99 7.3L if you upgrade to the late 99 turbo pedestal, up-pipes, and intake plenums.
This turbo is identical to the "Ball Buster", "HTPS" and the "Phat Stroker" turbos you may have seen advertised elsewhere.
1 Year Warranty
No posts found