Alliant Power Fuel System Contamination Kit for 2017-2019 Ford 6.7L PowerStroke Engines Equivalent to Ford OE# HC3Z-9B246-B /HC3Z-9B246-ADid your Ford F-Series truck develop a P0087 (Fuel Rail Pressure Low) code. Did your pump receive little to no fuel leading to a lack of lubrication en..
Fits: 2011-2018 Ford 6.7L Powerstroke The Mahle Fuel Rail Supply Line for your 2011-2018 Ford 6.7L Powerstroke is a direct fit replacement for your factory component. Mahle head sets give you original equipment form, fit and function, so they fit just the original! Mahle utilizes OE equiv..
Fits: 2011-2018 Ford 6.7L PowerstrokeReplace the old factory injector lines in your truck with the PurePower Injector Line. Over time, these lines can become contaminated with corrosion and other debris that can cause damage on the injectors. These injector lines require no modifications for a simpl..
Fits: 2011-2018 Ford 6.7L PowerstrokeSwap out the old fuel injector lines in your vehicle with the PurePower Fuel Injector Line. Each Injector meets or exceeds all OE specifications and is created using the highest quality materials. As the lines age they can become damaged or corroded d..
Fits: 2011-2019 Ford 6.7L Powerstroke
This Dorman 800-890 Fuel Feed Line (Pump To Rail) is the perfect component for your truck. This Fuel Line is Quality Tested after every build, has durable materials and is a direct fit replacement .
Dorman: 800-890..
The disaster prevention kit helps prevent well known failures in the factory CP4 pumps. The best piece of mind possible is knowing your maintaining your truck while preventing large failures that could cost the upwards of $15000 in repairs alone!
Part numbers: 67CP4BPK1114, 67CP4BPK151..
2011 - 2019 6.7L Ford Power Stroke Contamination (Disaster) Kit
Stage I
• Bosch/RCD CPX
• Genuine Bosch Injectors
• New Injector Lines & Hold Down Bolts
Stage II
• Bosch/RCD CPX
• Genuine Bosch Injectors
• New Injector Lines & Hold ..
Features:More durable plug-and-play replacement for the CP4Does not require any ECU calibrationOE fit and functionTwo-piston DCR pump co-developed by S&S/PurePowerBiofuel and low-lubricity fuel compatiblePatented Eccentric Drive pumping technologyPressure-lubricated cam and bushingsCorrosion-res..
The XDP OER Series New Fuel Rail Assembly (Driver Side) XD603 will replace the contaminated rail in your 2011-2019 Ford 6.7L Powerstroke. The failure-prone CP4 is known to send debris throughout the entire fuel system, including the fuel rails.
Like all XDP OER Series components, this unit is bui..
The XDP OER Series New Fuel Rail Assembly (Passenger Side) XD604 will replace the contaminated unit in your 2011-2019 Ford 6.7L Powerstroke. The CP4 fuel pump in this truck is known to fail, and the debris from the failure can contaminate the entire fuel system, including the fuel rails.
Like all..
Looking to replace your fuel injection lines on your 6.7L Powerstroke? Look no further than this injection line kit from PurePower Performance. Many people experience issues with either a damaged line or corrosion. PurePower performance injection lines are a high quality direct fit replacement ..
Exclusive kit that traps ~99.99 % of all debris, with our patented 74 micron screen filter. Disaster Prevention Kit ( CP4 Bypass Kit )As many 6.7L Powerstroke owners have become painfully aware, the high pressure fuel pump (also known as a CP4 pump) has a design weakness. When the CP4 pump..
RCD 6.7L Power Stroke Billet Injector Hold Fork Down KitOEM TTY injector hold downs are prone to fail in stock applications and are almost promised to break when you are making power.• 4140 Heat Treated Billet Steel• Full Set of 8• 170,000 PSI Hold Down Bolts • Special Hold Down Cup WasherOEM #..
All New Fleece Performance Fuel Filter Bypass for the under hood filter assembly on the Ford F250/350/450/550 6.7L Powerstroke! If you are running an aftermarket lift pump or auxilliary fuel filtration and are looking for the cleanest manner to eliminate the crack prone under hood filter, this Fuel ..
This kit includes all the high pressure fuel components that need to be replaced in the event of fuel contamination using all OE parts. Kit comes complete with injectors, injection pump, injector lines, and fuel delivery lines that MUST be replaced in the unfortunate event of fuel contamination in y..
Get the XDP 6.7L Powerstroke Fuel Contamination Kit XD516 and repair the fuel system in your 2017-2019 Ford 6.7L Powerstroke after a failed CP4 pump.
When the CP4 pump fails in your 6.7L Powerstroke, internal pump debris is often pushed through the fuel system on your engine. As a result, this de..
Fits: 2017-2019 Ford F-250/350/450/550 6.7L Powerstroke
This Ford HC3Z-9B337-B Fuel Pipe is the perfect component for your truck when you have a leaking unit. This Fuel pipe is quality tested after each build and is a drop down replacement making it an easy install.
Ford: HC3Z-9B337..
Fits: 2017-2019 Ford F-250/350/450/550 6.7L Powerstroke
This Ford HC3Z-9A274-A Tube Assembly is the perfect component for your truck if you have a leaking unit. Each Tube Assembly is quality tested and is a direct replacement for an easy install.
Ford: HC3Z-9A274-A..
The XDP Billet Aluminum Fuel Drain Valve XD415 is the perfect solution for replacing the problematic drain valve in your 2017-2020 Ford 6.7L Powerstroke. Over time, the factory equipped plastic water separator drain valve can become brittle and possibly crack or break leaving you stranded!The XDP Bi..
