filter

FloPro driver side and passenger side stock replacement pipes with gaskets & O2 sensor bungs. Use with EGR present vehicles.We have re-invented 6.4L up-pipes and they are here to stay. Many 6.4L Ford drivers are experiencing failure from their stock up-pipes. There are some solutions out there but w...

With their high torque design, these band clamps offer a tighter seal versus conventional u-clamps and flat band clamps. Premium Stainless Steel Torca construction.Performance Pressure Seal - Exhaust clamp 10167 is engineered to create a 360° pressure seal that ensures an airtight fit without ...

Original equipment brake lines are highly rust prone. This Dorman OE FIX brake hydraulic line kit is made of upgraded stainless steel to resist corrosion. It's also pre-formed to fit specific vehicle applications for easier installation.Upgraded material - this replacement brake line kit is made of ...

Kit includes Gaskets and Hardware!Extended Length Up Pipe SetHigh Flow Manifolds RequiredThis extended length high flow up pipe set allows 53% greater flow than stock and is a designed to work with DHD or PPE high flow manifolds. Unlike factory parts, DHD's up pipe is manufa...

Kit includes Gaskets and Hardware!Stainless Duramax Up Pipe SetBest FIT! Best Value!NO COREThese full featured OEM length up pipes are an excellent value! These are brand new and include all the high flow, high quality features your looking for at half of new GM LB7 up-pipes.DHD has taken OEM replac...

LB7 High Pressure Injector Lines (Set Of 8)Fits 2001-2004 Chevy/GMC 2500/3500 HDPart# DMAX720123Brand New High Quality Stainless Steel Injector Lines resist the corrosion that is prone to happening on the OE parts. It is always a good idea to replace the high pressure fuel lines when replacing ...

Fits: 2001-2005 GM 2500HD 6.6L Duramax LB7/LLY (CREW CAB), 2001-2004 GM 2500HD 6.6L Duramax LB7/LLY (CREW CAB)Order the Dorman Stainless Fuel Line Kit for your truck today. Every component that is a part of this line is a direct fit replacement that maintains the factory function. Each component is ...

Fits: 2001-2005 GM 2500HD/3500HD 6.6L Duramax LB7 (Extended Cab)Order your Dorman Stainless Steel Fuel Line Kit for your truck today. Every Dorman part is built to maintain factory operation. Every component that is part of the Dorman's OE Solutions line is a direct-fit replacement that maintains th...

DmaxStore Stainless Steel Brake linesFits 2001-2010 Chevy/GMC 2500/3500 HDPart# XD-BrakeLines-0110Replace your stock rubber brake lines with these new state of the art DmaxStore stainless steel brake lines. Over years of use the stock rubber brake lines can start to crack and get a spongy feel in th...

This item is not available for expedited shippingDHD's competition drive shaft hoops and blow shields are designed to keep you safe and minimize component damage in the event of a failure. This hoop is by far one of our most popular hoops. The 600-414 is designed to work specifically with the AAM 11...

This item is not available for expedited shippingOur DHD front drive shaft blow shields are a direct bolt on kit that comes with everything you need to safely house your front driveshaft. No drilling or welding is required for these shields to work properly. All drive shaft hoops/blow shields come i...

This item is not available for expedited shippingOur DHD front drive shaft blow shields are a direct bolt on kit that comes with everything you need to safely house your front driveshaft. No drilling or welding is required for these shields to work properly. All drive shaft hoops/blow shields come i...

Fits: 2001-2016 GM 6.6L Duramax (For Use With XDP Duramax Crankshaft Pin Kit XD331)The XDP Life-Long Cobalt Steel Drill Bit is a replacement drill bit for the XDP Duramax Crankshaft Pin Kit XD331. This drill bit is the same high-quality bit that comes with the XDP Crankshaft Pin Kit, and is availabl...

Fits: 2001-2016 GM 6.6L Duramax (For Use With XDP Duramax Crankshaft Pin Kit XD331) The XDP Steel Alloy Dowel Pin can help avert catastrophic engine failure from a sheared dowel pin. This dowel pin is the same high-quality pin found in the XDP DUramax Crankshaft Pin Kit XD331 and is now available...

Pusher Intake Manifold for Cummins 5.9L turbo diesel engines in 2003-2007 Dodge Ram trucks. All Pusher intake manifolds can be used with or without the factory heater grid. Fully TIG welded, 3" mandrel bent tubing, with a 1/2" thick flange and 1/4" thick dipstick mount. This ...

