Upgraded & Replacement Parts

INCLUDES OEM GASKETFor use with all stock waterpumps - replaces lower inlet neck on 96-2001 trucks. Will not work on 2002-2003 7.3L trucks.Ford OE number F81Z8592BANavistar 1831072C1Part number: LWPN..

New 7.3L Ford Powerstroke water pump with gasket. Fits all 1996 -2003 7.3L engines. All Dieselsite waterpumps come with a lifetime warranty to the original purchaser.Ford F81Z-8501-FAMotorcraft PW455Part number: WP73..

QK4846 2nd Design Knuckle and Hub Seal Kit with QT1515 Installer (Old Kit number was QK4610S) Save $$ over buying individually priced QT1515 Seal Installer plus the seals and o-rings that need to be replaced anytime your 2003 to 2004 Ford Super Duty® or 2003 to 2005 Ford Exc..

QK4678 2005-2016 Ford F-250, F-350 Super Duty® Knuckle and Hub Seal Kit with Installer includes the original equipment seals, o-rings, and gaskets that MUST be replaced anytime the axle shafts are removed from your Super Duty® front axle plus one of our heavy-duty TS1530 Knuckle Seal ..

TS1530 Knuckle to Axle Shaft Seal Installer for 2005-up Ford Super Duty® F-250, F350 4x4 Trucks Use to install those easily damaged and expensive axle shaft to knuckle seals on your outer axle shaft. TS1530 is also used to correctly seat the seal and shaft assembly into the steering knuckle at ..

QK4983 Universal Dana 60 Oil Bath Inner Axle Seal and Tool Kit with Ford 2nd design universal fit Dana 60 oil bath type inner axle seals and adjustable depth installer tool set is specific to 2011-up Ford Super Duty, but these excellent seals will also fit 1999-2010 Ford Super Duty 4x4's. QK498..

This is a new replacement Shift Cable Clip and Cube only. This product allows you to avoid purchasing the entire cable assembly from Ford.If you need the entire assembly, the Ford complete cable assembly part number is XC3Z-7E395-CA.Applications:1990-1997 Ford E4OD 1999-2003 Ford 4R100 200..

The BD-Power 1041241 Flex Plate is an immense upgrade over the stock flex plate in your E4OD or 4R100 equipped 1994-2003 7.3L Powerstroke. This flex plate is CNC machined out of quench and tempered 100ksi steel to be 1.5x thicker than the stock Flex plate. Machined in-house at BD, this flex plate in..

The leak at the dipstick flange is a well known issue with the 7.3 Powerstroke engine. The leak develops because the factory O-ring mounted inside the adapter swells over time due to exposure to oil. As the seal swells it actually deforms the inner piece of the adapter causing the outer nut to loose..

Made from High Speed Alloy Billet Steel. YES! THE DIESELSITE FLEXPLATE WAS DESIGNED TO WORK WITH OEM AND AFTERMARKET BILLET TORQUE CONVERTERS.Made to overcome common cracks and fatigue breakage of the stock flex-plates caused by high mileage and higher horse power builds. With many of the ..

NOTE:  THESE WILL NOT FIT 1994-1997 STOCK TURBO SETUPS!  THIS IS FOR THE H2E CONVERSION KIT ONLY!Finally a solution to the leaking donuts on the H2E style turbo conversions. Works on any Hypermax turbo kit for the 94-03 7.3L and many other styles that use the T4 or T4i mount kits available..

Use Dieselsite 7.3L Head Studs on the following vehicles:1994-2003 Ford F-Series Trucks with 7.3 Liter Powerstroke Diesel EngineFord E-Series Vans with 7.3 Liter Powerstroke Diesel EngineFord Excursion w/ 7.3 Liter Powerstroke Diesel EngineIncludes the following Dieselsite Pieces..

DieselSite ICP Sensor for 1994-2003 Ford 7.3L PSDStainless Steel Body.OE cross-reference:F6TZ- 9F838A1807329C9212 month unlimited mileage warrantyPart number: ICP73..

