Shop By Category
Your Cart

filter

Brand: Carli Suspension Part Number: CS-DSSOSK-X
Opposing Steering Stabilizer SystemThis Kit includes both the above Low-Mount and High Mount Stabilizers with the addition of the Differential Guard and Bracket. The purpose of the Differential Guard and Bracket are to provide an alternate means of mounting the low-mount stabilizer, changing its dir...
$1,160.00

Brand: Bosch Part Number: 1465ZS0044
Fuel Pressure RegulatorBrand: Bosch Original EquipmentCondition: NewLimited 12 Month unlimited mileage warranty - Refer to Manufacturer's warrantyEngine Fitment:GM Duramax LB7 6.6LTechnical Information:Also called MPROP or Fuel Control Actuator - FCAMounts on High Pressure Fuel PumpOld part num...
$157.43

Brand: Gates Part Number: 18400
Fuel filter delete hose if using Fass, AirDog, or similar setup. CYA DISCLAIMER- You CANNOT delete your fuel filter housing without having alternate filtration.      ...
$18.99

Brand: Position 1 Performance Part Number: P1KLPKLLY
Position 1 Performance Lift Pump kit with Kennedy Diesel pump. These compact little pumps are just what is needed to keep a steady supply of low pressure fuel available at the inlet of your injection pump at all times. They are nearly silent in operation as well as being seal-less, brushless and lea...
$390.22

Brand: Pacific Performance Engineering Part Number: 128041000
Fits: 2001-2010 GM 6.6L Duramax LB7/LLY/LBZ/LMMThis kit the perfect upgrade when building a 5 or 6 speed Allison 1000 transmission. This kit is recommended for trucks hauling heavy loads and making high horsepower. The increase in line pressure improves your clutches’ holding ability and the calib...
$44.99

Brand: Superchips Part Number: 2545
Please note: Flashpaq PN 2545 covers up to the 2016 model year GM only.For2017+ GM coverage please refer to PN 2547.If you are a GM truck owner who is looking for a device to help calibrate for your large aftermarket tires, read/clear trouble codes, adjust your speed limiter and more, then look no f...
$238.95

Brand: Nitro Gear & Axle Part Number: GPRAM-456
Fits:  2003-2009 Dodge Cummins 2500/3500 4WD (Diesel Only) 2010 Ram 2500/3500 4WD (Deisel Only) This Nitro Gear & Axle GPRAM-456 Gear Package Kit is the perfect component for your Dodge Cummins truck with a 4.56 gear ratio. This Kit is manufactured from computer-controlled gear lap...
$1,433.00

Brand: Nitro Gear & Axle Part Number: GPRAM-4.11
Fits: 2003-2010 Dodge Cummins 2500/3500 4WD (Diesel Only) This Nitro Gear & Axle GPRAM-4.11 Gear Package Kit is the perfect component for your 2003-2010 Dodge Cummins 2500/3500 4WD (Diesel Only) with a 4.11 Gear Ratio. This Kit is built with a computer controlled gear lapping, that ensures ex...
$1,433.00

Brand: Position 1 Performance Part Number: P1KLPKLML
Position 1 Performance Lift Pump kit with Kennedy Diesel pump. These compact little pumps are just what is needed to keep a steady supply of low pressure fuel available at the inlet of your injection pump at all times. They are nearly silent in operation as well as being seal-less, brushless and ...
$377.34

Brand: Nitro Gear & Axle Part Number: GPRAM2500-4.11
Fits: 2013-2018 Ram 2500/3500 4WD This Nitro Gear & Axle GPRAM2500-4.11 Gear Package Kit is the perfect component for your 2013-2018 Dodge Ram 2500/3500 4WD with a 4.11 Gear Ratio. This Kit is manufactured from controlled gear lapping. This kit is vital for trucks with larger tires because it...
$1,650.00

Brand: XDP Mfg Part Number: XD365
Fits: 2017-2019 Ford Powerstroke Filter out harmful contaminants in the primary cooling system of your 2017-2020 Ford 6.7L Powerstroke with the XDP 6.7L Coolant Filtration System XD365. The XDP Coolant Filtration System is an ideal upgrade under the hood of any Powerstroke. Your primary cooling...
$139.95

1983-1997 F250/F350 Front Fuel Tank Diesel Sending Unit
Backordered
Brand: Complete Performance Part Number: FMSU-FRONT
Backordered til Mid July    **Updated on 04/17/2024** Front Diesel Sending Unit (1983-1997) This high quality replacement front (midship) fuel sending unit is manufactured to the original factory specifications. This comes with a new lock ring and o-ring. It does not come with a ...
$188.43

