Buy 7.3L Powerstroke Engine Parts

This is  (1) Exhaust Rocker Assembly. For an entire engine replacement you need a quantity of 8 intake and 8 exhaust.  Ford part number: F4TZ-6564-B..

This is  (1) Intake Rocker Assembly. For an entire engine replacement you need a quantity of 8 intake and 8 exhaust.  Ford part number: F4TZ-6564-A..

Rebuild your 7.3L Powerstroke with Mahle .010 - Reduced Compression Piston With Rings. Piston is for use in overbore applications and has a .010" reduced compression height. Sold in a full setBore: 4.12 inThickness: .11 inWidth: .136Part number: 224-3409WR.010..

Rebuild your 7.3L Powerstroke with Mahle .010 - Reduced Compression Piston With Rings. Piston is for use in overbore applications and has a .010" reduced compression height. Sold in a full setBore: 4.15 inThickness: .11 inWidth: .136Part number: 224-3409WR.040..

INCLUDES OEM GASKETFor use with all stock waterpumps - replaces lower inlet neck on 96-2001 trucks. Will not work on 2002-2003 7.3L trucks.Ford OE number F81Z8592BANavistar 1831072C1Part number: LWPN..

New 7.3L Ford Powerstroke water pump with gasket. Fits all 1996 -2003 7.3L engines. All Dieselsite waterpumps come with a lifetime warranty to the original purchaser.Ford F81Z-8501-FAMotorcraft PW455Part number: WP73..

Backordered with No ETA   **Updated on 11/03/2023**Direct replacement right side valve cover for 96-03 Ford 7.3L Powerstroke by Dorman.Part number: 264-5116..

This plug replaces the air intake heater for less restriction in your intake. The '99.5 and up 7.3L Powerstrokes and the 2001-2005 6.6L Duramax engines are equipped with a Air Intake(Grid) Heater as well as a glowplug circuit.  The Air Intake heater is not needed in most cases and was desi..

Sold in sets of 2, must purchase with 2 set for its quantity.Set Includes:2 large o-rings, seals breather adapter cover to the valve cover2 small o-rings for screws Ford Part Numbers:Small O-Ring: F4TZ-6769-ALarge O-Ring: F4TZ-6769-C International Part Numbers:Small O-Ring: 1824452C2 Large O-R..

If you are wanting to keep your 7.3L PMR Powerstroke on the road for the long haul, you need the high quality parts like these Gator Fastener Rod Bolts.These rod bolts have a much higher strength and will not stretch like the factory bolts will.***Will not fit engines with Forged Metal Connecting Ro..

OEM Ford Rod for the 01-03 Ford 7.3L Powerstroke Diesel equipped with PMR/Powder Metal Connecting Rods16 required per engine, these are sold individually. Photo is for representation only. Ford Part number: 1C3Z-6214-AA..

OEM Thermostat Housing for 1994-1997 Ford PSD 7.3L This is a replacement Ford thermostat housing. In many cases, when changing the thermostat, the housing does not want to re-seat and seal properly. They are made of stamped steel and are not treated very well from the factory against rust. They..

Whether building your 1994-2010 Ford Powerstroke valvetrain for daily driving or for the track, don’t risk engine failure from reusing the old lifters, replace them with the Powerstroke Performance Lifter Set. These hydraulic roller lifters are sold in sets of 16 and can withstand the abuse from add..

Ford Motorcraft OEM engine oil pump for 1996 Ford 7.3L Powerstroke.FitmentYearMakeModelBody & TrimEngine & Transmission1996FordE-350 EconolineBase, XL7.3L V8 - Diesel1996FordE-350 Econoline Club WagonChateau, Chateau HD, Custom, XL HD, XLT, XLT HD7.3L V8 - Diesel1996FordF-250Eddie Bauer, Spe..

