2008-2010 6.4L Powerstroke Injector & Fuel System Parts

Ford 6.4L 08-10 Nozzle Set: 6 Hole 15 percent over, approximately 50hp over stock, capable of supporting up to 600-625 RWHP. Safe on a stock truck, great street manners and fuel economy.Sold as a matched set and includes set of copper washers.Note: Alignment pins commonly break when swapping nozzles..

Ford 6.4L 08-10 Injector Set: 100 percent over nozzles, enough fuel to support 925-1,000 RWHP with proper supporting modifications. Intended for off-road use only!Heavy fuel delivery and smoke output will require extensive custom tuning. Dual high pressure injection pumps are mandatory. In..

Ford 6.4L 08-10 Injector Set: 25 percent over nozzles, enough fuel to support 650-700 RWHP with proper supporting modifications.Intended for high performance use and light towing with modified turbos. Recommend modified or dual injection pumps and custom tuning to maximize performance. Can..

Ford 6.4L 08-10 Injector Set: 60 percent over nozzles, enough fuel to support 800-850 RWHP with proper supporting modifications. Intended for high performance use and extremely light towing with modified turbo or turbos.Recommend modified or dual injection pumps as well as custom tuning. U..

Ford 6.4L 08-10 Injector Set: Super Mental series injector set intended for 1,100 plus RWHP applications. Recommended for off-road use only!Heavy fuel delivery and smoke output will require extensive custom tuning. Dual high pressure injection pumps are mandatory.Built to spec based on int..

The perfect addon to maximize fuel delivery and customization when installing an aftermarket fuel system. Avoid the common quarter tank issues typically seen with the in-tank draw straws used with lift pumps such as Fass, Airdog and many others. Part numbers, SUMP, SUMPB..

If you're looking for a top-quality fuel contamination kit for your 6.4 Powerstroke 2008-2010, look no further than the Alliant AP64920. This kit meets or exceeds OE specs, making it a great choice for stock replacement. Plus, it's backed by a reputable manufacturer, so you can be sure it's built to..

The Alliant AP63645 Remanufactured High-Pressure Fuel Pump is a direct fit replacement for your 2008-2010 Ford 6.4L Powerstroke. This remanufactured pump does not included the installation kit and is rebuilt to the highest standards and thoroughly tested to ensure years of reliability. FEATURES..

Some Components on Backorder with No ETA   **Updated on 02/14/2023**Contact for Availability!The Alliant AP63643 Remanufactured High-Pressure Fuel Pump (HPFP) Kit for your 2008-2010 Ford 6.4L Powerstroke is a must have when replacing the HPFP. This kit includes a remanufactured high-press..

This is a Premium Replacement kit and carries a factory 1 Year warranty.• Brand New High Pressure Diesel Fuel Injector Pump Installation Kit• Includes Both High Pressure Fuel Pump To Common Rail Lines (1 Left & 1 Right)• Includes Required Seals, Gaskets, & HardwareAVP: 8C3Z-9G805-B..

Removes and installs fuel injector sleeve cupSaves time by eliminating need to remove headsServices 2008-2010 Ford 6.4L Powerstroke Diesel on F-250, F-350, F-450 & F-550 Also services 2008-2010 Maxxforce 7 Compare to Ford Factory Tools 303-1262 & 303-1263Part number: 3874..

Ford 6.4L 08-10 Nozzle Set: 6 Hole 30 percent over nozzle set, enough fuel to support 675-725 RWHP with proper supporting modifications. Intended for high performance use and very light towing with modified turbo or turbos. Also recommend modified or dual injection pumps and custom tuning to maximiz..

Ford 6.4L 08-10 Injector: Stock power level, sold individually with latest revisions. Includes new injection line.Details:Liter: 6.4Engine: PowerstrokeYears: 2008-2010Fuel Type: DieselCondition: NewNot For Sale In CaliforniaPart number: DDP 64NEW..

Ford 6.4L 08-10 PIN Set: Full Set of 16 nozzle alignment pins (2 pins per injector). When removing nozzle nut to replace nozzles, alignment pins will commonly shear off. Only sold as a complete set.Details:Liter: 6.4Engine: PowerstrokeYears: 2008-2010Fuel Type: DieselCondition: NewWarranty: 2 Year/U..