Brand: Complete Performance Part Number: FMSU-REAR
Rear Diesel Sending Unit (1983-1997)This high quality replacement fuel sending unit is manufactured to original factory specifications. This set includes a new lock ring and o-ring. This set does not include a filter strainer. When making your selection, just choose which year fits your truck.Fits:1...
$188.43

Brand: MBRP Part Number: S6148AL
Do you have a First Generation Dodge pickup? If so, the stock exhaust is probably in pretty rough shape, or fell off years ago. Breathe new life into your 89-93 Dodge Ram 250 or 350 truck today.  TWO WHEEL DRIVE ONLY MBRP's 4" turbo back exhaust systems not only look great, they sou...
$619.99

Brand: ATS Diesel Performance Part Number: 314-101-2164
Fits: 1994-2007 Dodge 5.9L Cummins 47RE/48RE Install the 47/48RE Billet 2nd Gear Band Lever (4.2 Ratio) on to your 1994-2007 Dodge 5.9L Cummins. This part is located at the front of the transmission between the 2nd gear servo and the band strut and cannot be changed out and upgraded without remov...
$43.16

Brand: Aftermarket Assassins Part Number: 108-1068
P90X Primary Clutch Separation Tool - Fits all P90X primary clutches  *Hex Key shown in photo 2 is an optional add-on*Tool PN: 108-1068Hex Key PN: 108-1069...
$65.00

Brand: USA Standard Gear Part Number: ZG D70-354
Fits: Dana 70 USA Standard Gear ring and pinion sets are designed to exceed OEM specification. All sets receive rigorous in-house quality evaluation to ensure products pass dimensional, material, and fitment testing. Fits Dana Spicer 70 10.50" ring gear diameter 29 spline pinion ...
$372.89

Brand: Yukon Gear and Axle Part Number: YG D70-354
Fits: Dana 70 (3.54 Ratio) Yukon Gear & Axle high-performance ring and pinion gear sets are the benchmark of quality in the automotive gear industry. Yukon engineers use state-of-the art design, advanced heat-treating techniques, and leading-edge quality testing processes to ensure the struct...
$784.89

Brand: USA Standard Gear Part Number: ZG D80-331
Fits: Dana 80 USA Standard Gear ring and pinion sets are designed to exceed OEM specification. All sets receive rigorous in-house quality evaluation to ensure products pass dimensional, material, and fitment testing. Fits Dana Spicer 80 11.25" ring gear diameter 37 spline pinion ...
$699.89

Brand: Yukon Gear and Axle Part Number: YG D80-354
Fits: Dana 80 Yukon Gear & Axle high-performance ring and pinion gear sets are the benchmark of quality in the automotive gear industry. Yukon engineers use state-of-the art design, advanced heat-treating techniques, and leading-edge quality testing processes to ensure the structure and surfa...
$648.89

Brand: Donaldson Filtration Part Number: FPE-DON-P553203-12
The Donaldson P553203 Fuel Filter is a direct replacement filter for the Fleece L5P Duramax Fuel Filter Kits, 1998.5-2018 Dodge Ram Cummins Auxiliary Fuel Filter Kits, and PowerFlo lift pump kits. The filter is rated at 3 microns. This case quantity includes 12 filters.  Fits the following k...
$279.99

Brand: Donaldson Filtration Part Number: FPE-DON-P555095
The Donaldson P555095 Fuel Filter is a direct replacement filter for use with the Fleece Performance Engine Mounted Filter Assembly for 6.7L Ford Powerstroke, part number FPE-FMC-UHFA-1123.  Fits the following kits: FPE-FMC-UHFA-1123 Fleece Performance: FPE-DON-P555095 ...
$17.99

Brand: Donaldson Filtration Part Number: FPE-DON-P555095-12
The Donaldson P555095 Fuel Filter is a direct replacement filter for use with the Fleece Performance Engine Mounted Filter Assembly for 6.7L Ford Powerstroke, part number FPE-FMC-UHFA-1123.  This case quantity includes 12 filters. Fits the following kits: FPE-FMC-UHFA-1123 Fleece Per...
$199.99

Part Number: YG GM11.5-373
Fits: GM & Chrysler 1.5" Differentials 3.73 Ratio Yukon Gear & Axle high-performance ring and pinion gear sets are the benchmark of quality in the automotive gear industry. Yukon engineers use state-of-the art design, advanced heat-treating techniques, and leading-edge quality testin...
$769.89

