-80x80.jpg)
Brand: Alliant Power
Part Number: AP0166
The Alliant AP0166 Turbocharger Installation Kit gives you the required gaskets and seals to replace or upgrade the turbocharger on your 2011-2014 Ford 6.7L Powerstroke.
Features:
Turbo Gaskets & Seals
Pedestal to Block Gasket
Pedestal to Turbo Gasket
New T...
$100.47
Brand: AFE
Part Number: 46-20280AA
**Fitment Note** Fits AFE Intercooler Kit OnlyReinforced Silicone:These coupling hose features 5-PLY reinforced high temperature material which meet or exceed SAEJ20 Standard.Coupling Hoses:Allow for expansion, movement, and extreme vibration between two hard pipes while reducing the possibility of ...
$310.00
Brand: AFE
Part Number: 46-20280AS
**Fitment note** Fits AFE 46-20284-B Intercooler Pipes OnlyReinforced Silicone:These coupling hose features 5-PLY reinforced high temperature material which meet or exceed SAEJ20 Standard.Coupling Hoses:Allow for expansion, movement, and extreme vibration between two hard pipes while reducing the po...
$310.00
Brand: Aftermarket Parts
Part Number: CLA000321
V-band assemblies are the most versatile and reliable way to connect your exhaust components. With V-band assemblies, you achieve the flexibility to install and swap your exhaust parts easily while maintaining the sturdiness and leak-proofing of a welded exhaust.These 304 stainless steel V-band clam...
$55.99
Brand: Aftermarket Parts
Part Number: CLA000315
These 304 stainless steel V-band clamps are designed for clamping exhaust components together.Please Note: By popular request, these clamps have been renumbered. These used to be our 4.0" clamps and were numbered based on outer diameter of the rings they were built to clamp. As of September 29 2008 ...
$20.00
New
Brand: S&B Filters
Part Number: 83-2012
New boot kit to replace the Ford discontinued the factory intake boot on F250 & F350 trucks.
Built to last a lifetime.
S&B Intake boot is made with 4 plies of aramid reinforcement and extremely strong silicone rubber to last the lifetime of your vehicle. The boot replaces the fai...
$39.00
Brand: Magnaflow
Part Number: 15450
Fits: 1998-2002 Dodge Ram 5.9L Cummins45.25" length. 4 Inch DiameterThe MagnaFlow Dodge Turbo Downpipe 15450 is a 4in. diameter mandrel bent stainless steel pipe designed to connect near your turbocharger and i's weight-optimized with superior flow characteristics and performance. Each performance p...
$193.00
Brand: Grand Rock
Part Number: WFC-4SS
This clamp features a welded flap design to prevent leakage at the closing point, it features .030" gauge 304 stainless steel. Includes grade 8 reversible hardware for one hand tightening.
Clamp dimmensions: 4" X 3" Wide
Part number: WFC-4SS
...
$17.17
Brand: Vibrant Performance
Part Number: 2795
Vibrant 3" Stainless Steel T-Bolt Clamps (Pack of 2)
Clamping range: 3.28" - 3.60"
Part number: 2795
...
$15.29
Brand: Scheid Diesel
Part Number: 154SS INJLINES
Stainless Steel oversized fuel injection lines.
Lines sizes are .078" through .120"
To upgrade to the lines clamped as pictured, select the STK option & add $175. More clamps will help reduce breakage issues. This option includes several additional braces & clamps to secure t...
$631.08
-250x250w.JPG "94-98 Dodge 5.9L 12 Valve Cummins Steel Oversized Fuel Injection Line Kit- Pre-Bent")
Brand: Scheid Diesel
Part Number: 154 INJLINES
Mild steel fuel line set for 12 valve Dodge, pre-bent and custom fit in house to assure first time fit. Line set is pre-clamped. Price is per set of six lines.
Lines sizes are .078" through .093" (.120" lines are only available in stainless steel)
We do recommend painting these ...
$541.72
New
Brand: Garrett
Part Number: 702302-0002
Manufacturer: Garrett, so you know you're getting OEM quality.
Part Number: 702302-0002
Compatibility: Fits 1999.5-2003 Ford 7.3L Powerstroke engines
Includes: O-Ring Seals, bolts, and EBV rod clip
Easy Installation: Designed for seamless installation on the stock pedestal
Reliable Op...
$47.66
New
Brand: Alliant Power
Part Number: AP0221
This Alliant Power Turbo Installation Kit for 2011-2019 6.7L Ford Powerstroke is an upgrade to the AP0156 installation kit. With this new kit, support has been extended up to the 2019 models. This turbocharger installation kit is precision crafted to OE equivalent standards to deliver on a seamless,...
$193.85
Brand: Diamond Eye
Part Number: 445031
Use this Diamond Eye exhaust hanger clamp to secure your tailpipe for all driving conditions. These Diamond Eye exhaust hangers are made from High quality steel and stainless steel in a natural finishDiamond Eye part number: 445031...
$10.97
Brand: Diamond Eye
Part Number: VC400hX40
This v-band clamp to be used with Hx40 flange, part # VC400hX40
...
$40.63
Brand: Mopar
Part Number: 5159965AA/5174049AA
03-07 Dodge 5.9L Cummins Turbine Housing to Cast Iron Elbow V-Band Clamp
Image may not be actual part.