This SES Suspension Upgrade fits the rear suspension of a Ford F-350 pickup truck. Each laser cut piece of steel is precision bent and powder-coated to ensure a quality fit. We’ve engineered our hollow rubber springs to deliver a progressive spring rate. In other words, the more weight that pushes d..

New 7.3L Ford Powerstroke water pump with gasket. Fits all 1994-1995 7.3L engines.  All Dieselsite waterpumps come with a lifetime warranty to the original purchaser.Note: There are some OEM pumps on 1996 model year 7.3L engines that look like this one piece design. If you have a one piece desi..

The Alliant Ambient Air Temperature (AAT) Sensor is a direct, factory replacement sensor for your 1994-1997 Ford 7.3L Powerstroke. Built to meet or exceed OE Specs, this sensor can be used in place of the OE part numbers: 9U2Z12A648A, DY1145Aliant part number: AP63490..

The Alliant Manifold Absolute Pressure (MAP) Sensor is a direct, factory replacement sensor for your 1994-1997 Ford 7.3L Powerstroke. Built to meet or exceed OE specs, this MAP sensor can be used in place of the OE part numbers: F4TZ9F479A, DY708Aliant part number: AP63489..

New! This Dieselsite (now in 409 Stainless Steel) up-pipe kit was designed to replace the poorly designed OEM standard equipment up-pipes and donut gaskets that typically leak. This design allows for expansion and contraction without stressing the actual gasket and is a direct replacement ..

Dieselsite 7.3L 1994-1997 OE replacement Fan Clutch.1 Year WarrantyPart number: OBSFC..

The XDP HD Replacement Battery Cable Set XD420 is a high-quality replacement for the corroded or frayed battery cables in your 1994-1997 Ford 7.3L Powerstroke. Old or damaged battery cables can cause many issues in your truck. From hard-start, to no-start conditions, and even charging system issues...

TS4961 7 Piece Ball Joint Tool Set for 1994-1999 Dodge Dana 60, 1980-2004 Ford Dana 50, and 1992-2004 Ford Dana 60 front axles.Also See TS4511 8 Piece Tool Set for 1994-1999 Dodge Dana 60, 1980-2005 Ford Dana 50, 1992-2004 Ford Dana 60, and 2005-up Ford Dana Super 60 Front Axles.Need ..

S4511 8 Piece Ball Joint Press Set for Dana Model 50 and 60 Axles Applications: The safest and most efficient way to replace the Ball Joints on your Ford or Dodge heavy-duty 3/4 ton or 1 ton 4x4 truck with a Dana 50 or Dana 60 front axle. Change your Ball Joints the easy and safe way! The seven, pre..

**Backordered**Comes with fittings for both 3/8" and 1/2" applications.  Hose not included.Performance and Reliability – can you have both?While we all want maximum power out of our rigs, understanding the effects that performance upgrades have on the other parts of your truck is essential. Whe..

This plug replaces the air intake heater for less restriction in your intake. The '99.5 and up 7.3L Powerstrokes and the 2001-2005 6.6L Duramax engines are equipped with a Air Intake(Grid) Heater as well as a glowplug circuit.  The Air Intake heater is not needed in most cases and was desi..

From 1999-2003 the Ford 7.3L Automatic Transmission (4R100) had an external cooler bypass tube that redirected transmission fluid from the pump output back to the return line of the transmission. The bypassing of the cooler was supposed to happen until the fluid reached operating temp..

Features:Easy UpgradeIncreased Injector LifeIncreased Fuel PressureGreat For Stock & Modified TrucksDFuser Part Number: DFR-1002448..

This is a full flow exhaust outlet without the Exhaust Backpressure Valve (EBV). Will fit all stock GTP38 Turbos from early 1999-2003 7.3L stock and Garrett GTP38R turbos with non-EBV pedestals.High Flow outlet flange for the 1999-2003 7.3L Superduty without the&nb..