Brand: Diesel Fuel Filter Kits Part Number: 0312FLTDFKIT
-THIS ITEM CANNOT BE EXPEDITED- STANDARD SHIPPING ONLYThe 03-12 Cummins trucks came with a 7 micron OEM fuel filter that is only about 60% efficient removing contaminants. That's right only 60% efficient! The inadequate filtration along with increasingly bad fuel, is why they are notorious for takin...
$297.50

Brand: SPE Diesel Part Number: SPE-S100180
Backordered til Late July   **Updated on 06/10/2024** NOT AVAILABLE FOR EXPEDITED SHIPPING The SPE 6.7L Powerstroke Oil Pan is a cast aluminum pan that was not only designed as a direct factory replacement but features a vast amount of improvements & upgrades.  BENEFITS: ...
$259.00

Brand: Bosch Part Number: 0432133877K
Bosch 190 Injectors- 30HP Gain Injectors91.5-93 Dodge 12 Valve Cummins Diesel Note: Performance figures on 1st Gen injectors are approximate values compared to a stock injector with a stock injection pump. Individual results can vary depending on pump settings. Some trucks may experience some hazin...
$465.25

Brand: Nitro Gear & Axle Part Number: GPDURAMAX-4.11
2000-2010 GM 2500/3500HD Duramax or 8.1L Nitro Front & Rear Gear Package KitRecommended: 6 quarts of Nitro Synthetic Plus Gear LubeGear Package Kit Includes:Nitro front ring & pinionNitro front Master Install KitNitro rear ring & pinionNitro rear Master Install Kit*Note Other required pa...
$1,433.00

Brand: Nitro Gear & Axle Part Number: GPSD17-4.88-105
Fits: 2017-2021 Ford F250 + 350 4WD SRW (10.5" Rear)Recommended: 7 quarts of Nitro Synthetic Plus Gear LubeGear Package Kit Includes:Nitro front ring & pinionNitro front Master Install KitNitro rear ring & pinionNitro rear Master Install KitARB Package Notes:4.56 & up takes RD1664.1...
$1,604.00

Brand: Diamond Eye Part Number: 220100
4 Inch, aluminized. Bolts on to the stock turbocharger. Diamond Eye: 220100IMPORTANT NOTE: Due to varying laws and regulations, most Diamond Eye exhaust systems & components cannot ship to California. Take a look at our product selection for alternatives from other manufacturers if you are in ...
$151.91

Brand: DieselSite Part Number: CFIKD
Coolant filters are not a new idea to the diesel engine world. They come in most OEM applications for medium duty and OTR tractor trailer rigs. The idea was somehow tossed aside for light duty applications, most likely due to cost. For our light duty trucks it is a very important issue that needed t...
$165.00

Brand: Nitro Gear & Axle Part Number: F10.5-430-NG
Ford 10.5" 4.30 Ring and PinionTech Note:99 & Newer models can use 10.25" ring & pinion as a replacement. When replacing a 10.5" gear set with a 10.25" you must utilize the 10.25 inner pinion bearing, recommend MKF10.25. May require new yoke.Nitro gears are manufactured from 8620 steel gear ...
$343.00

Brand: Nitro Gear & Axle Part Number: GM9.25-342R-NG
Fits: AAM 9.25" (Reverse Rotation)GM IFS & Dodge (AAM) 9.25" Reverse High Pinion 3.42 Nitro Ring & PinionTech Note:Direct fit for 2007 & Newer Dodge 2500 & 3500 with OEM carrier ONLY.2003-2006 Dodge vehicles using this ring & pinion on an OEM carrier require MRG925A ring gear spa...
$324.00

Brand: Nitro Gear & Axle Part Number: AAM11.5-373-NG
Fits: GM & Chrysler 11.5" Differential AAM 11.5" 3.73 Nitro Ring & PinionNitro gears are manufactured from 8620 steel gear forgings in the same manufacturing facilities as GM, Dodge, Ford & Toyota. They are precision machined using computer controlled processes, heat treated, CNC tr...
$516.00

Brand: Nitro Gear & Axle Part Number: AAM11.8-430-NG
AAM 11.5" / AAM11.8" 4.30 Nitro Ring & PinionTech Notes: These are a premium aftermarket gear set that is far superior than your stock 11.5" gear set. These Nitro Gears are a true 11.8" diameter gear set and are a direct replacement for your 11.5" factory gear and also a direct replacement for 1...
$516.00