Part numbers: 5159965AA Clamp5174049AA Nut...
$117.68
Brand: Vibrant Performance
Part Number: VIBCLAMPKIT
Description: Stainless Steel T-Bolt Clamps (Pack of 2)
Material: T304 Stainless Steel (including Bolt and Lock Nut)
Warranty: One Year Limited Warranty
Quantity: 2 clamps/pack
...
$14.99
Brand: Diamond Eye
Part Number: 444000
Standard Steel U-Bolt Clamp
Diamond Eye part number: 444000
...
$6.53
Brand: AFE
Part Number: 46-20060AS
Features:
5-Ply polyester reinforced high temp silicone coupling set
Coupler hoses allow for expansion, movement and vibration between two hard pipes
aFe replacement coupling kit
Reinforced Silicone:These couplings features high temperature 5-Ply reinforced silicone material which meet or ex...
$310.00
Brand: Diamond Eye
Part Number: DE-5LAPCLP
Diamond Eye 5" Torca Lap Joint Clamp. Available in aluminized or stainless
Diamond Eye part numbers:
L50AA (Aluminized)
L50SA (Stainless)
IMPORTANT NOTE: Due to varying laws and regulations, most Diamond Eye exhaust systems & components cannot ship to California. T...
$21.14
Brand: Diamond Eye
Part Number: 454000
Zinc Coated U-Bolt Clamp
Diamond Eye part number: 454000
(Price is for 1(one) clamp)
...
$10.23
Brand: Diamond Eye
Part Number: 444003
Standard Steel U-Bolt Clamp
Diamond Eye part number: 444003
...
$9.88
Backordered
Brand: Diamond Eye
Part Number: 455017
Backordered with No ETA **Updated on 09/12/2023**
4" Weld-on Hanger/Clamp
STAINLESS STEEL
Diamond Eye part number: 455017
...
$17.11
Brand: Diamond Eye
Part Number: QC400-6
4" Quick Connect Couplers includes 6 CNC Machined Flanges and 2 V-Band Clamps for connection. These couplers allow you to easily swap out exhaust parts without having to cut or pry parts apart.
Diamond Eye part number: QC400-6
Link to Demo Video
...
$235.71
Brand: Irate Diesel Performance
Part Number: IDP-SDIC
Irate Diesel Performance Intercooler Boot Kit w/Clamps 1999-2003 Ford 7.3L Powerstroke
All boots and clamps needed for stock or aftermarket intercooler systems and turbo systems.
Part number: IDP00253....
$225.00
Brand: Diamond Eye
Part Number: 454003
Zinc Coated U-Bolt Clamp
Diamond Eye part number: 454003
(Price is for 1(one) clamp)
...
$12.00
Brand: PacBrake
Part Number: C11342
Adapter for use with Pacbrake exhaust brake. Must be used when installing a Packbrake Exhaust Brake on a truck with 4" exhaust system. Welding required for installation. Note: InLine exhaust brakes require 2 adapters. 1 for each side.
...
$100.32
Brand: Peak Diesel Performance
Part Number: PK-0307-1-2
DISCONTINUEDApplication: 03-07 Dodge Ram Cummins 5.9L Diesel07.5-2009 6.7L Cummins
Performance Turbo to Intercooler tube connector boot & 2 Clamps. This is the 2 3/4 connector boot that connects from the turbo compressor housing to the intercooler tube on the passenger side.Superior mater...
$0.00
Brand: Alliant Power
Part Number: AP0156
Discontinued (Updated 4/4/2025)
Please see our alternate part AP0221.
Fits: 2011-2014 Ford Powerstroke F-250/350 (Dyno Cert) | 2011-2015 Ford Cab Chassis F-350/F-450/F-550/F-650(Chassis Cert) with the 6.7L Powerstroke Engine
This turbocharger install kit is specifically designed and enginee...
$0.00
Brand: Aftermarket Parts
Part Number: 94158-0378
DISCONTINUED!
3.5" Constant Torque Stainless Steel Intercooler Spring-Clamp
These clamps will fit 3.25 or 3.5 OD boots.
JUST ONE CLAMP.
...
$0.00
Brand: Source Automotive
Part Number: 0609-SA
Discontinued
45 Deg Rubber Reducer Elbow, Use with our Stainless Steel T-bolt Clamps.
This is a non-returnable part
...
$0.00
Brand: Source Automotive
Part Number: 408
Product Unavailable (Updated 11/9/2023)This is a non-returnable part5" V-clamp for HT3B or S400 exhaust outlet. For use with #0406B.
**PLEASE BE ADVISED THERE ARE NO RETURNS ON TWIN TURBO PARTS. NO EXCEPTIONS** ...
$0.00
Brand: Fleece Performance
Part Number: FPE-CUMMINS-S400-DP-03
DISCONTINUED304 Stainless downpipe with Flat "V" flange. Designed to fit in 3rd & 4th generation Ram trucks using a 2nd generation turbo location. May fit other applications. CNC bent for precise fitment.Comes with v-band outlet clamp and a 4" Pre-Formed band clamp.NOTE: Flat "V" is ...
$0.00
Showing 1 to 35 of 35 (1 Pages)