2003-2007 Ford 6.0L HPOP Upgrade Parts

Fits: 2003-2004 6.0L Ford Powerstroke Outfitted with a new upgraded housing that cures the infamous "back plate wear-out" with the original design.  Typically, these pumps will support 190cc conventional or smaller (stock) injectors rather well.   Features: ..

Fits: 2003-2004 6.0L Ford Powerstroke Upgrade your 03-04 6.0L Powerstroke with this Stage 2 High Pressure Oil Pump from CNC Fabrication, LLC This is our mild performance pump and will outperform our Stage 1 pump by around 30% flow volume. Outfitted with a new upgraded housing that cures the in..

Brand New HPOP High Pressure Oil Pump Discharge Tube for 2003-2004 6.0L Power Stroke Diesel Engines with the Round HPOP.AVP: 3C3Z9T288AAFord: 3C3Z-9T288-AA..

Fits: 2003-2004 Ford 6.0L PowerstrokeBostech's High-Pressure Oil Pump - HPOP is a direct OEM replacement. Remanufactured and tested to OE specifications for maximum performance and efficiency. Backed by Bostech's 24-Month Unlimited Mileage Warranty! Superior quality at an affordable price.Bostech Re..

Fits: 2003-2007 Ford 6.0L PowerstrokeThis Kit includes the parts needed to install a new IPR Valve in your 2003-2007 Ford 6.0L PowerstrokeFeatures:IPR Valve Seal KitStock ReplacementAlliant: AP0035..

Looking for more power for those big oil hungry injectors?  Well this is what you need. This setup is proven to hold ICP for up to 500/400 8mm hybrids and make 1500hp.  Also works well with 430/200 7mm hybrids and big 300/200 conventional.This is a front mounted HPOP for the 6.0, runs off ..

Fits:  2003-2007 Ford 6.0L PowerstrokePrevent damaging debris from entering the high pressure oil system when you add the Mahle Oil Screen Cooler Screen. The Oil Cooler Screen is made to be an OEM replacement and maintains a factory ride. Application Note: Metal screen constructed wit..

Fits: 2004 Ford Powerstroke (Late Production)The Ford High Pressure Oil Pump (HPOP) is a genuine Ford direct OE replacement for your Powerstroke engine. This pump fits the 2004 late production models. Features: Genuine Ford Replacement Direct-Fit Replacement Includes Pump & O-Ring..

Bostech WH021104 Injection Control Pressure (ICP) Sensor for 2004-2010 Ford 6.0L Powerstrokes. The ICP sensor being faulty can cause surging & oil leaks. If you unplug your ICP sensor and notice engine oil in the plug, the sensor must be replaced. This item only fits 2004 trucks that have the IC..

Features & Benefits:Diamond Advantage™ (DA) Remanufactured Diesel Fuel Injection Pumps provide OE performance. • Assembled with OE components to ensure OE reliability and durability • Validated to OE calibration specifications using OE test equipment • 100% end-of-line tested to ensure out-of-th..

Fits: 2004.5-2007 Ford 6.0L Powerstroke Replace the gaskets and hardware when installing an HPOP with the Alliant High-Pressure Oil Pump Installation Kit. This kit features all the O-rings, gaskets and bolts needed to install an HPOP into your truck.Alliant AP0099..

Fits: 2004.5-2007 Ford 6.0L Powerstroke  Replaces the HPOP fitting in your 2004.5-2007 Ford 6.0L. This kit is designed to replace the problematic factory STC fitting that is known to crack and break, which can lead to stalling, hard starts and other issues.  Features:  STC..

Fits: 2004.5-2007 6.0L Powerstroke Replace the failing IPR with the Alliant Injection Pressure Regulator Valve. Note: With edge filterAlliant Power AP63417..

Bostech's High-Pressure Oil Pump - HPOP is a direct OEM replacement. Remanufactured and tested to OE specifications for maximum performance and efficiency. Backed by Bostech's 24-Month Unlimited Mileage Warranty! Superior quality at an affordable price. Bostech Remanufactured - Assembled ..

Fits: 2004.5-2007 Ford 6.0L Powerstroke Replace the failing IPR valve with the Bostech Remanufactured Injection Pressure Regulator (IPR) Valve. The IPR Valve regulates the pressure that is required to properly operate the injectors. Faulty IPR Valves often lead to a no-start or hard-start condi..

Fits: 2004.5-2007 Ford 6.0L Powerstroke The DTech Injection Pressure Regulator (IPR) Valve is remanufactured to DTech's stringent specifications to ensure function and reliability. DTech checks all assembly and key characteristics to make sure they meet all of DTech's specifications. Featu..

The XDP High Pressure Oil Rail Ball Tube Installation Tool XD226 is a worth addition to the toolbox of any 2003-2007 6.0L Powerstroke tech. This specially designed tool makes it easy to replace the ball tubes and seals in your high pressure oil rail.Features:For High Pressure Oil Rail Ball TubesAllo..

Upgrade the HPOP fitting in your 2004.5-2007 Ford 6.0L Powerstroke with the XDP STC HPOP Fitting Update Kit XD269. The factory Snap-To-Connect (STC) Fitting that connects to the High Pressure Oil Pump (HPOP) is known to leak and in some cases completely separate.These leaks commonly cause hard start..

RCD 2003 - 2010 4.5L & 6.0L Ford Power Stroke IPR Valve SocketHigh quality socket for hand use to R&R IPR valve.3/8' Drive, Works best with swivel head ratchet...

Bostech WH021105 Injection Control Pressure (ICP) Sensor for 2004-2010 Ford 6.0L Powerstrokes. The ICP sensor being faulty can cause surging & oil leaks. If you unplug your ICP sensor and notice engine oil in the plug, the sensor must be replaced. Replaces ICP Sensor13 Month Unlimited Milea..