Original equipment brake lines are highly rust prone. This Dorman OE FIX brake hydraulic line kit is made of upgraded stainless steel to resist corrosion. It's also pre-formed to fit specific vehicle applications for easier installation.Upgraded material - this replacement brake line kit is made of ...

Original equipment brake lines are highly rust prone. This Dorman OE FIX brake hydraulic line kit is made of upgraded stainless steel to resist corrosion. It's also pre-formed to fit specific vehicle applications for easier installation.Upgraded material - this replacement brake line kit is made of ...

This item is not available for expedited shippingDHD's competition drive shaft hoops and blow shields are designed to keep you safe and minimize component damage in the event of a failure. This hoop is the first Dodge specific axle hoop. The 600-421 is designed to work specifically with the AAM 11.5...

6.0L & 6.4L Tool Steel Valve Bridge SetWhen installing new rocker arms or Adjustable rockers it is a good idea to start out with a new surface for wear.• 100% American Made• Billet Tool Steel• Surface Treated• Full Set of 16OEM Numbers: 3C3Z-6564-CA, 8C3Z-6564-ARCD: RCD-1730880006,&...

All new stainless steel fuel tube nuts from Fleece Performance.  Ensure a proper seal on your injector tubes and high pressure injection lines with our high tolerance nuts produced from 300 series stainless steel.  Includes a quantity of 6 nuts. APPLICATION NOTESReplaces Cummins P/N: ...

6.4L Ford Power Stroke 304 Stainless Steel Heavy Wall Up Pipe SetOptions Include:• OE Style Replacement For 6.4L Manifolds• For Use With 6.0 ManifoldsRCD: RCD-1740280006, RCD-1740280003...

Shibby Engineering's boost tube is designed to replace the factory intercooler tube. It is constructed from 3.5" mandrel bent stainless steel. The boost tube increases efficiency, spool-up & throttle response. This product comes uncoated in the raw material finish. Fitment: Fits stock intak...

Under extreme use tie rods can bend or even break, leaving you stuck. Sold in a pair, these easy to install sleeves thread onto the inner tie rod making it nearly impossible to break or bend.Made from high quality Stainless steel for long lasting good looks, but more importantly, easy to service. Th...

This item is not available for expedited shippingOur DHD front drive shaft blow shields are a direct bolt on kit that comes with everything you need to safely house your front driveshaft. No drilling or welding is required for these shields to work properly. All drive shaft hoops/blow shields come i...

DmaxStore Stainless Steel Brake linesFits 2011-2019 Chevy/GMC 2500/3500 HDPart# XD-BrakeLines-1119Replace your worn out stock brake lines with these new stainless steel brake lines, over years of use the stock rubber brake lines can start to crack and get a spongy feel in the brake pedal and al...

Installs in place of the Factory stabilizer; all hardware is provided. A higher nitrogen charge pushes to the Right to counter-act a Left Hand Tire Pull.- Direct bolt-in replacement- Corrects left tire pull, adjustable- Inside the Carli Stainless Stabilizer- Fitment: 2014+ Ram 2500, 4×4- Fitme...

Under extreme use tie rods can bend or even break, leaving you stuck. Sold in a pair, these easy to install sleeves thread onto the inner tie rod making it nearly impossible to break or bend.  Made from high quality Stainless steel for long lasting good looks, but more importantly, easy to...

The 2019+ High Mount Steering Stabilizer saw a complete redesign from it’s predecessor to fit the updated steering drag-link.We designed a bracket from doubled-up 3/16″, cold-rolled US steel welded together and gusseted to create the ultra-strong, 3/8″ thick bracket that sandwiches between the...

This 4" High Flow, 2 Piece Down Pipe drastically improves flow and installs much easier than the inferior factory unit, and is made of 304 Stainless Steel. This unit is a factory replacement, so it will work with any exhaust and any turbocharger that works wit the factory location. INSTALL I...

This item is not available for expedited shippingDHD's competition drive shaft hoops and blow shields are designed to keep you safe and minimize component damage in the event of a failure. This hoop is the newest addition to our product line and is designed to fill a large gap in fitment. The 600-40...

5.9L 12V Cummins Dual Steel Ring Marine 155° Coated Skirt Chamfered PistonIncludes rings, wrist pin, and wrist pin retainers.Interstate Mcbee: M-3800756...

Solid Steel LTD 3rd Gen Style Adjustable Trackbar and retrofit kit 94-02 4x4  Solid Steel Industries LTD. in conjunction with a chemist and a rubber bushing manufacturer have designed a high quality rubber bushing that is better than the OEM bushings on the 2003 and up Trackbars. Using ...

