Shop By Category
Your Cart

filter

Brand: PSC Part Number: PA807
•Cold headed stud with reverse pin prevents center link roll•Induction through hardened and annealed SAE 4140 stud provides extreme wear resistance•Heat treated steel race•Powder metal upper bearing•Heat treated steel race•Relocated grease fitting for easy accessPart Number: PA807...
$200.00

Brand: PSC Part Number: PA808
•Dual tapered roller bearings•Sealed zero-maintenance design•Heat-treated tapered stud•Includes weld in gusset as a bonus•Lightweight aluminum housing•Direct bolt-on replacement•All mounting hardware includedXD Idler Arm Bracket for 1999-2006 GM 2500/3500 4X4Part Number: PA808 ...
$300.00

Brand: Pacific Performance Engineering Part Number: 158040300
(Use with PPE Race Straight or drilled stock Center Link) Give your steering system a strong base that vastly improves on the factory design. Perfect for those who have added larger wheels, more horsepower or use their vehicle for racing, sled-pulling, or off-roading. This forged steel part is eq...
$269.99

Brand: Cognito Part Number: 90222
Fits: 2001-2010 GM 2500HD/3500HD 2WD/4WD This Cognito 90222 8-Lug Idler Pivot assembly is the perfect component for your 2001-2010 GM 2500HD/3500HD 2WD/4WD. A damaged idler pivot could damage your steering system. This Pivot comes with a tapered roller bearings, improved strength and durability.&...
$239.95

Brand: ProForged Part Number: 102-10032
Fits: 2001-2010 GM Silverado/Sierra 2500HD/3500HD The ProForged Idler Arm is the replacement idler arm your vehicle needs. ProForged constructed this idler arm a SAE1045 forged steel housing and SAE4140 chromoly steel ball studs. This replacement idler arm is designed to restore steering feel, ...
$87.08

Brand: Dirty Hooker Diesel Part Number: 800-155x
Stabilize your serpentine belt under high load and high rpm with DHD's add-on belt idler kit. These kits require no belt changes and no modification to belt routing. Simple 1 bolt installation in a factory hole. Features: Increases Belt to Balancer Contact Bridges Gap in Belt Routing Ea...
$119.95

Brand: Dorman Products Part Number: 419-623
Fits: 2001-2016 Gm 6.6L Duramax LB7/LLY/LBZ/LMLThis Dorman 419-623 Idler Pulley for your 2001-2016 GM 6.6L Duramax is built to route the serpentine belt for proper alignment with the accessory drive belt, thereby keeping the alternator charging, the water pump running, and the power steering pump an...
$18.41

Brand: Fleece Performance Part Number: FPE-34657-BLK-SPK
Billet aluminum upper fan idler pulley in our custom spoke design and black anodized finish. Complete with bearing. Our pulley must be used with a factory bolt and spacer. Some aftermarket pulleys will switch to a different length bolt and spacer which will not work with the our bille...
$113.99

Brand: Dayco Part Number: 89168
This Dayco pulley is engineered to meet or exceed the OE specs. Pulled is constructed with high quality materials to ensure durability and reliability. This is a direct fit replacement that provides double high temp seals and lifetime lubricated ball bearings. This Dayco pulley creates less vibratio...
$77.25

Brand: Dayco Part Number: 89094
Idler/ Tensioner pulley by Dayco is a high quality OE style replacement of the existing failed pulley. This dayco pulley is produced with more smooth surfaces and more strict tolerances which aids in less vibration and longer belt life. Fitment:03-18 Dodge Ram 2500/3500 5.9L/ 6.7L Cummins08-18 ...
$41.96

Brand: Beans Diesel Performance Part Number: 21181x
Bean Machine billet pulley kit for your Cummins engine. Pictures may include other types and designs of pulleys to show craftsmanship and options. Power steering pump shafts need a pulley with a .630 bore or a .663 bore. You will need to mic your bore shaft to ensure correct sizing. Made i...
$482.66

Brand: Industrial Injection Part Number: 24FC10
Common rail Cummins smooth billet idler pulley for custom belt routing. This pulley has been tested up to 5500RPM and 2000HP. Designed to match the look of other Industrial Injection pulley's and covers. Fits the 2003-2018 5.9/6.7 idler pulley only.  Part number: 24FC10 ...
$88.66