The XDP HD Replacement Battery Cable Set XD428 is a superior replacement for the frayed or corroded battery cables in your 1999-2003 Ford 7.3L Powerstroke. Old or damaged battery cables can cause a multitude of issues in your truck. From poor charging to hard-starts and even no-start conditions. Imp..

The Ford Oil Pan F7TZ-6675-BBB is a genuine Ford replacement for the rusty, leaking, dented or damaged oil pan in your 1999-2003 Ford 7.3L Powerstroke. This oil pan is manufactured with a durable coating and to meet or exceed the specification of the original pan in your truck.FEATURES:Sold Individu..

QT1515 Axle Shaft to Knuckle Seal Installer for Ford Excursion and 1999-2004 Ford Super Duty easily installs those fragile, expensive axle shaft to knuckle seals on your outer axle shaft and is also used to seat the seal and shaft assembly into the steering knuckle to the correct depth. This is..

Zone 4" Basic lift kits offer superior quality at affordable prices. Adding a Zone suspension lift gives your truck a taller, more aggressive stance and allows you to add larger tires.Constructed with the best materials, Zone lift kits feature Zone shocks, CNC machined steering knuckles, and top not..

The Carli Suspension Front Track Bar Drop Bracket is constructed from ¼ cold-rolled steel and gusted for strength, then topped with a black powder coat finish. Using all factory mounting points, this drop bracket perfectly matches the factory track bar geometry to that of our Drop Pitman arm to keep..

QK4808 Fixed Depth Inner Axle Seal Kit for 1999-2005 Ford Dana 50 Monobeam Front Axles. Fixed Depth QK4808 uses QT1127 Model 50 Seal Installer which will stop when your new seal is installed to the original depth. Makes life simple. See Tech Note 3 below! This Kit will ..

QK4610 Type 1 Super Duty Knuckle Seal Kit includes our heavy-duty QT1515 Knuckle Seal Installer, plus 2 each QU40233 Unshielded Knuckle Seals, QU20023 wheel hub-to-knuckle O-Rings and QU20044 lockout hub O-Rings. Seal replacement is required anytime the a..

The Ford F81Z-6C673-AA Boost Control Solenoid is a genuine Ford replacement for the malfunctioning boost control solenoid in your 2004-2007 Ford 6.0L Powerstroke. This boost control solenoid is manufactured to Ford’s strict calibration standards to meet or exceed the specifications of the original s..

New! This Dieselsite (now in 409 Stainless Steel) up-pipe kit was designed to replace the poorly designed OEM standard equipment up-pipes and donut gaskets that typically leak. This design allows for expansion and contraction without stressing the actual gasket and is a direct replacement ..

Features:Top plate and housing CNC machined from billet high-strength Aluminum with black anodized finish, durable and rust-resistant; Four brass fittings, 2 pcs 1/2” NPT x 1/2" hose ID and 2 pcs 1/2" NPT x 5/8" hose ID.Dual-ports allow for integrated return line install or double fuel feeds for i..

Replace the old thermostat housing on your 1999.5-2003 Ford 7.3L Powerstroke with the XDP 7.3L Billet Thermostat Housing XD277. Unlike your factory thermostat housing, the XD277 is built to last, featuring a billet aluminum construction for durability and a black anodized finish for superior corrosi..

Is your dash bouncing around like its at the club? Obnoxious never ending rattle? Likely your lower dash mount on the passenger side is broken. So we came up with a simple straight forward install that will last the life of the truck.   This part is laser cut and precision bent to fit perfectly. ..

Protect the cooling system in your 1999.5-2003 Ford 7.3L Powerstroke with the XDP 7.3L Coolant Filtration System XD249. Designed to remove contaminants like casting sand, sediment, and other debris, the Coolant Filtration system helps protect vital cooling components to ensure reliability and long s..