Replace your damaged cooling fan blade with this direct replacement. This vehicle-specific application is engineered for a perfect fit and is made from quality materials to ensure durability and restore proper cooling system operation.Direct replacement - this engine cooling fan blade fits and funct...

Pusher intake manifold for Cummins 5.9L turbo diesel engines in 1994-1998 Dodge Ram trucks. The Pusher 12v manifolds are hydro boost compatible and all Pusher intakes can be used with or without the factory heater grid. Fully TIG welded, 3" mandrel bent tubing, with a 1/2" thick fla...

Unleash torque and horsepower with this Twisted Steel series header for your 24 valve Cummins. 1-3/4" head pipes stepped to 2" mandrel bent 304 stainless steel tubing and a 1/2" laser cut T3 divided flange builds quicker turbo boost, improves throttle response and overall performance. TIG welded for...

Pusher Intake Manifold for Cummins 5.9L turbo diesel engines in 1998.5-2002 Dodge Ram pickup trucks. All Pusher intake manifolds can be used with or without the factory heater grid.Fully TIG welded, 3" mandrel bent tubing, with a 1/2" thick flange and 1/4" thick dipstick mount. This intake co...

Stainless steel universal coolant level switch for use with the Fleece Performance coolant tank (Part Number: FPE-34235) or custom configuration tanks.  Features a stainless steel body with 1" NPT thread, 8" harness, and two-pin metripack connector for direct connection to the chassis harness o...

Installing a quality USA Standard Gear spool is a cost-effective way to get 100% lockup. Installation is easy as they install in place of your differential carrier assembly. Each USA Standard Gear spool is made from high-quality 8620 steel and heat treated for additional strength. A spool is an outs...

With their high torque design, these band clamps offer a tighter seal versus conventional u-clamps and flat band clamps. Premium Stainless Steel Torca construction.Performance Pressure Seal - Exhaust clamp 10166 is engineered to create a 360° pressure seal that ensures an airtight fit without ...

Air tank works in conjunction with an air compressor to store compressed air and hold it until needed. Storing air allows for quicker product activation and is especially valuable when operating more than one product. These air tanks have welded on mounting brackets. Pacbrake steel air tanks are pow...

Working in conjunction with air compressors, air tanks store the compressed air and hold it until it is required. Storing compressed air allows for quicker product activation, especially when operating more than one product simultaneously.TANK SPECIFICS:Ports: 5 x ¼" (-4) NPTRust Inhibitor: Applied...

Working in conjunction with air compressors, air tanks store the compressed air and hold it until it is required. Storing compressed air allows for quicker product activation, especially when operating more than one product simultaneously.TANK SPECIFICS:Ports: 5 x 1/4" (-4) NPTRust Inhibitor: Applie...

This item is not available for expedited shippingNot seeing a hoop for your vehicle or looking to build on a budget? Consider purchasing this steel ring to get your project started. This 8" diameter 1/2" thick ring meets all sanctioned body rules that we are aware of. Specs:8" SCH 80 Pipe A-500...

Fits: Universal Steel Full Size Pickup This kit makes conversion to a SMOKERS stack system as easy as it gets. 4" Mandrel bent tubing ensures optimal exhaust flow. This kit fits any 4" performance exhaust system (excluding diesel particulate filter equipped vehicles). With the mounting kit spec...

This item is not available for expedited shippingDHD's competition drive shaft hoops and blow shields are designed to keep you safe and minimize component damage in the event of a failure.  The 600-413 was originally designed for 2001-2010 2500HD 3500HD trucks, however its unique mounting sleev...

Fits: Universal- For 4" O.D. TubingThis Vibrant 1168 4" Stainless Steel Seal Clamp provides superior clamping and sealing of overlap joints without permanently distorting the tubing. Features: 1.25" Band WidthFits 4" O.D. TubingStainless Steel ConstructionProvides Superior Clamping & S...

Vibrant 3" Stainless Steel T-Bolt Clamps (Pack of 2) Clamping range: 3.28" - 3.60"Part number: 2795...

Description: Stainless Steel Seal Clamp for 3 1/2" O.D. Tubing (1.25" Wide Band)Material: T430 Stainless SteelWarranty: One Year Limited WarrantyNotes:Vibrant Performance Stainless Steel Exhaust Seal Clamps provide for superior clamping and sealing of overlap joints without permanentl...