Brand: XDP Mfg Part Number: XD143
The XDP Coolant Filtration System is designed to filter solid particles from your trucks coolant. Contaminants such as casting sand and sediment are known to damage many components in your cooling system. By removing these contaminants you are able to extend the life of your coolant, water pump, EGR...
$129.95

Brand: AirDog by PureFlow Technologies Part Number: A4SPBD153
Flows 100GPH!  Fits 1998.5-2002 Dodge 5.9L Cummis Diesel Equipped trucks. PureFlow AirDog® manufactures and supplies AirDog® Fuel Air Separation Systems and high performance lift pumps for diesel pick-up trucks. AirDog® works by using the Fuel Preporator®. The system can ...
$729.00

Brand: AirDog by PureFlow Technologies Part Number: A7SABD525
The AirDog II-5G A7SABD525 DF-165-5G Air/Fuel Separation System is a state-of-the-art fuel delivery system for your 1998.5-2004 Dodge 5.9 24V Diesel (Moderate to Extreme).The AirDog II-5G offers protection and performance unlike any other lift pump. Their patented air separation, along with ...
$859.00

Brand: AirDog by PureFlow Technologies Part Number: A7SABF592
Features: Preset @ 50-55 PSI Supports 500HP-800HP Flows 165 Gallons Per Hour Improved Throttle Response Smoother Idle & Acceleration The PureFlow AirDog II-4G Air/Fuel Separation System for your 1999-2003 Ford 7.3L Powerstroke is the next generation in the fuel delivery system, resulting i...
$859.00

Brand: FASS by Diesel Performance Products Part Number: FAS F15 140G
Our FASS Adjustable Diesel Fuel Pumps are designed to be the most versatile high performance fuel pump on the market that allows for adjustable fuel pressures to meet the demand of high performance Ford Powerstroke applications. Manufactured with the same motor used in our Titanium Signature Series ...
$699.00

Brand: FASS by Diesel Performance Products Part Number: FAS F15 220G
Our FASS Adjustable Diesel Fuel Pumps are designed to be the most versatile high performance fuel pump on the market that allows for adjustable fuel pressures to meet the demand of high performance Ford Powerstroke applications. Manufactured with the same motor used in our Titanium Signature Series ...
$749.00

Brand: FASS by Diesel Performance Products Part Number: FAS F15 240G
Our FASS Fuel Systems Signature Series Adjustable Diesel Fuel Pumps are designed to be the most versatile high performance fuel pump on the market that allows for adjustable fuel pressures to meet the demand of high performance Ford Powerstroke applications. Manufactured with the same motor used in ...
$799.00

Brand: FASS by Diesel Performance Products Part Number: TS F14 240G
The Titanium Signature Series diesel fuel system was engineered by FASS Diesel Fuel Systems to be the top performing, longest lasting and most reliable aftermarket filtration system in the diesel industry.  Rated at 240 gallons per hour, at 70 PSI and backed by our limited lifetime warranty the...
$849.00

Brand: Irate Diesel Performance Part Number: IDP-OBSFUEL-S
Irate Diesel Performance OBS Fuel System for 1994-1997 Ford 7.3L Powerstroke Contents: IDP 304SS bracket Deatschwerks pump Parker hose (Selector Valve to Motor & Back) IDP Regulated Return system Wiring Harness Plug for Valley & Parker fittings JIC Fittings System installs from ...
$1,275.00

Brand: H&S Performance Part Number: HSMCC
This product will allow you to load custom tuning files made with the H&S MCC Tuning Software on to your H&S Tuning Device. Please supply your complete 17 digit VIN and a valid e-mail address. Once this Unlock Code is purchased, please allow one business day to process the order. You will re...
$240.00

Brand: High Tech Turbo Part Number: HTBR
Wastegate Resistor, needed for the installation of an aftermarket turbo on a 3rd generation Dodge Cummins...
$31.79

Brand: Bosch Part Number: 3200VESPG
This 3200 rpm spring fits all VE Injection pumps on Dodges from 1989 to 1993. The spring will allow the injection pump to fuel all the way to 3200 rpm if you have enough fuel. In other words a stock motor with no fueling mods may not spin all the way to 3200. Using this spring will make your truck m...
$19.30

Brand: Bosch Part Number: F002D13215
This 3600 rpm spring fits all VE Injection pumps on Dodges from 1989 to 1993. The spring will allow the injection pump to fuel all the way to 3600 rpm if you have enough fuel. In other words a stock motor with no fueling mods may not spin all the way to 3600. Using this spring will make your truck m...
$8.52

Showing 1 to 48 of 100 (3 Pages)