Shop By Category
Your Cart

filter

Brand: Merchant Automotive Part Number: 10479
Replace your rusted, broken, or stripped stock exhaust manifold fasteners with high quality ARP bolts. Their durability and strength stand the test of time. This kit will do both sides of the engine and replaces the OE studs. These high quality fasteners help eliminate any exhaust manifold leaks.Inc...
$84.38

Brand: Merchant Automotive Part Number: 10092
The Merchant Automotive 10092 Torque Converter Bolt Kit are a high-quality replacement for the stripped or snapped converter bolts in your 2001-2016 GM 6.6L Duramax. This converter bolt kit will work with stock and most aftermarket applications.  FEATURES:Quality Tested(6) Bolts IncludedDi...
$13.23

Brand: Merchant Automotive Part Number: 10452
Glow Plug removal can seem straight forward but if the incorrect tools are used, the chances of breaking off the glow plug or damaging the cylinder head are greatly increased. These are the same tools we have used in house at Merchant Automotive.Kit Includes:Air HammerAir NippleGlow Plug Removal Air...
$77.63

Brand: Merchant Automotive Part Number: 10629
Fits: 2001-2019 GM 6.6L Duramax LB7/LLY/LBZ/LMM/LML/L5P (With Allison 1000 Transmission)This Merchant Automotive 10529 Allison 1000 PTO Billet Side Covers replaces the old PTO covers on your 2001-2019 GM 6.6L Duramax LB7/LLY/LBZ/LMM/LML/L5P (With Allison 1000 Transmission). This billet cover gives y...
$74.72

Brand: Merchant Automotive Part Number: 10228
Complete kit, includes all you need to properly plumb your S400 valley mounted turbo in your Duramax Includes :     OE Valley feed block off plug     Adapter fitting for oil galley plug     Adapter fitting for -4 pipe at turbo for oil feed     -6 Turbo oil feed line     -10 T...
$205.63

Brand: Merchant Automotive Part Number: 10170
Dress things up under your hood by deleting your resonator!  Get rid of that big black factory box and replace it with this CNC machined delete plate engraved with the word Duramax!  Crafted with quality engineering from 6061 high grade aluminum, our #10170 LML Turbo Resonator Delete Cap is a nic...
$39.72

Brand: Source Automotive Part Number: T3FL
This is a non-returnable part.  Limited Stock Available.  While Supplies Last.Laser Cut - Spacer plate between exhaust manifold and turbo. This plate is 1/2" steel. This comes with holes for mounting. New extended length studs are required and gaskets. Some turbo applications may require ...
$23.57

Brand: Merchant Automotive Part Number: 10218
The ultimate kit to recondition your fuel filter head assembly.   Includes:   Fuel Filter Head Rebuild Kit Billet WIF Plug Billet Bleeder Screw ...
$59.72

Brand: Merchant Automotive Part Number: 10192
All the seals needed to rebuild your leaking fuel filter head! 2- U Shaped Seals 3- Internal seals 1- Bleeder screw seal...
$19.72

Brand: Merchant Automotive Part Number: 10001
Here is the best upgrade you can make to your GM transfer case(model 136, 146, 246, 261, 261HD, 263HD, 263XHD, 261XHD).  Prevent the ever increasing problem of pump rub.  What is "pump rub"     The GM transfer cases use a gear pump inside the case that is driven off the mainshaft.  The pump...
$77.63

Brand: Merchant Automotive Part Number: 10117
Dont waste time trying to locate all the individual gaskets and seals needed to rebuild your LB7.  Simply order one part number and have it in one box.    This kit does not include any bolts or other torque to yield fasteners ...
$953.68

Brand: Merchant Automotive Part Number: 10186
Fits '01-'07 Allison 4x4 Transmissions.  This support can keep your Allison four wheel drive housing from cracking in the event of a driveline vibration (bad u joint, dented or bent driveshaft). By Merchant Automotive part number: 10186...
$149.63

Brand: Merchant Automotive Part Number: 10010
A faulty bleeder screw can cause a no start concern, a start and dies concern.  Take a look at the pictures and you can see a stock bleeder screw that is leaking and caused a loss of prime situation.  Don't get caught stranded!...
$10.92

Brand: Aftermarket Parts Part Number: 404
This is a non-returnable partHx40 Flange, Sleeve will fit inside 4" exhaust tubing. This is made from steel. This will work with S300 turbos that are machined with an Hx40 style flange. Will require Hx40 V-clamp #0405 to clamp together. **PLEASE BE ADVISED THERE ARE NO RETURNS ON TWIN TURBO PAR...
$43.00

Brand: Merchant Automotive Part Number: 331304A
Heavy duty gasket, will not rip or tear like less expensive gaskets.   Merchant Automotive part #331304A...
$4.92

