2008-2010 6.4L Powerstroke Intercoolers & Boots

Available in raw coating ready or polished, this intake elbow and CAC pipe is the longest radius from the intake manifold on the market.Made from high grade thick wall aluminum, you will see increased throttle response and slightly lower EGT's in the 30 to 50 degrees range of drop.Includes 2 silicon..

Stainless steel 6.4 Stock Replacement Hot Pipe Part numbers: 64RHP, 64BHP, 64PHP..

Fits: 2008-2010 Ford 6.4L Powerstroke The AFE Bladerunner Aluminum Hot & Cold Charge Pipe Kit are engineered to improve airflow for better cooling and more power in your 2008-2010 Ford 6.4L Powerstroke Flow & Preformance: This Bladerunner Charge Pipe Kit delivers smooth transi..

Fits: 2008-2010 Ford 6.4L PowerstrokeCNC Fabrication, LLC Upgraded 5 layer Inter-cooler hose and clamp kit for 08-10 6.4L Ford PowerstrokeFeatures:08-10 6.4L Charge Air Cooler Boot Kit With Clamps Black5 layer aramid reinforced silicone for high temp ratingRated to 180psiStainless Steel American mad..

Fits: 2008-2010 Ford 6.4L PowerstrokeCNC Fabrication, LLC Upgraded 5 layer Inter-cooler hose and clamp kit for 08-10 6.4L Ford PowerstrokeFeatures:08-10 6.4L Charge Air Cooler Boot Kit With Clamps Blue5 layer aramid reinforced silicone for high temp ratingRated to 180psiStainless Steel American made..

PRODUCT FEATURESDirect fit for the 6.4L Powerstroke3-in mandrel-bent, polished aluminum pipe eliminates restrictive bends2-piece design allows for easy removal and installationProvides improvement in airflow, power, and EGTsIncludes Mishimoto Silicone Boots with DuraCore technology and Mishimoto Con..

No Limit 6.4L Air To Air IntercoolerSelect with or without logoNo Limit Fab: 64IC..

Our 6.4 Intercooler Boot Kit Uses 6 ply High Temperature silicone. Improve quality and reliability with this kit.'No Limit Fab: 64CBS..

Intercooler Pipe Cold Side (Passenger Side Charge Pipe) 6.4L Ford Powerstroke F-250 and F350Sinister Diesel cold side intercooler pipe (passenger side charge pipe) fits 6.4L Ford Powerstroke F-250 and F-350. This upgrade replaces the factory smashed cold side intercooler pipe to allow more air flow ..

aFe introduces you to the BladeRunner intercooler outlet tube for your 2008-2010 Ford diesel Powerstroke with the V8-6.4L (td) engine. This passenger-side tube upgrade represents the next generation of diesel performance products by removing restriction that hinders flow. In recent testing this tube..

Nothing can put an end to a hill climb or quarter mile pass faster than a turbo hose that blows off. Now, you can eliminate this problem with BD's hose and clamp kits. The Nomex silicone hoses can withstand over 100 psi of boost, and are secured by rugged, spring-loaded, stainless steel T-bar clamps..

Lower AITs 21% 50% less pressure drop than stock Installs in 30 minutes All-aluminum cast end tanks Bar-and-plate core 18% thicker than stock 20% larger core volume than stock Reduces turbo stress and extends life Available in Sleek Silver or Stealth Black Mishimoto Lifetime Warranty Mis..

The kit includes the two boots that connect the intercooler pipes to the intake manifold and the two boots that connect the intercooler pipes to the intercooler. It includes four T-bolt spring clamps for the upper boots and 4 T-bolt spring clamps for the intercooler hoses. The spring bolt clamps are..

6.4L Ford Powerstroke replacement SPEARCO intercooler upgrade We have measured an average intake air temperature drop of 336.8 degrees on a load dyno using aftermarket injectors. At 37 PSI boost, we measured less than 1 PSI of pressure loss across the core. Max EGT's on a SuperFlow load dyno pul..

This brand new Bladerunner Intercooler represents the next generation of intercoolers.  The Bladerunner intercoolers utilize a 3.15"  bar and plate design that is 15% larger than the competitors and outflows OE style tube and fin core designs by 74%! This design results in quicke..

Upgrade Your 2008+ Powerstroke 6.4L Intercooler Pipe .   Features Mandrel bent from 3" 304SS (Polishable to mirror finish) The tube utilizes the correct inverted beads to use OEM boots and hardware. It has no kinks, crimps, or smashed sections. Includes three pre-welded 1/8" NP fitting..

Techni-Cooler dramatically increases the cooling capacity by balancing the richer fuel mixture with greater airflow and cooler, denser air. Denser air has more oxygen, which improves combustion as well as engine efficiency. Result: higher continuous power and more power at any exhaust gas temp (EGT)..

The CSF OEM+ Replacement Intercooler is manufactured from the highest quality components to provide you with the best aftermarket OE replacement intercooler available for your 2008-2010 Ford 6.4L Powerstroke. CSF is an ISO certified cooling system manufacturer with many OEM customers around the worl..

The Pusher 3" Passenger Side Intercooler Tube for the 2008-2010 6.4L Powerstroke trucks is an unobstructed passenger side charge tube that mates to the factory intake manifold or the smooth flowing Pusher intake manifold. Extensive design and testing has produced the best fitting and charge tube on ..

Rudy's Diesel Performance 3" Cold Side Intercooler Pipe for the 6.4L Powerstroke. Made from Aluminized Steel. Increases your throttle response and reduces EGT's. Optional Ceramic Coating.Rudy's Diesel part number: RDP-IC..

Direct fit for the 2008–2010 Ford 6.4L Powerstroke Mishimoto Lifetime Warranty Bar-and-plate construction with cast aluminum end tanks End tanks strategically designed for optimal airflow Mandrel-bent polished aluminum cold-side intercooler pipe Improves airflow, power, and EGTs Reduce pressur..

Mishimoto is proud to release a direct-fit silicone boot kit with DuraCore™ technology designed specifically for the 6.4L Ford Powerstroke. Mishimoto DuraCore™ technology is the synthetic material that comprises the innermost layer of all Mishimoto Silicone Diesel Boots. Compared to normal silicone,..

The CSF Heavy-Duty Intercooler is manufactured to provide durability and performance on your 2008-2010 Ford 6.4L Powerstroke. This heavy duty Intercooler is built using a bar and plate design with industry leading testing methods to maximize airflow and heat dissipation. These techniques allow CSF t..