2011-2016 Ford 6.7L Powerstroke Engine Parts

14 Week Lead Time! Contact to Confirm!DFC engines may take up to 14 weeks to ship. Please contact us to verify lead times if you are in a hurry, before purchasing.  Built for work trucks, daily drivers and the diesel enthusiast in mind these engines are a vast improvement from stock as th..

OEM Ford engine oil cooler gasket for 11-19 Ford 6.7L Powerstroke.FitmentYearMakeModelBody & TrimEngine & Transmission2019FordF-250 Super DutyKing Ranch, Lariat, Limited, Platinum, XL, XLT6.7L V8 - Diesel2019FordF-350 Super DutyKing Ranch, Lariat, Limited, Platinum, XL, XLT6.7L V8 - Diesel20..

Gator Fasteners Heavy Duty Head Studs are design to hold up to the pressure of your 6.7L whether you're building a tow rig, race truck or just a daily driver. These studs have a much higher strength and will not stretch like the factory bolts will. The Gator Fasteners Performance Head Studs are..

The Mishimoto MMODP-1415B Magnetic Oil Drain Plug for your 2001-2016 GM 6.6L Duramax and 2012-2016 Ford 6.7L Powerstroke Engine is designed to remove metal fragments in engine oil, thus extending and protecting the life of your engine.These oil drain plugs are constructed from billet 6061 aluminum w..

2011+ FORD 6.7L POWER STROKE DIESEL PUSHRODSDue to the overall length of the Stock 5/16 diameter pushrods being almost 10 inches, we feel the strength of the OEM pushrods are not adequate for anything other than a stock vehicle. When the stress on the pushrod surpasses what is considered a reasonabl..

Fits: 2011-2014 Ford F-250/350/450/550 6.7L Powerstroke (With Heavy Duty Alternator)Over time, your stock balancer can wear out, causing vibration and possible major engine damage. Replace your old damper with one of these Dorman harmonic balancers. Part of their OE Solutions line, these balancers b..

The Ford BC3Z-9P455-B EGR Cooler Gasket Kit will help with the replacement of your cracked or leaking EGR cooler in your 2011-2014 Ford 6.7L Powerstroke. This EGR cooler gasket kit is the same kit used by an authorized Ford dealer to service your truck and is constructed to the same high-quality sta..

Fits: 2011-2014 Ford 6.7L Powerstroke Leaks in the exhaust manifold produce bad exhaust valves, a loss of power, and increased fuel consumption. Mahle Original exhaust gaskets require metal beads where the gas passes through at very high temperatures and low pressure. These metal beads are rein..

Backordered with No ETA  **Updated on 09/22/2023**Fits: 2011-2014 Ford 6.7L Powerstroke Get a tight seal when you install the MAHLE HS54887 Head Set to your 2011-2014 Ford 6.7L Powerstroke. A stock replacement, the Head Set is made to factory specifications. The Head Set is a complete set..

Fits: 2011-2014 Ford 6.7L Powerstroke MAHLE Original offers a choice of cylinder head gaskets to fit your project with the most effective, leak-free seal. Because vehicles and performance levels are as different as the people who drive them, a head gasket that works for you may not work for ano..

Mahle piston (.50mm) w/ rings for 11-15 Ford 6.7L PowerstrokeRings includedSold as a set only. Priced per piece.Mahle: 224-3852WR-0.50MM..

Bulletproof your engine build on your 2011-2016 Ford 6.7L Powerstroke with the Wagler CRF6.7 Connecting Rod Set. Proudly made in the USA, Wagler Competition Products 6.7L Connecting Rods are forged by Trenton Forging in Trenton, Michigan with the forging made from 4340ACQ certified material. The upd..

Fits: 2011-2016 Ford 6.7L Powerstroke Clevite H-Series main bearings were developed primarily for NASCAR racing, but are well suited to other types of competition engines as well. They're especially good for engines that run at medium-to-high revs. They have steel backings with carefully select..

Fits: 2011-2016 Ford Powerstroke 6.7L Powerstroke (.001" Extra Oil Clearance) Designed for competition applications, the Clevite MS-2334HX H-Series Main Bearing Set (.001" Extra Oil Clearance) is quality addition to your 2011-2016 Ford 6.7L Powerstroke. The H-Series bearings have enlarged chamf..

Fits: 11-16 Ford 6.7L Powerstroke Reseal the vacuum pump in your 2011-2016 Ford 6.7L Powerstroke with the MAHLE B32630 Vacuum Pump Gasket. MAHLE OE Gaskets and Seals are built to meet or exceed OE specifications so they perform, fit, and function just like the original.  FEATURES:Vacu..