Fits: 1994-1997 7.3L Ford Powerstroke This line is a replacement passenger side line for the '94.5 through '97. If you have e-fuel you can also use our SD passenger line for a cleaner install. All new Genuine Brennan™ fittings  DuPont Teflon lining just like OEM Burst pres..

HPOP Test Gauge 0-4000 PSI 94-03 7.3L and 03-07 6.0L Powerstroke Complete with 3 foot hose and rail adapters Allows proper diagnostics of the HPOP output at start-up and during driving test. Used for proper tuning of on a dyno. Not intended for long term monitoring of HPOP pressure...

THE DIFFERENCE IN THIS KIT AND THE INTERNATIONAL KIT- THIS KIT INCLUDES THE ALIGNMENT BRACKET, BUT HAS LESS O-RINGS & GASKETS.  The Ford 6.0 STC HPOP Fitting Update Kit 4C3Z-9B246-F is a New One-Piece High Pressure Oil Connector The installation of the Ford 6.0 STC HPOP Fitting Update Kit..

THE DIFFERENCE IN THIS KIT AND THE FORD KIT- THIS KIT DOES NOT HAVE THE ALIGNMENT BRACKET, BUT IT DOES INCLUDE EXTRA O-RINGS & GASKETS. The Ford 6.0 STC HPOP Fitting Update Kit 1879930C93 is a New One-Piece High Pressure Oil Connector The installation of the Ford 6.0 STC HPOP Fitting Update Kit 1..

High Pressure Oil Pump Cover Gasket Ford: 3C3Z6619EA..

6.0L Ford Power Stroke Thumper I HPOP2005 - 2010 6.0L Supports up to a 225MM conventional injector."RCD High Pressure Oil Pumps (HPOP's) offer the highest displacement in the industry. They are remanufactured with all new check valves, heads and shafts to ensure long lasting performance. We will not..

The Bostech ISK811 HPOP Branch Tube Assembly O-Ring Repair Kit for the 03-04 Ford 6.0L Powerstroke Diesel repairs the leaking hard-pipe that connects to the High Pressure Oil Pump.This item is not available from Ford.Fits models built before 9-23-03. Please examine the pictures closely to better und..

24 MONTH UNLIMITED WARRANTY Our pump has been rock solid and we're proud to now offer a full 24 month unlimited warranty. This warranty covers anything short of abuse, tampering and obvious physical damage. Warranties are VOID on any pump that has been tampered with.   ADRENALINE PUMP&n..

Ford OEM reman HPOP for the 2003-2004 Ford 6.0L Powerstroke Diesel. 2004 truck owners, it will be extremely helpful if you can include the last 8 digits of your VIN in the comments so we can get you the right pump. 2 Year unlimited mileage warranty applies. $250 Core Charge Applies.***The core cha..

This is a factory replacement Ford HPOP for the 2004.5-2007 Ford 6.0L Powerstroke2004 truck owners, it will be extremely helpful if you can include the last 8 digits of your VIN in the comments so we can get you the right pump.  ***The core charge will be refunded once we have received the cor..

Branch Tube,  fits 04.5-07 6.0L Powerstroke Ford# 5C3Z9J332C..

Backordered with No ETA   **Updated on 09/05/2024** Engineered to Last Heavy Duty High Pressure Oil Pump for the 2005-2007 6.0L Powerstroke Designed for demanding conditions Improved Performance at Affordable Pricing Eliminates power loss from the lack of injecti..

6.0L Ford Power Stroke 2005-2010 Thumper II HPOPThis pump is internally ported, modified for cam clearance and a new high displacement cam is installed. These pumps support up to a 300mm conventional injector."RCD High Pressure Oil Pumps (HPOP's) offer the highest displacement in the industry. They ..

2003-07 6.0L Ford Super Duty High Pressure Oil Tube/Injector Rail Plug OE# W302908 Dorman part number: 904-231..

Reman Bosch HPOP for the 2003-2004 Ford 6.0L Powerstroke Diesel. 2004 truck owners, it will be extremely helpful if you can include the last 8 digits of your VIN in the comments so we can get you the right pump. 1 Year unlimited mileage warranty applies. $150 Core Charge Applies.***The core charge..

6.0L  High Pressure Oil Pump (Early) 2003-2004(Remanufactured)   Acceptable injector core must be returned within 60 days.   Applications: 2003-2004 F Series, Excursion, VT365 . OEM part #3C3Z9A543AARMPart number: AP63625 Superseded part number: DT60HPP1 Ground orders, Pl..

Alliant Power AP63661 Remanufactured High-Pressure Oil Pump. Each pump is remanufactured in house and bench tested to ensure proper operation. This kit includes all necessary gaskets and hardware for installation.OEM Part#: 5C4Z9A5A43A, 5C4Z9A453B, 5C3Z9A543C, 5C3Z9A543ARMApplication:04.5-07 Ford F-..

While testing our high pressure oil pumps, we've found that the 6.0L pumps were capable of more output that was being limited by a poor delivery system. We've created a new system that will allow even a stock pump to realize more output. But, if you're installing a larger volume hpop - like our..

NOW FOR ALL MODEL YEARS 1994-2003!  CHOOSE YOUR OPTION WHEN ADDING TO CART. The Powerstroke uses high pressure oil to activate the injectors. At start-up, the high pressure pump (HPOP) draws oil from the reservoir to start the engine, and the low pressure pump is refilling the reservoir..

These hoses connect the standpipes to the high pressure oil rails, and ONLY fit engines with the early style round high pressure oil rails (ICP sensor at rear of engine under turbo). If your already replacing other parts of the high pressure oil system (ie: Stand Pipes or HPOP), it highly recommende..