Ford 6.4L 08-10 Injector Set: 15 percent over nozzles, approximately 50hp over stock, capable of maximum 600-625 RWHP. Safe on a stock truck, great street manners and fuel economy.Includes injector line set. Sold as a balanced and matched set.Details:Liter: 6.4Rated HP - 625 HPEngine: Powe..

Features & Benefits:Diamond Advantage™ (DA) Diesel Fuel Injectors provide high-quality performance to efficiently and effectively deliver fuel into your engine, allowing for optimal precision. • Solenoid assembly is electrically tested to preemptively identify failure and prevent calibration dri..

Features & Benefits:Diamond Advantage™ (DA) Remanufactured Diesel Fuel Injection Pumps provide OE performance. • Assembled with OE components to ensure OE reliability and durability • Validated to OE calibration specifications using OE test equipment • 100% end-of-line tested to ensure out-of-th..

Replace the factory fuel line in your 2008-2010 Ford 6.4L Powerstroke with the DTech DT640007 Fuel Injector Line. DTech is known for a wide range of products for traditional diesel fuel injection systems and parts. The Injector Fuel Line is a direct-fit replacement and requires no modifications for ..

Make installing the high-pressure fuel pump in your 2008-2010 Ford 6.4L Powerstroke a breeze when you use the Ford 8C3Z-9G805-B High-Pressure Fuel Pump (HPFP) Installation Kit. This installation kit includes all the gaskets, O-rings and lines needed to install a new, remanufactured or your original ..

Industrial Injection 6.4L Power Stroke Piezo Injectors are manufactured to meet and exceed factory quality, reliability and efficiency.Replaces: 1875072C91, 8C3Z-9E527-DRM,AP64900All injectors are built with OE nozzles,control plungers and solenoids.Copper washer, o-ring and injection line are inclu..

Titan Fuel Like Extension Kit is sometimes required when installing a Titan Tank. On some models the existing fuel lines are approximately 6" too short. This kit extends the fuel lines a little over 6". Kit uses factory style connectors that click into place. Titan: 029902..

The XDP Remanufactured 6.4 Fuel Injector XD485 is a high-quality replacement for the malfunctioning injector in your 2008-2010 Ford 6.4L Powerstroke. With over 30 million fuel injectors on the road, you can be sure this component is constructed to meet or surpass the original manufacturers specifica..

Ford OEM Replacement for 2008-2010 6.4L Powerstrokes Part Number: 8C3Z-9N103-B..

Features:Top plate and housing CNC machined from billet high-strength Aluminum with black anodized finish, durable and rust-resistant; Four brass fittings, 2 pcs 1/2” NPT x 1/2" hose ID and 2 pcs 1/2" NPT x 5/8" hose ID.Dual-ports allow for integrated return line install or double fuel feeds for i..

The FASS PF-3001XL Extended Length Fuel Particulate Filter directly replaces the fuel filter on your FASS Titanium Series or Titanium Signature Series Fuel Systems. Featuring 144 Micron filtration, it's placement now on the suction side drastically reduces cavitation while increasing flow properties..

The FASS XWS-3002XL Extreme Series Extended Length Fuel/Water Separator replaces the water separator on your FASS Titanium Series or Titanium Signature Series Fuel Systems. Rated at 2 microns absolute, this redesigned water separator no longer has a drain due to the fact that the filter element..

Anodized billet aluminum Y-fitting with barbed ends for pushlock hose. Fleece Part Number: FPE-FIT-Y08-BLK..

The XDP Fuel Tank Sump XD182 is the perfect solution for those wanting to maximize fuel delivery to their engine. This One Hole Design Fuel Tank Sump is easier to install than others on the market, and it only requires one hole in your fuel tank!The XD182 provides an outlet for fuel on the bottom of..

The XDP Fuel Tank Sump with Built-In Fuel Return XD379 allows you to maximize your fuel delivery and gives you the option to customize your aftermarket fuel system. The XD379 features a one-hole design that only requires a single 3 inch hole for installation and helps prevent the 1/4 tank issues tha..

When installing a bottom sump with your AirDog or Fass Pump most trucks end up with an open fuel supply and or return line. G & R Diesel's 1/2" or 3/8" aluminum plug will cap off these lines with ease, to keep fuel from seeping out of them and dirt from getting into your fuel tank. You no longer hav..

