94.5-03 Ford Powerstroke 7.3L CNC Fab Hot Street 238cc Hybrid Injectors

Fits: 1994.5-2003 Ford Powerstroke 7.3L 

ATTN 99-03 truck owners! These injectors are SINGLE SHOT injectors and require a chip or tuner properly calibrated to run single shot injectors. 

These CNC Fabrication, LLC remanufactured Mild Street (238/80, 238/100, or 238/200) hybrid injectors will put new life back into your 94.5-03 7.3L Ford Powerstroke.

Commonly called a Stage 3, these "Hot Street" 238cc hybrid injectors will typically produce around 500-550hp with proper supporting modifications depending on the year of your truck.  80% nozzles will give better towing capabilities and run cleaner, 100% nozzles will give a more top end power, more low-end torque (good balance of work and fun), 200% nozzles will give the most power but expect EGT's to be higher.  These are by far the most popular sized injector to daily drive and give a Camaro a run for its money.  Mainly because a T4 turbo mount is not "necessary", nor are billet rods and a plate girdle.

Not available for sale in the state of California

Features:

• Decent for towing, or just wanting a sizeable power increase
• 80%, 100%, or 200% over nozzles
• Tungsten Coated Plungers and Barrels
• O-rings
• Nozzle and Intensifiers Springs
• Better than OE specifications
• We do NOT use shims, these injectors are machined to set proper armature clearance
• Each set of injectors will come with flow sheet test results
• Tested on the newest Hartridge flow bench using the latest injector technology

Core shipping return label is included for orders shipping to the lower 48 states.  

CNC Fab: 42204x
Part Number: 422043