Brand: Solid Steel Industries Part Number: DSS00409-4
The popular "DSS" steering stabilizer will greatly reduce steering "wander" on your late model Dodge pickup. This unit will serve to eliminate sector shaft play in the steering box which is a large contributor to wandering and poor road feel. It also serves to minimize frame flex at the steering box...
$233.00

Brand: Merchant Automotive Part Number: 10006
Its a tight fit to squeeze a filter wrench around the fuel filter with the newer longer filters.  GM designed a step in the bottom of the can to help with the problem, but its still very tight, especially with the wires routed close to it. After being frustrated with this, We developed a rather ...
$14.86

Brand: General Motors Part Number: 98002804
Replacement exhaust to head gasket for 01-16 DuramaxGM Part Number: 98002804...
$44.28

Brand: Merchant Automotive Part Number: 10184
Anytime an engine is used for higher RPM then stock or higher boost levels, there is a tremendous amount of stress on the pushrods, add an aftermarket cam with higher lift and some heavy duty valve springs and they are simply not sufficient.  Install our heavy duty pushrods that are made to the...
$318.73

Brand: Source Automotive Part Number: 407K
DiscontinuedThis is a non-returnable partThis part is jigged and welded. You'll get a 5" V-Band Clamp and a 5" Seal Clamp for install. **PLEASE BE ADVISED THERE ARE NO RETURNS ON TWIN TURBO PARTS. NO EXCEPTIONS**  ...
$0.00

Brand: Source Automotive Part Number: SA-INTRCLR3.5BOOT
07.5-09 6.7L Intercooler Boot Kit (for 3.5" Intake Tube) comes with 2.75" x 9" tube, 3" Hump Hose, 3.5" Hump Hose, and a 3" to 3.5" reducer with clamps to match. **Image is typical of our boot kits and don't necessarily match your kit** ...
$0.00

Brand: Source Automotive Part Number: 67LTwins
It's ready. It fits. It works. It rocks! One of the best features of the 6.7L engine is the factory exhaust brake. Seems to me most folks don't want to give up this feature. Neither do we. We built our kit around our in house modified, 2nd gen 3-piece center outlet exhaust manifold. Combine the...
$0.00

Brand: Source Automotive Part Number: SA-INTRCLRStockBOOT
The 07.5-09 6.7L Intercooler Boot Kit comes with a 2.75" x 9" tube, 2 3" hump hoses, and 1 3.5" hump hose, as well as the clamps to match. **Image is typical of our boot kits and don't necessarily match your kit**...
$0.00

Brand: Source Automotive Part Number: 2ndGenTwins
Through extensive research & development and a multitude of program changes, Source Automotive has designed their 2nd gen twin turbo kit to allow the use of several different top turbos. Included are the early style HX 35 & common 35 hybrid derivatives, HX 40 & the Schwitzer 300 series. They've ...
$0.00

Brand: Source Automotive Part Number: S400MT
This is a non-returnable part12V S400 Turbo mount to engine. Style varies by year, please provide that info. This is required with our hotpipes. Parts are powder coated. Hardware Kit sold Separately.  Hardware Kit Includes (Year Specific): Oil Pan Bung Epoxy (94-97 Only) O-Ring (98...
$0.00

Brand: Source Automotive Part Number: 430
This is a non-returnable partThese two water lines for your 12V relocate your old lines to new location for twin turbo. **PLEASE BE ADVISED THERE ARE NO RETURNS ON TWIN TURBO PARTS. NO EXCEPTIONS**  ...
$0.00

Brand: Source Automotive Part Number: 0430A
This is a non-returnable partThis line relocates your old line to new location for twin turbo. Comes powder coated. (A new 90 Degree elbow is needed with new plug if you have an automatic transmission.) **PLEASE BE ADVISED THERE ARE NO RETURNS ON TWIN TURBO PARTS. NO EXCEPTIONS**  ...
$0.00

Brand: Source Automotive Part Number: SA140W
Source Automotive is proud to present, our very own line of gauges, with our industry leading TWO year warranty! Source Automotive 2" Dia. white face 140-320 Degree Transmission Temperature Gauge with 1/8" NPT temp senderSource Automotive part number:  SA140W...
$0.00

Brand: Source Automotive Part Number: SAKIT
Source Automotive is proud to present, our very own line of gauges, with our industry leading TWO year warranty! This is the total package, with a Pyrometer, Trans Temp and your choice of 50 or 100 psi boost gauge, and an A-Pillar to mount them in your Dodge truck! ...
$0.00

Brand: Source Automotive Part Number: 0419B
DISCONTINUEDThis is a non-returnable partFully Machined -T3 divided spacer plate we use between turbo & exhaust manifold on some of our kits. This plate is a slightly less than 1/2" steel. Approx .470". Includes non tapped holes for mounting. The two ports are taller than oem and may not s...
$0.00

Showing 1 to 30 of 30 (1 Pages)