Turbos & Accessories

Kit to convert your stock turbo on your 2011-2014 Ford Powerstroke 6.7 to a 2015+ style turbo. This kit does not include turbo pedestal, oil feed line, or coolant feed line.2019 VGT turbo kit for the 2011-2014 6.7 Powerstroke. Replaces the factory SST turbocharger equipped on the 11-14 trucks. An up..

Performance Engineering Billet S466 With 2.6 smooth bore compressor wheel technology. The compressor wheel in this turbo has been meticulously designed for optimal flow and power. No expensed was spared in the design of this compressor wheel. Part Number: PES466..

Performance Engineering S467.7 with billet wheel. Includes a 1 year manufacturer defect warranty.Part Number: PES467.7..

When we are asked what are the weaknesses that should be addressed on the 6.7L Powerstrokes, there aren't many, but one thing high on the list is the factory plastic intercooler pipe.  And finally, someone has built a kit that addresses it, H&S Motorsports.  This kit is a direct replacement of the f..

Amplify your driving experience with a Fleece Performance Cheetah Turbocharger. Featuring a Fleece Performance exclusive 63mm FMW compressor wheel and a high flow turbine wheel; this turbo is capable of supporting 650HP, without sacrificing any drivability. Enjoy smooth and quick throttle respo..

MPD's in-house built intercooler piping kit. Tailor-made to work with either one of MPD's turbo kits or any other stock/stock-style 2015 turbocharger kits.  Includes:High-Flow Billet Y-Pipe Feeding the Manifolds Stainless Hot & Cold-Side Piping Includes High-Flow Intake Raw Finish (Call to o..

This kit allows you to replace the factory plastic (yes, plastic) intercooler pipe with a high quality bead-rolled stainless steel pipe.Fits all 2011 - 2016 Ford 6.7L Power Stroke **DIRECT REPLACEMENT, NO AFTERMARKET TUNING REQUIRED**H&S Motorsports is proud to introduce the Intercooler Pipe Upgrade..

Due to build time, please expect 1-2 weeks before product ships. MPD is proud to offer an affordable turbo kit to 6.7 customers that are looking for supreme street manners, low EGT's, and awesome power! This is not a "cheap replacement", but rather a comprehensive drop in turbo system that will do ..

Replace Your Factory Plastic Intercooler Piping with High-Quality Components That Offer Superior Reliability. Direct Replacement, no aftermarket tuning necessary. Not Legal for Sale in California..

The Turbosmart BOV controller is an electronic device which controls the pressure signal to the BOV. It works by detecting a negative voltage change in throttle position. It then energizes a solenoid to vent all of the air out of the BOV cap, causing a pressure differential between the piston of the..

Replace Your Factory Plastic Intercooler Piping with High-Quality Components That Offer Superior Reliability. Aftermarket ECM Tuning is REQUIRED Not Legal for Sale in California..

2011-2014 Ford Powerstroke 6.7LIntercooler Pipe Upgrade replaces the plastic factory Intercooler Pipe on your 2011-2014 6.7L Powerstroke. Known to fail on completely stock trucks, the weak factory plastic unit is easily replaced with this durable, bead-rolled stainless steel pipe with t-bolt clamps...

Updated turbo from Ford Motor co. They have revised required components to have a smaller failure rate over the original turbos built into the 6.7 Powerstrokes. 2 year, 24,000 mile warranty.  Pickup models only. Ford part number: BC3Z-6K682-C (Updated part number from BC3Z-6K682-A)..

H&S Motorsports is proud to introduce the SX-E Turbo Kit for the 2011 - 2016 6.7L Power Stroke diesel. This kit is designed to replace the factory turbocharger, exhaust manifolds, intake piping, and charged air piping with H&S Motorsports quality parts.TurbochargerWe have performed extensive testing..

Factory OEM Ford V-Band Clamp. For 2015 to 2017 6.7L Powerstroke diesel's. Ford Motor Company part number: FC3Z8287AStamping number- FC3Q-6C840-BA (FC3Q6C840BA, R070A)  ..

PLEASE CALL FOR AVAILIBLITY (UDPATED 05/20/2019) Ford Motor Company OEM Turbocharger. For 2011-2015 6.7L Powerstroke Diesel Cab & Chassis only. Ford part number: BC3Z-6K682-B (BC3Z6K682B) Core of $250 applies...

Ford Motor Company OEM Turbocharger. For 2015-2016 6.7L Powerstroke Diesel pickup models only. Ford part number: FC3Z-6K682-A (FC3Z6K682A) Core of $250 applies.**Photo for presentation only**..

6.7L Powerstroke Hot and Cold Side Tubes w/Couplings and Clamps KitFeatures:Outflows stock intercooler tubes by up to 32% Increases horsepower and torque: 8Hp & 21Tq Replacement tubes for both hot and cold side of the intercooler Constructed out of 3" mandrel-bent aluminum tubing Powder-..