Brand: Industrial Injection Part Number: 24FC08
Common Rail Cummins Dual CP3 Billet Idler Pulley by Industrial InjectionPart number: 24FC08...
$97.94

Brand: Dorman Products Part Number: 419-685
Fits: 2003-2021 Dodge Ram 5.9L/6.7L CumminsSwitch out the damaged factory part on your vehicle with the Dorman Idler Pulley (Pulley Only). Built to meet or exceed factory specifications. Each part is built to maintain a factory-like fit and function. This component is an OE-style solution for the fa...
$57.66

Brand: Dayco Part Number: 89157
The Dayco 89157 Idler/Tensioner Pulley - Smooth Pulley are superior quality replacement pulleys that are engineered to meet or surpass the factory specifications. This steel pulley is coated with a durable e-coating that is designed to resists corrosion and wear under the most demanding conditions. ...
$40.53

Brand: Dayco Part Number: 89519
Fits:  2005-2007 Ford F-250/350/450/550 6.0L Powerstroke (Dual Alternators)  2011-2019 Ford F-250/350/450/550 6.7L Powerstroke (Dual Alternators)  2003 Ford Excursion 6.0L Powerstroke (Dual Alternators) Dayco® No Slack® Idler/Tensioner Pulleys are built with smooth...
$46.67

Brand: Dayco Part Number: 89006
The Dayco 89006 Idler/Tensioner Pulley - Air Conditioning are superior quality replacement pulleys that are engineered to meet or surpass the factory specifications. This steel pulley is coated with a tough e-coating that is engineered to resist corrosion and wear in harsh environments. With a lifet...
$24.49

Brand: Mevotech Part Number: MS50914
Fits: 2011-2019 Chevrolet Silverado 2500HD/3500HD SUPERIOR TOUGHNESS: Get longer-lasting performance from patented sintered bearings. SIMPLE TO SERVICE: Make servicing a snap with the SAE grease fitting included. RESISTS CORROSION: Prevent rust build up and increase longevity with protecti...
$62.58

Brand: Cognito Part Number: 90772
Fits: 2011-2023 GM 2500HD/3500HD 2WD/4WD This Cognito 90772 Pitman & Idler Arm Support Kit is the perfect component for your GM 2500HD/3500HD 2WD/4WD. This kit helps with the strength and geometry of steering system. This kit also stops the forward and rearward motion of the center-link ...
$259.95

Brand: Pacific Performance Engineering Part Number: 158040111
A failed idler arm pivot assembly can make your steering feel loose and washy. Ultimately, it can contribute to the premature wear of your tires and steering linkage. If your truck is lifted, with larger wheels and tires, this effect can be even more profound. The PPE Extreme-Duty Forged Idler Arm A...
$224.99

Brand: Cognito Part Number: 110-90772
Pitman and Idler arms have been an inherent wear problem within the steering systems of Chevy and GMC trucks and SUVs for decades. The Cognito PISK (Pitman and Idler Arm Support Kit) replace the problem components that plague factory and aftermarket steering systems on several models and years of G...
$259.95

Brand: Dorman Products Part Number: 419-605
Direct replacement idler pulley for 94-03 Ford 7.3L Powerstroke by Dorman. Part number: 419-605...
$22.29

Brand: Dayco Part Number: 89096
Fits: 1995-1997 Ford F-250/350 7.3L Powerstroke, 1999-2003 Ford F-250/350/450/550 7.3L Powerstroke, 2003-2007 Ford F-250/350/450/550 6.0L Powerstroke (Without AC), 1995-1997 Ford Econoline 7.3L PowerstrokeThis Dayco 89096 Idler/Tensioner Pulley-A/C Bypass-Grooved are high quality pulleys that are en...
$29.09

Brand: Dayco Part Number: 89016
Fits: 1999-2003 Ford F-250/350/540/550 7.3L Powerstroke, 2003-2007 Ford F-250/350/450/550 6.0L Powerstroke, 2000-2005 Ford Excursion 7.3L/6.0L Powerstroke, 1999-2010 Ford E-350/450 7.3L/6.0L PowerstrokeThis Dayco 89016 Idler/Tensioner Pulley- Main Drive is a high-quality OE-style replacement that fa...
$22.14