Replace your damaged cylinder head and upgrade the valve springs on your 2011-2016 Ford 6.7L Powerstroke with the Powerstroke Products Loaded 6.7L Cylinder Head With HD Springs (Left) PP-6.7FHhdvsleft. This loaded cylinder head is assembled with the Powerstroke Products heavy-duty valve springs and ..

Don’t just machine the old heads in your 2011-2016 Ford 6.7L Powerstroke, replace them with the Powerstroke Products Loaded 6.7L Cylinder Head With HD Springs (Right) PP-6.7FHhdvsRight. This Powerstroke Products Cylinder Head is assembled with heavy-duty valve springs to give you control of the valv..

Replace the old cylinder heads on your 2011-2016 Ford 6.7L Powerstroke with the Powerstroke Products Loaded Stock 6.7L Cylinder Head (Right) PP-6.7FHOEMRight. This loaded cylinder head comes ready to install complete with valves, springs, and seals. Powerstroke Products cylinder heads start off as a..

The Powerstroke Products Loaded O-Ring 6.7L Head With HD Springs (Right) PP-6.7FHhdvsLeft-O is perfect for your 2011-2016 Ford 6.7L Powerstroke performance build. Using this loaded o-ringed head now gives you room to grown down the road. Whether you’re looking for reliability, or all-out power, this..

The Powerstroke Products Loaded O-Ring 6.7L Head With HD Springs (Left) PP-6.7FHhdvsLeft-O is perfect for your 2011-2016 Ford 6.7L Powerstroke performance build. Using this loaded o-ringed head now gives you room to grown down the road. Whether you’re looking for reliability, or all-out power, this ..

Don’t use questionable parts on the buildup of your 2011-2016 Ford 6.7L Powerstroke. Replace your damaged cylinder heads with the Powerstroke Products Loaded Stock 6.7L Cylinder Head (Left) PP-6.7FHOEMLeft. This loaded cylinder head comes complete with valves, springs, and seals and is ready for ins..

The XDP Powerstroke WIF (Water In Fuel) Aluminum Drain Plug XD346 is a much more durable replacement for the brittle factory plastic drain plug on your 2011-2016 Ford 6.7L Powerstroke. Over time, routine fuel filter changes can begin to weaken the OE drain plug located on the lower filter housing, l..

Backordered with No ETA   **Updated on 09/22/2023**Fits: 2011-2017 Ford 6.7L Powerstroke Designed to meet OEM specifications, the Camshaft Bearing Set provides you with a factory performance. Made to meet factory standards, the Camshaft Bearing Set is a direct stock replacement. ..

Fits: 2011-2017 Ford 6.7L Powerstroke Mahle Original piston ring sets are designed to be installer-friendly. They are pre-lapped to seat immediately, virtually eliminating break-in time. Ring materials and coatings, as well as ring tension, are all optimized for reduced friction and extended li..

Fits: 2011-2017 Ford 6.7L Powerstroke Mahle Original piston ring sets are designed to be installer-friendly. They are pre-lapped to seat immediately, virtually eliminating break-in time. Ring materials and coatings, as well as ring tension, are all optimized for reduced friction and extended li..

Fits: 2011-2018 Ford 6.7L Powerstroke (.001" Extra Oil Clearance)Crafted using advanced technology, the Clevite CB-1953HX H-Series Rod Bearing (.001" Extra Oil Clearance) is a high quality rod bearing for your 2011-2018 Ford 6.7L Powerstroke. Crafted from quality materials, the H-Series Rod Bearing ..

Fits: 2011-2018 Ford 6.7L Powerstroke The premium grade H-Series Rod Bearing (Standard) is a high quality replacement to the factory rod bearings. Crafted from quality materials, the H-Series Rod BEaring is designed for high performance applications. The H-Series Rod Bearing is made using advan..

Fits: 2011-2018 Ford F-250/350/450/550 6.7L PowerstrokeWhen the seals fail between an upper coolant tee and radiator hose, there typically hasn't been a fix besides buying a whole new coolant tee. This Dorman OE FIX kit offers a cost effective direct replacement of worn O-rings.Features: Instal..

This diesel exhaust fluid (DEF) filler cap is designed to match the fit and function of the original cap on specified vehicles, and is engineered for durability and reliable performance.Direct replacement - this diesel exhaust fluid (DEF) filler cap is designed to match the fit and function of the o..

Fits: 2011-2018 Ford 6.7L PowerstrokeReplace your worn-out or damaged oil cooler lines with Dorman replacement components. From their OE Solutions group, these oil cooler lines are application-specific, so you can be sure that you're getting the right part for the job.Dorman 625-503..

Fits: 2011-2018 Ford 6.7L PowerstrokeThere is no need to replace the entire radiator hose assembly. This O-ring kit will allow you to replace the torn or broken O-ring instead of the whole hose assembly saving you time, money and frustration. Features:Direct Fit Precisely Engineered S..