Fits: 1994-2003 Ford 7.3L Powerstroke The Mahle Lower Engine Gasket Set gives you the seals and needed components to reseal the lower engine on your 1994-2003 Ford 7.3L Powerstroke. This gasket set is built with OE style gaskets and seals that are a direct replacement for what is currently on y..

Alliant Engine Oil Cooler O-Ring And Gasket Kit includes all required seals to install the oil cooler for 94-03 Ford 7.3L Powerstroke.Part number: AP0004..

Direct fit replacement glow plug relay for 94-03 Ford 7.3L Powerstroke by Alliant Power.Part number: AP63405..

Direct fit replacement water pump for 94-03 Ford 7.3L Powerstroke by Alliant Power. Part number: AP63501..

Fits: 1994-2003 Ford 7.3L Powerstroke The Cometic MLS Head Gasket for your 1994-2003 Ford 7.3L Powerstroke is comprised of multiple embossed layers of both coated and uncoated stainless steel. The embossed outer layers of the gaskets meet the demands of a variety of harsh sealing environments, ..

Fits: 1994-2003 Ford 7.3L Powerstroke The Cometic StreetPro Bottom End Gasket Kit for your 1994-2003 Ford 7.3L Powerstroke provides the seals and gaskets needed to reseal the bottom end of your engine. Cometic gasket has spent hundreds of hours of research and development building these kits to..

The leak at the dipstick flange is a well known issue with the 7.3 Powerstroke engine. The leak develops because the factory O-ring mounted inside the adapter swells over time due to exposure to oil. As the seal swells it actually deforms the inner piece of the adapter causing the outer nut to loose..

The leak at the dipstick flange on the side of the engine oil pan is a well known issue with the 7.3 Powerstroke engine. The leak develops because the factory O-ring mounted inside the adapter swells over time due to exposure to oil. As the seal swells it actually deforms the inner piece of the adap..

Dorman dipstick flange repair kit allows you to repair the leaking main o-ring without removing the oil pan. The repair kit is reusable and comes with enough o-rings to repair 5 vehicles; includes 5 dipstick flange o-rings, 5 dipstick o-rings and a special designed retaining hook that holds the flan..

This engine oil cooler mount is designed to match the fit and function of the original mount on specified vehicles, and is engineered for durability and reliable performance.Direct replacement - this engine oil cooler mount is designed to match the fit and function of the original mount on specified..

Direct fit replacement power steering reservoir for 94-03 Ford 7.3L Powerstroke by Dorman. Part number: 603-900..

When a coolant thermostat housing eventually corrodes and leaks, the only original equipment solution is to replace the entire assembly. This Dorman OE FIX flange repair kit is an add-on support that repairs the housing at a lower cost.Smart fix - this diesel thermostat housing and seal kit is an ad..

Replacement glow plug controller for 94-03 Ford 7.3L Powerstroke by Dtech.Part number: DT730019..

Injection pressure regulator valve seal kit for 94-03 Ford 7.3L Powerstroke by Dtech. This kit can be used to repair the IPR on 94-03 Ford 7.3L Powerstroke. Part number: DT730024..

Direct replacment exhaust manifold bolts for 94-03 Ford 7.3L Powerstroke.Individual Part number: F4TZ-9S425-A..

Direct fit replacement exhaust manifold gasket for 94-03 Ford 7.3L Powerstroke. Part number: F4TZ9448A..

Fits: 1994-2003 Ford 7.3L Powerstroke The Ford Motorcraft Glow Plugis a replacement for the defective glow plug in your 1994-2003 Ford 7.3L Powerstroke. This glow plug is a genuine Ford part that is thoroughly tested to ensure a long service life for your truck. Sold individually Genu..

Genuine ford replacement glow plug relay for 94-03 Ford 7.3L Powerstroke. Part number: F81Z-12B533-AC..

Genuine Ford replacement for damaged IPR seals for 94-03 Ford 7.3L Powerstroke. Part number: 4C3Z-9C977-AA..

