Passes the test. Again and again.Others build and ship without testing. Not Banks. Our Ram-Air Intakes start out as CAD software prototypes and are put through flow simulations. The design is refined until the simulation shows optimal performance. Then a hardware prototype is made and the design is ...
Bosch New Common Rail Injector for 2004-2005 GM 6.6L Duramax LLY Engines
When your hard working LLY Duramax engine needs new injectors, it deserves the OE injector to be put back into the engine to ensure a long life ahead of it. Bosch was the original OE supplier for this injector to GM wh...
04.5-05 6.6L LLY Duramax Stock Replacement Bosch Reman InjectorDon't be fooled by knock-offs, cheap imitations, or remans these are Genuine Bosch injectors with a 12 month, unlimited mile warranty!This is a 2004-2005 LLY Duramax Diesel Bosch Fuel Injector, that has been remanufactured by the same co...
DFC engines may take up to 14 weeks to ship. Please contact us to verify lead times if you are in a hurry, before purchasing. Built for work trucks, daily drivers and the diesel enthusiast in mind these engines are a vast improvement from stock as they contain important upgrades to common...
Duramax 04.5-05 LLY Injector: Brand New stock power level injector. Comes with all the latest revisions.
Sold individually with no core charge.
Details:
Liter: 6.6
Engine: LLY Duramax
Years: 2004.5-2005
Fuel Type: Diesel
Condition: New
Part number: DDP NLLYNEW
...
Outflow the factory air intake system in your 2004.5-2005 GM 6.6L Duramax LLY with the S&B Filters 75-5102/75-5102D Cold Air Intake Kit with Cleanable Filter or Dry Filter. S&B Air Intake systems are engineered to give you an increase in airflow, providing you with a boost in horsepower, torque, and...
WCFab 4” Intake kits are designed to work with the factory turbocharger or upgraded “drop-in” style turbochargers. Using a high flow AFE dry type air filter for more air flow and better filtration over the factory unit this intake kit will provide more horsepower and torque. A...
WCFab 4” Stage 2 Intake kits are designed to work with the factory turbocharger or upgraded “drop-in” style turbochargers. Using a high flow AFE dry type air filter for more air flow and better filtration over the factory unit this intake kit will provide more horsepower and torque...
Increase airflow while adding custom styling under the hood of your 2004.5-2005 GM 6.6L Duramax LLY with the HSP LLY Cold Air Intake. This 4" mandrel bent intake draws fresh are from the headlight bezel and fender port for a consistent and re-flowing path that out-performs other intakes on the ...
The all new redesigned intake kit for the 2006-2007 Duramax 6.6L takes advantage of our latest silicone seals and air filter designs. With improved air flow by over 15% than previous model, the 75-5080 simply outperforms the stock intake and looks better too.
S&B Cold Air Intakes increase cool airf...
Position 1 Performance Lift Pump kit with Kennedy Diesel pump. These compact little pumps are just what is needed to keep a steady supply of low pressure fuel available at the inlet of your injection pump at all times. They are nearly silent in operation as well as being seal-less, brushless and lea...
These high performance motor mounts are the original! Since 2013, DHD engine mounts have set the standard for upgraded Duramax engine mounts. Our design maintains engine alignment and engine height while adding the strength and durability of a high performance polyurethane. The polyurethane we use i...
Fits: 2001-2019 GM 6.6L Duramax LB7/LLY/LBZ/LMM/L5PThis PPE Oil Filter Adapter allows you to convert from CAT oil filter back to an OE style oil filter in your 2001-2019 GM Duramax Truck. This adapter is built for smooth operation and to minimize cross threading of the oil filter.PP...
Do you need an Internally Regulated Alternator for your 2003-2010 Dodge Ram pickup or 5.9 or 6.7 Diesel Cummins conversion? This unit has a maximum output of 160+Amps and will produce 90A at idle. If you are putting the 5.9 or 6.7 Diesel powerplant into a vehicle not wired or equippe...