Wicked Wheel® 2 for the 2011-2014 Ford 6.7LGreatly improves throttle response Increased Horsepower Lower EGTs Moderate installation - no modifications needed - approximate install time 6-8 hours. Increased boostThis does not fit the chassis-cab trucks.Special Note: This turbo has a reve..

Ford Motor Company OEM Turbocharger Actuator. For 2011-2015 6.7L Powerstroke Diesel pickup models only. Ford part number: BC3Z-6F089-A (BC3Z6F089A)..

Retrofit your 11-14 truck to accept 15+ style turbo. This kit does not include Turbo Pedestal, Oil feed line, or Coolant feed line. **DOES NOT INCLUDE TURBO** Part Number: NLF-RFIT-15...

Fits most all T4 externally wastegated turbine housings   Thermal Zero turbo blankets go above and beyond when it comes to heat tolerance and durability.  The inner layer of the turbo blanket can handle over 2500 degrees Fahrenheit of direct heat.  The blankets are made with high quality 1 inch th..

Performance Engineering S464 with standard cover and billet wheel. Includes a 1 year manufacturer defect warrenty. ..

The Alliant AP0167 Turbocharger Clamp Kit gives you all new V-Band Clamps when replacing or upgrading the turbocharger on your 2011-2014 Ford 6.7L Powerstroke. These OE replacement clamps are a direct fit for the old, worn factory clamps on your 2011-2014 6.7L Powerstroke. FEATURES: Direct Fit El..

Ford Motor Company OEM Turbocharger Actuator. For 2015-2019 6.7L Powerstroke Diesel pickup models only. Ford part number: FC3Z-6F089-A (FC3Z6F089A)Photo is for reference only, image may not be actual..

The MAHLE GS33692 Turbocharger Mounting Gasket Set gives you the seals necessary to reinstall the turbocharger on your 2011-2014 Ford 6.7L Powerstroke. MAHLE gaskets and seals are built to meet or exceed OE specifications providing you with a factory-like fit and finish.  This kit is for mounting a..

The Garrett 851824-5001S Stock Replacement Turbocharger is a drop-in replacement for your 2011-2014 Ford 6.7L Powerstroke. The Garrett Honeywell DualBoost Turbocharger was an industry first with several design innovations. Ball Bearing The low friction ball bearing system reduces mechanical loss, an..

The BD-Power 1045824 GT37 Turbocharger Retrofit Kit is a great way to replace the failure prone turbo in your 2011-2014 Ford F-250/350 or 2011-2016 Ford F-450/550. This kit includes a custom cast turbine housing, compressor cover, backing plate and pedestal to ensure installation of this require no ..

Universal Externally Wastegated T4 Lava Turbo Blanket.  Fits most all T4 turbo exhaust housings and some T5/T6.   Thermal Zero turbo blankets go above and beyond when it comes to heat tolerance and durability.  The inner layer of the turbo blanket can handle over 2500 degrees Fahrenheit of direct ..

Universal External Wastegated T3 Turbo Blanket.  Fits most all T3 turbo exhaust housings and some T4.   Thermal Zero turbo blankets go above and beyond when it comes to heat tolerance and durability.  The inner layer of the turbo blanket can handle over 2500 degrees Fahrenheit of direct heat.  The..

The Garrett 854572-5001S Stock Replacement Turbocharger is a drop-in replacement for your 2011-2014 Ford CAB & CHASSIS 6.7L Powerstroke. The Garrett Honeywell DualBoost Turbocharger was an industry first with several design innovations. Ball Bearing The low friction ball bearing system reduces mech..

Universal Externally Wastegated T3 Lava Turbo Blanket.  Fits most all T3 turbo exhaust housings and some T4.   Thermal Zero turbo blankets go above and beyond when it comes to heat tolerance and durability.  The inner layer of the turbo blanket can handle over 2500 degrees Fahrenheit of direct hea..

Replace a common failure point in your 2011-2016 Ford 6.7L Powerstroke to increase long term reliability with the XDP 6.7L Intercooler Pipe Upgrade (OEM Replacement) XD305. The XD305 replaces your factory plastic intercooler pipe with a mandrel-bent, bead rolled 3" steel pipe for extreme durability...

Universal Externally Wastegated T6 Lava Turbo Blanket.  Fits most all T6 turbo exhaust housings including most all Marine applications of Detroit Diesel turbochargers.  For Borg Warner T6 S400 series housings please see part number TZ328511-L. Thermal Zero turbo blankets go above and beyond when it..

The Ford BC3Z-6L612-A Pedestal To Turbo Installation Kit includes the necessary components to re-install the turbocharger to the pedestal in your 2011-2016 Ford 6.7L Powerstroke. This OE replacement gasket kit features a high quality construction and is a direct replacement for the factory seals. F..

Universal T6 turbo blanket.  Fits most all T6 turbo exhaust housings including most all Marine applications and Detroit Diesel turbochargers.  For most Borg Warner T6 S400 series please see part number TZ328511.   Thermal Zero turbo blankets go above and beyond when it comes to heat tolerance and ..