S&S Diesel Motorsport, the creator of the original Disaster Prevention Kit for the 6.7 Power Stroke, is at it again with a much-improved second generation kit. Since its debut in 2016, the original S&S 6.7L Power Stroke CP4 Bypass Kit (Disaster Prevention Kit) has safeguarded thous..
Replacement fuel filter adapter fitting with M16x1.5 thread. For use with our under hood filter base (FPE-FMC-UHFA-1123) on 2011-2024 Ford 6.7L trucks.
Fleece Performance: FPE-FF-M16-ADPT..
The SPE Motorsport Injector Return Repair Kit is designed as an upgrade for the problematic, brittle return line nipple on factory trucks.
BENEFITS:
Simple, easy install
Billet aluminum, black anodized design
Earlier model years (11-16) includes a reference port for diagnostic use..
Build Dates: 7/11/2016-11/04/2019
F250, F350, F450, F550, Chassis Cab, Narrow Frame
Ford 6.7L Power Stroke Disaster Kit. This kit includes all parts necessary to repair your 2016-2020 6.7L Ford Power Stroke in the event of a major fuel system failure. This kit includes OEM and Bosch replacemen..
Please note- Availability is rapidly changing on this item, please contact us to confirm we have this in stock before ordering. Kit is used to properly service the entire engine fuel system, that contains everything that is to be replaced in cases of contamination. Comes with all injectors, ste..
Backordered Until 01/2025 (Updated 11/11/24)
Fuel Sump
Features:
• 1/2" NPT Outlet Port
• 1/2" NPT Return Port With Stand Tube
• Fully Functional Water Separator Sump
• Does not require removal of fuel tank
• Made in USA
RCD: RCD-..
The XDP Push-Lock Fuel Pressure Tee XD200 is machined from aluminum with a pre-drilled & tapped 1/8" NPT port to accept a fuel pressure sender or hose. The 1/2 Push-Lock fitting makes it ideal for use with aftermarket fuel systems such as Airdog or FASS. Simply install this fitting in-line ..
Fits: 2011-2019 Ford 6.7L PowerstrokeThis Ford OEM Upgraded Fuel Injector Bolt For a 2011-2019 6.7L Powerstroke is an OEM replacement that maintains factory fit and performance. Each piece on it constructed from quality materials to give you the best durability and a long lasting performance. F..
Fits: 2011-2021 Ford 6.7L Powerstroke One of the most common issues on all 6.7 Powerstroke engines is failure of the CP4 fuel injection pump. In recent years a CP4 Bypass Kit was developed then directly copied by multiple other companies within the diesel industry. After installing some of thes..
When installing a bottom sump with your AirDog or Fass Pump most trucks end up with an open fuel supply and or return line. G & R Diesel's 1/2" or 3/8" aluminum plug will cap off these lines with ease, to keep fuel from seeping out of them and dirt from getting into your fuel tank. You no longer hav..
Boch OE Stock Inlet Metering Valve 6.7 Ford Scorpion 2011-2019 (FCA/MPROP)Also known as an injection pump inlet metering valve. Made by Bosch, the original equipment manufacturer.
Bosch Part Number: 1462C00998..
Bosch Replacement left hand {driver's side) fuel injection rail for 2011-2019 Ford 6.7L Powerstroke.Comes with fuel rail pressure sensor and fuel pressure limiting valve
Bosch part number: 0445218017Replaces Ford: BC3Z9D280B..
Bosch Replacement right hand {passenger side) fuel injection rail for 2011-2019 Ford 6.7L Powerstroke.Bosch part number: 0445218015Replaces Ford: BC3Z9D280A..
The Alliant AP0088 Injection Line & O-Ring Kit is a direct replacement for your 2011-2015 Ford 6.7L Powerstroke. Alliant Power provides OEM quality, without the OEM price. Keeping Original Equipment Manufacturer (OEM) product as the preferred service part so vehicles and equipment continue to perfor..
The Alliant AP0087 Injection Line & O-Ring Kit is a direct replacement for your 2011-2015 Ford 6.7L Powerstroke. Alliant Power provides OEM quality, without the OEM price. Keeping Original Equipment Manufacturer (OEM) product as the preferred service part so vehicles and equipment continue to perfor..
Image for representation only.
Ford Motor Company designs and produces OEM parts that meet the same specifications and tolerances as the parts on the vehicle when it was manufactured. These parts meet stringent requirements for fit, finish, structural integrity, corrosion protection and dent resi..
Discontinued (8/28/23)Safeguard the fuel system in your 2015-2016 Ford with the XDP 6.7L Powerstroke CP4 Bypass Kit XD282. It is a known issue that the factory-equipped CP4 pump does not last. When that pump does fail, the damaged internals contaminate the fuel used to lubricate the pump.This contam..
DISCONTINUEDCheck out this alternative:https://puredieselpower.com/ford/6.7l-powerstroke/fuel-upgrades/s-and-s-diesel-gen2.1-cp4.2-bypass-kitKeeps injectors/rails safe from CP4 pump failure debrisThe original 6.7 Power Stroke CP4.2 bypass kit50state CARB-compliant (EO number D-756-1)100% Made in ..
Discontinued (Updated 9/11/2024)
SPE 6.7 Powerstroke Disaster Prevention Kit + Exofilter
The “Disaster Prevention Kit,” it does exactly what it implies; it prevents the disasters of a CP4 pump failure from destroying the rest of a very expensive high-pressure fuel system. While thi..