Alliant Power Reman Common Rail Injector for 2004.5-2005 GM 6.6L Duramax LLY EnginesAlliant Powers remanufactured injectors are built for engines that demand the most out of their fuel systems in the toughest of conditions. Alliant Powers PN# AP55504 is the technicians choice when you want to ...
Diamond Advantage (DA) Remanufactured Turbochargers are designed to provide peak performance. • Turbochargers are completely disassembled to allow for in-depth quality assurance inspections down to the component level • Dynamic balancing performed at both the component level and at the center ...
The HSP LLY Cold Side Intercooler Pipe to Factory Bridge is a bolt on upgrade over the factory intercooler pipe in your 2004.5-2005 GM 6.6L Duramax LLY. This 3" mandrel bent pipe can flow 53% more air than the factory unit and responds well when paired with turbo and fuel upgrades. Included is a 2.2...
PLEASE NOTE THAT THIS PRODUCT HAS A 2-4 WEEK LEAD TIME!Match the intercooler pipe to the HSP Max Flow Bridge in your 2004.5-2005 GM 6.6L Duramax LLY with the HSP LLY Cold Side Intercooler Pipe for the HSP Bridge. The HSP Intercooler tube is built from 3" mandrel tubing. Designed to increase horsepow...
2004.5-2005 Reman LLY Duramax Stock Turbo Remanufactured by Industrial Injection
Part number: 848212-0001SESuperseded Part number: IISCHEVY66Y
$400 core applies, customer is responsible for core return freight.
1 year warranty....
PurePower turbochargers offer a quality unmatched by our competitors.
Unique 100% functional end-of-line
testing with full RPM sweep
NVH analysis
Hydraulic and pneumatic leak testing
Full VGT/VNT operational testing
Hot gas stand validation
Burst testing validation
10...
Replacement connector with 6" pigtail for use on the 6.6L Duramax turbocharger vane position sensor. Produced in-house, our manufacturing process includes fully automated wire cutting and terminal crimping to ensure you get the highest quality replacement parts you need to get your truck or car back...
Purchase the XDP Remanufactured CP3 Fuel Pump XD522 and replace the underperforming pump on your 2004.5-2005 GM 6.6L Duramax LLY. When your CP3 pump goes bad or begins to function poorly, you can experience low fuel rail pressure and loss of power that could leave you stranded. This remanufactured C...
Billet 6 blade 66mm inducer compressor wheel 68mm exducer 10 Blade turbine Rated at 700+ HP with adequate supporting mods 16mm high flow vaneswork stock legal 100% new turbo 100% drop in No core Updated HD journal bearings, HD 360 thrust Gasket kit incl...
Wagler Competition Duramax Mechanical Belt TensionerDoes away with the weak factory spring belt tensionerThese are a MUST when running dual CP3 pumps on your serpentine belt setupPart Number: WCPC661025.1...
ATS Aurora VFR 4000 Stage 2 TurbochargerFitment: 2004.5-2010 GM 6.6L DuramaxPart Number: 2024024290If you want a turbo that has a clean install, faster spool time, and greater tow capacity over your stock charger, this kit is for you. The ATS Aurora VFR turbocharger series has upgraded ball bea...
Billet 6 blade 62mm inducer compressor wheel 63mm exducer 10 Blade turbine Rated at 550+ HP with adequate supporting mods 16mm high flow vaneswork stock legal 100% new turbo 100% drop in No core Updated HD journal bearings, HD 360 thrust Gasket kit incl...
Billet 6 blade 64mm inducer compressor wheel 68mm exducer 10 Blade turbine Rated at 650+ HP with adequate supporting mods 16mm high flow vaneswork stock legal 100% new turbo 100% drop in No core Updated HD journal bearings, HD 360 thrust Gasket kit incl...
