Intercoolers & Boots

These couplers are made of heavy duty reinforced silicone and will help to stop the common leaking between the intake manifold and engine connections on your 7.3L Powerstroke. Use these couplers with the high performance intercooler tubes and Hump Hoses for a leak free system. Sold in pairs 2" Coupl..

Upgrade those weak OEM boots with Vulcan's high quality silicone boots with stainless steel spring loaded T-Bolt clamps.Their silicone boots are not off the shelf boots as you may see elsewhere. As with all their boot kits, they are made to their specs, these units feature internal bump rings to mat..

Banks Techni-Cooler Intercooler system includes mandrel-bent 3" high-flow boost tubes ... large, high-efficiency all-aluminum end tanks ... a wide-open inlet and outlet ... and a thick core area with impressive volume. And because the stock manifold inlet flows more air to one side of the cylinder b..

99-2003 Ford 7.3L Powerstroke Diesel Intercooler hose/boot kit  Includes 2)Hump Hoses, 2) Y-pipe couplers 2) intercooler connection hoses.All hoses are heavy duty silicone construction and will help to prevent leaks and hoses blowing off. The intercooler connection hoses are long enough to double c..

If you're looking for a replacement for discontinued part number 1820102C2 for your Powerstroke, we've got you covered. This Silicone 45 Degree Reducing Elbow is designed specifically to replace your turbo-to-breather silicone hose. This solution is a less expensive and better quality fix than Ford'..

These couplers are made of heavy duty reinforced silicone and will help to stop the common leaking between the intake manifold and engine connections on your early 99 7.3L Powerstroke. Use these couplers with the high performance intercooler tubes and Hump Hoses for a leak free system. Sold in pai..

Intercooler to tube connection transition hose. 3"x 3.25"ID x 8" long. This hose is often used to install a stock Ford 6.0L intercooler into the 99-2003 Powerstrokes with 7.3L engines. It is also used for 2002 and 2003 7.3L stock intercooler with plastic tanks and Ford part# 2C34 6K775AA. You ma..

Bolts right on, includes couplings and clamps, and will out perform any factory set up! Features: • Outflows stock intercooler tubes by up to 5%• Replacement tubes for both hot and cold side of the intercooler • Constructed out of 3" mandrel-bent aluminum tubing• Powder-coated wrinkle-black for he..

Nothing can put an end to a quarter mile pass or hill climb faster than a turbo hose that blows off. Now, you can eliminate this problem with BD's hose and clamp kits. BD boots can withstand over 100 psi of boost and are secured by rugged, spring-loaded, stainless steel clamps. Engineered fo..

Whether at the track or on the strip don't let a stock intercooler boot ruin your day. Sinister Diesel's upgraded silicone boots and clamps won't split or crack and come with thier LifeTime warranty. Kit Includes:Heavy Duty High Temperature Four Ply Silicone Boots with Sinister LifeTime warranty..

These couplers are made of heavy-duty reinforced silicone and will help to stop the common leaking between the intake manifold and engine connections on your 7.3L Powerstroke.  Use these couplers with the high-performance intercooler tubes and Hump Hoses for a leak free system. Sold in pairs..

   This kit includes the two boots that connect the intake manifold piping ("Spider") to the intake plenums on 1999.5-2003 7.3L PSD trucks.  Also included are four worm gear drive clamps.  4in x 6In THESE BOOTS ARE NOT FOR USE ON THE INTERCOOLER PIPING!    Stock boot material is silicone. However..

99-2003 Ford 7.3L heavy duty drivers side intercooler hose. These hoses are 3"x3"x8" long and fit the stock intercooler on the drivers side with metal end tanks...

Banks Techni-Cooler Intercooler system includes mandrel-bent 3" high-flow boost tubes ... large, high-efficiency all-aluminum end tanks instead of the wimpy stock plastic ones that can rupture under high-boost conditions ... a high-flow inlet that distributes air evenly across the intercooler for an..

7.3L Ford Powerstroke replacement SPEARCO High Performance intercooler upgrade We have measured an average intake air temperature drop of 336.8 degrees on a load dyno using aftermarket injectors. At 37 PSI boost, we measured less than 1 PSI of pressure loss across the core. Max EGT's on a SuperF..

Direct fit for the 1999–2003 Ford 7.3L Powerstroke Tube-and-fin construction with cast aluminum end tanks End tanks strategically designed for optimal airflow Improves airflow, power, and EGTs Mishimoto Lifetime WarrantyMishimoto engineers know you love your Ford which is why we've developed..

This BladeRunner Intercooler represents the next generation of intercoolers. The BladeRunner intercoolers utilize a 3" bar and plate core design that is larger than stock and outflows OE style tube and fin core designs by 32%! End Tanks: The unique BladeRunner end tanks are constructed out of 3/16'..

A Breath of Fresh Air... BD’s free flowing Charge Air Cooler (CAC) - or intercooler - design with streamlined external air passages improves engine cooling while offering less fan noise and less blade resistance, plus, improving engine power and efficiency of the radiator and air conditioning heat..

Mishimoto is proud to release a direct-fit silicone boot kit with DuraCore™ technology designed specifically for the 7.3L Ford Powerstroke. Mishimoto DuraCore™ technology is the synthetic material that comprises the innermost layer of all Mishimoto silicone diesel boots. Compared to normal silicone,..

The CSF OEM+ Replacement Intercooler is manufactured from the highest quality components to provide you with the best aftermarket OE replacement intercooler available for your 1999-2003 Ford 7.3L Powerstroke. CSF is an ISO certified cooling system manufacturer with many OEM customers around the worl..

1999 to 2003 Ford 7.3L Powerstroke OE Turbo Inlet Boot ONLY. Ford: F81Z9C681AA (F81Z-9C681-AA)..

Irate Diesel Performance Intercooler Boot Kit w/Clamps 1999-2003 Ford 7.3L Powerstroke All boots and clamps needed for stock or aftermarket intercooler systems and turbo systems. Part number: IDP00253...

FITS 1999.5-03 7.3L Cylinder Head Inlet To CAC Adapter; Red Oxide Engine To Charge Air Cooler Tube; Blue Hose INCLUDES BOOTS AND CLAMPS  OE #: YC3Z-6C640-PA, 1C3Z-6C640-LA, F4TZ-8287-A, 1C3Z-6K786-EA, 1C3Z-6K786-CA, C3Z-6K786-CA, 6C2Z-6K786-BA Dorman Part number: 904-220..

The kit includes the two boots that connect the intercooler piping to the intercooler on both sides of the radiator. It includes four T-bolt spring clamps. The spring bolt clamps are 300 series stainless steel with zinc coated bolts with a 300lb clamping strength. Recommended torque is 60 in/lbs. Th..

This boot kit is designed to allow the installation of the 6.0L intercooler into the 7.3L Ford Powerstroke. Stock boot material is silicon. However, this type of material is NOT oil compatable. This is unacceptable in our application as the Powerstroke incorporates a closed crankcase vent system. Th..

The CSF Heavy-Duty Intercooler is manufactured to provide durability and performance on your 1999-2003 Ford 7.3L Powerstroke. This heavy duty Intercooler is built using a bar and plate design with industry leading testing methods to maximize airflow and heat dissipation. These techniques allow CSF t..