Fits: 2011-2018 Ford 6.7L Powerstroke Using only three parts (a laser-welded sealed housing, an internal inertia ring, and highly viscous silicone fluid between the two), SFI-approved Fluidampr harmonic dampers can control all crankshaft vibration--not just a limited frequency range. As a resul..

Backordered with No ETA   **Updated on 09/14/2023**Fits: 2011-2018  Ford 6.7L Powerstroke This Intake Valve is an excellent replacement for the burnt up intake valve in your cylinder head. This OE quality intake Valve is a direct fit replacement and is manufactured out of high-q..

Fits: 2011-2018 Ford 6.7L Powerstroke     Clevite thrust bearings are made of Copper, lead, tin on a steel back and offer better alignment of the bearing surface to the crankshaft surface promoting a wider and more uniform contact because they are independent of the journal beari..

Fits: 2011-2018 Ford 6.7L Powerstroke The PurePower 7816-PP Fuel Injector Hold Down Bolt Kit is a direct fit replacement for the original hold down bolts on your engine. PurePower Technologies® is a leader in precision engineering and remanufacturing of air and fuel management components for OE..

This direct replacement oil cooler matches the fit and function of the original equipment oil cooler for a reliable repair. This part has undergone extensive testing to ensure adherence to precise design standards.Direct replacement - this engine oil cooler is a precise match for the fit and functio..

Fits: 2011-2019 Ford 6.7L Powerstroke     Replace your worn-out or damaged oil cooler lines with Dorman replacement components. From their OE Solutions group, these oil cooler lines are application-specific, so you can be sure that you're getting the right part for the job.D..

This injector hold down bolt is made to securely hold down the injectors for 11-19 Ford 6.7L Powerstroke. Built to meet or exceed OE specs. Dtech: DT671007..

Fits: 2011-2019 Ford 6.7L PowerstrokeA common failure of the 6.7 Powerstroke is rod bearing failure due to inadequate oil supply pressure. HS Motorsports has determined the root cause of this and developed a rock solid solution that will ensure the long term integrity of your engine with this replac..

Fits: 2011-2019 Ford 6.7L Powerstroke The Mag-Hytec Diesel Engine Oil Pan is a great upgrade to the factory oil pan. Eliminate the plastic pan found in the earlier 6.7L models, or replace the steel pan on the later models. The larger design gives you an increased oil capacity allowing you to ho..

Fits: 2011-2019 Ford 6.7L Powerstroke The Engine Oil Cooler Mounting Kit gives you the gaskets needed to reseal the oil cooler.  MAHLE Gaskets & Seals are made from top quality materials to provide you with a factory-like fit and service life. Features:Quality Tested Engine O..

Fits: 2011-2019 Ford 6.7L PowerstrokeReseal your 2011-2019 Ford 6.7L Powerstroke engine with the MAHLE 54886 Cylinder Head Gasket. MAHLE gaskets and seals give you an OE form, fit and function provide you with performance that is as good, or better than the original. Choose MAHLE gaskets for a perfe..

Fits: 2011-2019 Ford 6.7L PowerstrokeReseal your 2011-2019 Ford 6.7L Powerstroke engine with the MAHLE 54887 Cylinder Head Gasket. MAHLE gaskets and seals give you an OE form, fit and function provide you with performance that is as good, or better than the original. Choose MAHLE gaskets for a perfe..

Fits: 2011-2019 Ford 6.7L PowerstrokeFor your next engine build, use Mahle Original intake manifold gaskets to seal your engine up tight! It's a known fact—proper sealing is vital to create maximum horsepower within the engine, and these gaskets will allow you to achieve a good, positive seal. They ..

Fits: 2011-2019 Ford 6.7L Powerstroke The Rear Main Seal Set is designed to reseal the rear main in your 2011-2019 Ford 6.7L Powerstroke. Built with high quality materials, you can rely on MAHLE OE to provide you with factory-like performance and a long service life. Features: Quality..

Fits: 2011-2019 Ford 6.7L Powerstroke Mahle Original timing cover seals meet or exceed the original equipment specifications providing the finest sealing products available. They come in a variety of materials to cover many different applications. Mahle Original provides world class sealing pro..

Fits: 2011-2019 Ford 6.7L PowerstrokeReseal the cooling system in your 2011-2019 Ford 6.7L Powerstroke with the MAHLE K32581 Water Pump Gasket. MAHLE OE gaskets and seals give you original equipment form, fit, and function, so they fit just like the original. MAHLE utilizes OE equivalent or better m..

Fits 2011-2019 Ford 6.7L Powerstroke*Replaces stock liquid-to-liquid cooler to reduce both coolant and oil tempsBar-and-plate cooler design for effective cooling and durability against road debrisStainless-steel braided -16 AN lines for improved flow and durability in even the harshest conditionsInc..