Fits: 1994-2003 Ford 7.3L Powerstroke The Ford Rear Main Crankshaft Seal is a genuine Ford replacement for the leaky crankshaft seal in your 1994-2003 Ford 7.3L Powerstroke. This cranks seal is constructed to Fords stringent quality standards and is designed to be a drop-in replacement for a st..

Forged 4340 Steel Connecting RodsThe Manley Pro Series I-Beam rod has become the benchmark for fully machined/billet style high end connecting rods in the performance industry. Lightweight and standard weight designs targeting specific markets combined with their expertly refined manufacturing proce..

Gator Fasteners Heavy Duty Head Studs are design to hold up to the pressure of your 7.3L whether you're building a tow rig, race truck or just a daily driver. These studs have a much higher strength and will not stretch like the factory bolts will. The Gator Fasteners Performance Head Studs are..

Gator Fasteners Heavy Duty Main Studs are design to hold the bottom end of your 7.3L together whether you're building a tow rig, race truck or just a daily driver. These fasteners have a much higher strength and will not stretch like the factory bolts will. The Gator Fasteners Performance Main ..

Use Dieselsite 7.3L Head Studs on the following vehicles:1994-2003 Ford F-Series Trucks with 7.3 Liter Powerstroke Diesel EngineFord E-Series Vans with 7.3 Liter Powerstroke Diesel EngineFord Excursion w/ 7.3 Liter Powerstroke Diesel EngineIncludes the following Dieselsite Pieces..

Backordered til December 7th   **Updated on 11/21/2023**Rebuild your 7.3L Powerstroke with Mahle .020 - Reduced Compression Piston With Rings. Piston is for use in overbore applications and has a .010" reduced compression height. Sold in a full setBore: 4.14 inThickness: .11 inW..

Rebuild your 7.3L Powerstroke with Mahle .030 - Reduced Compression Piston With Rings. Piston is for use in overbore applications and has a .010" reduced compression height. Sold in a full setBore: 4.14 inThickness: .11 inWidth: .136Part number: 224-3409WR.030..

Fits: 1994-2003 Ford 7.3L Powerstroke Mahle Original piston ring sets are designed to be installer-friendly. They are pre-lapped to seat immediately, virtually eliminating break-in time. Ring materials and coatings, as well as ring tension, are all optimized for reduced friction and extended li..

Fits: 1994-2003 Ford 7.3L Powerstroke (.030)Add the MAHLE 41768.03 Complete Piston Ring Set (.030) to your 1994-2003 Ford 7.3L Powerstroke. Manufactured to meet OEM specifications, the Complete Piston Ring Set maintains a factory performance. The rings that make up the Complete Piston..

Direct replacement Cylinder Head Bolts for 94-03 Ford 7.3L Powerstroke by Mahle.Part number: GS33379..

Fits: 1994-2003 Ford 7.3L Powerstroke The Mahle Engine Gasket Set is an all-inclusive kit to help rebuild the engine in your 1994-2003 Ford 7.3L Powerstroke. This gasket set features gasket, seal and O-rings that are engineered to meet exceed the factory specifications while maintaining stock p..

Oil cooler mounting kit by Mahle for 94-03 Ford 7.3L Powerstroke.Includes oil cooler seals and oil cooler adapter to block gasketsPart number: GS33680..

Direct replacement exhaust up pipe donut gasket for 94-03 Ford 7.3L Powerstroke by Mahle.Part number: GS33716..

Fits: 1994-2003 Ford 7.3L Powerstroke Use the Mahle fuel injector kit when installing injectors in your 1994-2003 Ford 7.3L Powerstroke. Mahle seals and gaskets are constructed from the highest quality materials and provide you with a factory-like fit and finish Mahle: GS33440..

Mahle piston with rings (.030) for 94-03 7.3L Powerstroke.Mahle original pistons are built from high quality materials and feature OE quality construction. Priced individually, only sold in full sets. Minimum quantity of 8. Features & Specs:Includes ringsNon coated skirtStandard Compre..