Brand: Dorman Products Part Number: 419-612
Direct replacement idler pulley for 99-03 Ford 7.3L Powerstroke by Dorman.Part number: 419-612...
$16.51

Brand: Dayco Part Number: 89053
Direct replacement idler/ tensioner pulley  for the below applications by Dayco99-03 Ford 7.3L Powerstroke Dual Pulley03-07 Ford 6.0L Powerstroke Single Alternator00-05 7.3L/ 6.0L PowerstrokeCross Reference numbers: 38053, 38053, APV2965, 231053, 3C2E-6B209-AB, F65E-6B209-AB, F65E-6B209-BB...
$28.36

Brand: Pacific Performance Engineering Part Number: 158040100
A failed idler arm pivot assembly can make your steering feel loose and washy. Ultimately, it can contribute to the premature wear of your tires and steering linkage. If your truck is lifted, with larger wheels and tires, this effect can be even more profound.  The PPE Forged Idler Arm Assembly...
$224.99

Brand: Dayco Part Number: 89007
The Dayco 89007 Idler/Tensioner Pulley are superior quality replacement pulleys that are engineered to meet or surpass the factory specifications. With double high temperature seals and lifetime lubricated ball bearings, this pulley will deliver peak bearing performance. This steel pulley is coated ...
$20.37

Brand: Dayco Part Number: 89048
Direct replacement idler/ tensioner pulley (smooth pulley) by Dayco Applications 93 Dodge Ram 5.9L Cummins 94-02 Dodge Ram 5.9L Cummins 94-97 Ford F250/ F350 7.3L Powerstroke 99-03 Ford F250/ F350/ F450/ F550 7.3L Powerstroke 00-03 Ford Excursion 7.3L Powerstroke Cross referenc...
$30.04

Ford 6.7L Powerstroke Dayco Idler/Tensioner Pulley - Upper (See Desc)
Backordered
Brand: Dayco Part Number: 89839
Backordered with No ETA   **Updated on 05/31/2024** Fits: 2011-2019 Ford F-250/350 6.7L Powerstroke (Without AC) 2011-2016 Ford F-450/550 6.7L Powerstroke (Without AC) The Dayco 89839 Idler/Tensioner Pulley - Upper are high quality pulleys that are engineered to meet or exceed...
$65.94

Brand: ProForged Part Number: 102-10033
Fits: 2001-2010 GM Silverado/Sierra 2500HD/3500HD, 2003-2011 GM Express/Savana 2500/3500 Van, 1999-2004 GM Express/Savana 4500 VanRestore the steering function in your vehicle with the ProForged Idler Arm Bracket Assembly. This idler arm bracket has gone through in-depth end-of-line testing to ensur...
$71.39

Brand: Zumbrota Drivetrain Part Number: ZMNV22657
97+ Dodge NV4500 Bottom Cluster/Countershaft with 1.5" Reverse Idler Old Part number: NV22657 Part Number: ZMNV22657...
$240.89

Brand: Kryptonite Part Number: KR280
Fits; 2011-2021 2500/3500 GM HD TruckPart# KR280CLICK HERE FOR COMPLETE INSTALLATION INSTRUCTIONSThis Hard Core Idler arm support with roller bearings is the latest and greatest from Kryptonite Products. It provides steering improvements and reduced play and looseness on most Chevy / GMC Heavy Duty ...
$227.99

Brand: Kryptonite Part Number: KRISP11
Fits; 2011-2021 Chevy/GMC 2500/3500 HD TRUCKMost of the play in the steering system on Heavy Duty GM Trucks is on the Idler side, this package will decrease play in the Idler side and solidify your steering feel. This combination of parts will bullet proof you idler side steering.Includes:1 x K...
$522.49

Brand: Pacific Performance Engineering Part Number: 158040000
Discontinued (4/18/24) The PPE 158040000 Idler Arm Idler Arm gives your 2001-2010 GM 2500HD/3500HD steering system an anchor and a strong base so that it can live up to the specific needs of a race vehicle. It is perfect for those who have added larger wheels, more horsepower or use their vehicle...
$0.00

Showing 1 to 35 of 35 (1 Pages)