Alliant Injection Line & O-Ring Kit OEM Part number: 8C3Z9229A Application: 08-10 Ford F-Series Alliant Part number: AP0027 These are the lines from the fuel rails to the injector only. Select (8) below if you need all these lines for your truck.  SEE SECOND IMAGE                            ..

Right or passenger side fuel injector harness. Also includes plug that connects to the rail pressure sensor. Ford part number: 8C3Z-9D930-AA..

One of the most critical parts of your truck is it's fuel system!  Do not just let your FASS or AirDog hang down from your frame and be exposed to road, tire, and field hazards!  We have created a completely new mounting system for your FASS or AirDog that compliments an already great fuel system. ..

Alliant Power new stock piezo fuel injector for the 2008-2010 Ford 6.4L Powerstroke Diesel Includes copper sealing washer, injection line, and all of the o-rings. 13 month unlimited mileage warranty applies. $150 core charge per injector applies. Customer is responsible for return shipping. Alli..

Fleetguard fuel filter kit, part number: FK48002 Includes both pictured filters. Crosses to Ford part numbers: Ford 8C3Z9N184A Ford 8C3Z9N184C..

Ford OE factory direct high pressure injection pump. Also known as a K16 pump. Ford part number: 8C3Z9A543DRM Cross Reference Numbers:8C3Z-9A543-DRM 8C3Z 9A543 DRM..

AirDog® II-4G *Replaces OE lift pump The next generation in the fuel delivery system. The AirDog 2-4G A6SABF494 Air/Fuel Separation System for your 2008-2010 Ford 6.4L Powerstroke Twin-Turbo Diesel is the next generation Airdog fuel delivery system, resulting in an efficient, long lasting and quie..

The XDP Push-Lock Fuel Pressure Tee XD200 is machined from aluminum with a pre-drilled & tapped 1/8" NPT port to accept a fuel pressure sender or hose. The 1/2 Push-Lock fitting makes it ideal for use with aftermarket fuel systems such as Airdog or FASS. Simply install this fitting in-line for a has..

Left or drivers side fuel injector harness. Ford part number: 8C3Z-9D930-BA..

Backordered with No ETA   **Updated on 03/14/2023**The Alliant High-Pressure Fuel Pump (HPFP) Installation Kit simplifies the installation of a High Pressure Fuel Pump on your 2008-2010 Ford 6.4L Powerstroke. This kit comes complete with the necessary gaskets and seals and components to i..

The XDP Fuel Tank Sump with Built-In Fuel Return XD243 provides you with a perfect option to maximize fuel delivery, and customization when installing your aftermarket fuel system. Avoid the common 1/4 tank issues associated with in-tank draw straws used with fuel systems such as AirDog, FASS and ma..

The EDE Fuel Bowl Delete allows for removal of the factory fuel bowl on top of the motor and allows fuel to be pumped directly to the high-pressure fuel pump with the least restriction. Removing the internal line restrictions allows as much fuel supply as possible to the High-Pressure Fuel Pump (HPF..

Ford OEM reman stock piezo fuel injector for the 2008-2010 Ford 6.4L Powerstroke Diesel Includes injection line, copper sealing washer, and all of the o-rings. 2 year unlimited mileage warranty applies. $180 core charge per injector applies. Customer is responsible for return shipping. Ford: 8C3..

Ford 6.4L Powerstroke Injection Line Ford Part #: 8C3Z9229A (8C3Z-9229-A) Application: 08-10 Ford F-Series 6.4L Powerstroke These are the lines from the fuel rails to the injector only. Select (8) if you need all these lines for your truck. See second image.                                    ..

We originally developed this wiring harness for use with the Fuelab fuel pump in our High Performance Fuel Delivery Kit. We have since modified the design to make it more "universal". It is configured specifically for use with the Ford Super Duty trucks, with the relay trigger being located where th..

Prevent cold weather gelling of your fuel system with BD's PTC Heating element. Sandwiched between the water separator, pre-filter and/or the filter head, the BD fuel heater is perfect for cold weather warriors. The premade wiring harness with sealed electrical connectors offer qiuck and easy instal..

An anodized fuel filter cap for your Ford 6.4L diesel! This cap comes in an assortment of colors and it works great with the factory fuel filter. Has an external port that can be blocked off (hardware provided) or allow you to easily access the engine fuel system in order to easily measure fuel pres..