Billet 6 blade 68mm inducer compressor wheel 68mm exducer 10 Blade turbine Rated at 750+ HP with adequate supporting mods 16mm high flow vaneswork stock legal 100% new turbo 100% drop in No core Updated HD journal bearings, HD 360 thrust Gasket kit incl...
Billet 6 blade 68mm inducer compressor wheel 72mm exducer 10 Blade turbine Rated at 800+ HP with adequate supporting mods 16mm high flow vaneswork stock legal 100% new turbo 100% drop in No core Updated HD journal bearings, HD 360 thrust Gasket kit incl...
Billet 6 blade 72mm inducer compressor wheel 72mm exducer 10 Blade turbine Rated at 850+ HP with adequate supporting mods 16mm high flow vaneswork stock legal 100% new turbo 100% drop in No core Updated HD journal bearings, HD 360 thrust Gasket kit incl...
The VVT Stealth 64 Turbo takes a stock appearing LBZ/LLY/LMM turbocharger and overhauls it to meet the demands of the Duramaxtuner team. The stock LBZ/LLY/LMM turbocharger runs out of air at about 530rwhp. It has trouble controlling EGTs on extended pulls past 400HP. The...
• Easy installation• Easy to view mounting location• Works with Bully Day Watch Dog, Triple Dog & GT Tuner• Works with H&S Performance Black Maxx & Mini Maxx• Clean factory look• Comes painted to match factory color style• Comes with adapter pod for mounting the tuner***If ...
When your vehicle’s throttle isn’t what you need, it’s time for a boost with the Bully Dog Thruster. This device is easy to install inline between your vehicle’s pedal position sensor and the vehicle harness. Adjust on the fly and really feel the change as you drive. It’s ideal for off-roa...
When your vehicle’s throttle isn’t what you need, it’s time for a boost with the Bully Dog Thruster. This device is easy to install inline between your vehicle’s pedal position sensor and the vehicle harness. Adjust on the fly and really feel the change as you drive. It’s ideal for off-roa...
Compatible with applications up to 650HP Bully Dog’s turbo charger improves performance and reliability. To ensure long life and dependability, all our turbo chargers are triple balanced up to 180,000 RPM. Our turbo chargers feature high-quality copper journal bearings, copper thrust washer, machi...
The Bully Dog Universal OBDII Block fits the Bully Dog WatchDog and GT Tuner. Over time, the OBDII block can fail or become damaged. Bully Dog 40400-105...
The Keylock DSP5 Switch locks the tune in one position. Tunes may be changed on the fly, but if you need to prevent someone else from switching to another tune, you can lock it into a desired position.*Includes: Keylock DSP 5 and 2 keys.Part Numbers: FTKeyLLY and FTKeyLBZ/LMM...
Duramax 04.5-05 LLY Injector Set: Brand New injector set flowing at 45 percent over, capable of 675 RWHP with proper supporting modifications. A modified or dual CP3 and upgraded turbo(s) are mandatory along with custom tuning.
Not recommended in frequent or heavy towing application...
Chevy Duramax 04.5-05 6.6L LLY Injector Set: Brand New injector set, Nozzles flow at 60 percent over and the injectors have had internal calibration upgrades for added fuel delivery. Injector set is capable of 775 RWHP with proper supporting modifications.
Modified or Dual CP3 and ...
Chevy Duramax 04.5-05 LLY 6.6L Injector Set: Brand New injector set flowing at 20 percent over, approximately 50 RWHP over stock. Injectors capable of supporting up to 575 RWHP with proper supporting modifications. Safe on stock trucks. Excellent street manners and MPG.
Drop in replacem...
Duramax 04.5-05 LLY Injector Set: Brand New injector set flowing at 30 percent over. Biggest injector recommended for stock CP3 pump or turbo. Not recommended for frequent or heavy towing applications with stock turbo.
Sold as a balanced and matched set.
Nozzle Details:
Nozzle Style:...