No Limit Fabrication 67THBK Hot Side Boot Kit - 2011-2026 6.7L Powerstroke

The No Limit Fabrication 67BB 6.7 Power Stroke Boost Bundle Kit replaces the factory charge air piping on 2011-2026 Ford F-250, F-350, F-450, and F-550 Super Duty trucks with 3" aluminum hot side and cold side pipes, silicone boots, and stainless T-bolt clamps in one kit. Available in Raw, Polished, and Black finishes - and custom Prismatic colors with a color code entered at checkout. Tuning is required after installation; this kit is not intended for trucks running only a stock tune. Select your finish and model year at checkout.

Why the 67BB Is a Tuned-Truck Upgrade

The 67BB Boost Bundle Kit bundles the No Limit Fabrication 3" hot side and 3" cold side charge air pipes into a single kit for the 6.7L Powerstroke Super Duty. Replacing factory plastic and crimped factory piping with 3" aluminum pipe and sealed silicone boots removes the restriction and leak points in the charge air circuit on both sides. The kit includes high-quality silicone boots and stainless T-bolt clamps throughout, so both circuits are covered with one order.

The tuning requirement is not optional. The 67BB replaces charge air piping in a way that changes how the engine's air delivery system behaves under boost - a stock tune cannot properly manage the change and the truck will not run correctly without a tune calibrated for the new configuration. If your truck already runs aftermarket tuning, verify your tuner supports this piping configuration and select your finish to proceed. If you are still on a stock tune, get tuning sorted before this kit ships.

67BB vs Buying Hot Side and Cold Side Separately

The No Limit Fabrication 3" hot side and 3" cold side kits are also sold individually. The 67BB combines both into one order at a lower combined price than sourcing them separately. If your charge air piping on only one side needs replacing - or if you already have one side covered with aftermarket pipe - order the individual kit that fits your situation. If you are starting fresh and replacing the full charge air circuit, the 67BB covers both sides with one purchase and one shipment. Confirm your finish and model year, then this is the right kit to order for a complete hot-and-cold upgrade.

Finish Options and Custom Colors

The 67BB is available in three standard finishes and a custom Prismatic color option.

• Raw - unfinished aluminum, suitable for custom powder coat after delivery
• Polished - mirror-finish aluminum for an underhood show look
• Black - blacked-out finish for a clean, low-profile underhood appearance
• Prismatic custom color - enter your Prismatic color code in the field at checkout

If ordering a Prismatic custom color, have your color code ready before checkout - the code field is required and the order cannot be processed without it.

What Comes in the Box

The 67BB ships as a complete hot side and cold side charge air piping kit - both pipes, silicone boots, and stainless T-bolt clamps are included.

• No Limit Fabrication 3" Cold Side charge air pipe
• No Limit Fabrication 3" Hot Side charge air pipe
• High-quality silicone boots (hot side and cold side)
• Stainless steel T-bolt clamps

Both charge air pipe circuits are covered in this one kit - no separate pipe purchases are required for the hot side and cold side replacement scope this kit addresses.

67BB Kit Specifications

If your year, Super Duty line, and tuning situation all match, the 67BB is the correct complete charge air piping upgrade to order.

Avoid These Common Mistakes

• Installing without tuning: The 67BB requires aftermarket tuning after install. Running this kit on a stock-tuned truck will cause drivability issues. Tuning must be in place or arranged before the truck goes back on the road after install.
• Skipping the Prismatic color code: If you select a custom Prismatic color, the color code field at checkout is required. An order submitted without the correct code cannot be processed correctly - have the code ready before checkout.
• Ordering for a non-6.7L Powerstroke: The 67BB fits the 6.7L Powerstroke Super Duty only. It does not fit the 6.0L, 6.4L, or 7.3L Powerstroke engines.
• Assuming only one side is included: The 67BB includes both the 3" hot side and 3" cold side pipes. If you only need one side, the individual kits are available separately.

Fitment - 2011-2026 6.7L Powerstroke Super Duty

• 2011-2026 Ford F-250 Super Duty 6.7L Powerstroke
• 2011-2026 Ford F-350 Super Duty 6.7L Powerstroke
• 2011-2026 Ford F-450 Super Duty 6.7L Powerstroke
• 2011-2026 Ford F-550 Super Duty 6.7L Powerstroke

This kit does not fit any other Powerstroke platform. Confirm your year and Super Duty line before ordering.

Before You Order - Final Checklist

• Truck is a 2011-2026 Ford F-250, F-350, F-450, or F-550 Super Duty with the 6.7L Powerstroke
• Aftermarket tuning confirmed in place or planned before install
• Finish selected - Raw, Polished, Black, or Prismatic color code ready
• Model year selected at checkout

For a tuned 2011-2026 6.7L Powerstroke Super Duty that needs both charge air circuits upgraded in one order, the No Limit Fabrication 67BB Boost Bundle Kit is the correct kit to order - confirm your finish and tuning situation, and proceed with confidence.

Frequently Asked Questions