Cart is empty
3X3X8 BACKORDERED MID-JUNE
99-2003 Ford 7.3L Powerstroke Diesel Intercooler hose/boot kit
2) Y-pipe couplers
2) intercooler connection hoses.
All hoses are heavy duty silicone construction and will help to prevent leaks and hoses blowing off.
The intercooler connection hoses are long enough to double clamp if you need to.
WE HIGHLY RECOMMEND PURCHASING THE CLAMPS WITH THE KIT. THESE BOOTS ARE THICKER THAN STOCK AND WILL BE DIFFICULT TO USE WITH STOCK CLAMPS.
*NOTE:Most late model 7.3L intercoolers with plastic tanks use 3x3-1/4"x 8" long hose for both sides and the older units with metal end tanks use a 3"x3"x8" long on the drivers side and the 3"x3-1/4"x8" on the passenger side.
Please measure your connections before ordering just in case. Available as shown or with 12 High quality Spring-loaded constant torque hose clamps.
Early '99 Trucks (build date prior to 12/07/98) require smaller y-pipe couplers and due to the fact that they are a transition hose cost a little more. Make sure that you order the right kit below. If you order the clamp option for the early 99 trucks it only ships with 8 instead of 12.
However, we have still found variations in intercooler pipe sizing. PLEASE MEASURE & CONFIRM WHICH SIZE YOU HAVE BEFORE ORDERING!
We don't have spring-loaded clamps small enough. Just reuse the stock y-pipe clamps. Any questions feel free to call.
No posts found