-80x80.jpg)
Brand: Merchant Automotive
Part Number: 10382
NOTE: This upgrade kit MAY NOT BE COMPATIBLE with some aftermarket aluminum rear transfer case halves due to the inconsistent manufacturing tolerances seen in them, verify correct fitment prior to installation.
Duramax Diesel Transfer Case Upgrade ...
$110.75
Brand: H&S Motorsports
Part Number: 122004-X
Applications:
Fits all 2011 - 2016 Ford 6.7L Power Stroke **DIRECT REPLACEMENT, NO AFTERMARKET TUNING REQUIRED**
Features
50 State Legal CARB EO #D-880
H&S Motorsports is proud to introduce the Intercooler Pipe Upgrade Kit for the 2011 - 2016 6.7L Ford Powerstroke. This kit...
$299.00
Brand: DmaxStore
Part Number: MAX-OCU-XXX
Max-Flow Duramax Oil Cooler Upgrade Kit
Fits 2001-2007 LB7 LLY LBZ 6.6L Duramax & 2011-2019 LML L5P 6.6L Duramax
The Max-Flow Duramax Oil Cooler Upgrade kit includes an oversized oil cooler that has improved fluid dynamics to take full advantage of the cooling plates within the o...
$565.00
Brand: Merchant Automotive
Part Number: 10057
Duramax Diesel
Transfer Case Upgrade Kit
To repair or prevent pump rub
failure on your Duramax diesel engine transfer case, use this Merchant
Automotive Duramax transfer case upgrade kit with performance transfer case
fluid. This kit will give you everything you need to help...
$100.25
Brand: BD Power
Part Number: 1032160
A major common weak point on Chevrolet/GM HD series trucks is the steering linkage and tie rods with high torque engines, lift kits, and larger tires putting greater strains on the steering system than what OEM intended. These common failures include loose steering, front wheels toe-in under load wh...
$895.95
Brand: BD Power
Part Number: 1032150
Fits: 01-10 GM 2500HD/3500HD 2wd/4wd & 01-07 GM 1500HDA major common weak point on Chevrolet/GM HD series trucks is the steering linkage and tie rods with high torque engines, lift kits and larger tires putting greater strains on the steering system than what OEM intended. These common fail...
$514.95
Brand: BD Power
Part Number: 1032125
Fits: 2001-2010 GM 2500HD/3500HD 2wd/4wd & 2001-2007 GM 1500HD Classic 2wd/4wdThe tie rods are 1.5x thicker than OEM for reduced flex and have larger inner ball joints for reduced wear. Testing has shown the BD tie rods can take over double the amount of force than what OEM rods can handle....
$258.95
Brand: Pacific Performance Engineering
Part Number: 128135105
Fits: 2001-2010 GM 6.6L Duramax LB7/LLY/LBZ/LMMThis C5 clutch improves first gear, reverse and park. Manufacturered to handle heavy-duty towing, is this C5 Clutch Upgrade Kit. This is the strongest C5 clutch kit on the market!Features: 8 Friction Plates8 Kolene SteelsPPE: 128135105...
$269.99
Brand: KC Turbos
Part Number: 300xxx
DIY KITS are meant for those who want to build their own turbo. It is not meant to be just a cheaper option. If you don't feel confident in putting together your own turbo then THIS IS NOT FOR YOU! This will not come with instructions and we will not "walk you through" it. If you are buy...
$499.00
Brand: AVP
Part Number: AVPBSK60
The kit includes all of the O-Rings and hard parts to rebuild the fuel pressure housing.The "Blue Spring" Fuel Pressure Regulator Repair Kit is an easy 30 minute install and will increase your fuel pressure back up to where it should be from the factory. Most 6.0's see an increase of 10-12psi of fue...
$39.99
Backordered
Brand: Dirty Hooker Diesel
Part Number: 700-155B
Backordered with no ETA (Updated 6/3/25)
The DHD 700-155B Super High Flow Fuel Block Upgrade kit eliminates the restrictive factory fuel test-port/fuel block and replaces it with DHD's high flow black anodized aluminum block. This kit is identical to their standard kit except the CP3 fuel supply ...
$119.99
Brand: BD Power
Part Number: 1041520
The Killer Grid Heater Upgrade Kit is purpose-built to address a major flaw in the 6.7L Cummins engine that can result in total engine destruction. The problem lies in the electrical connection to the intake grid heater. When powering the grid heater, 200 amps pass through a small bolt and nut insid...
$201.95
Brand: Banks Power
Part Number: 25965
Fits: 2010-2012 Dodge 6.7L CumminsBanks boost tubes are larger than the factory pipe and designed to work with the stock elbow or new Banks Monster-Ram (3.5" or 4") which will improve airflow, and allow the turbocharger to spool up faster. Banks hot and cold side tubes have up to 65% percent greater...
$389.00
Brand: Banks Power
Part Number: 25998
Increase flow area up to 65% over the stock boost tubes with Banks' huge 3-1/2" boost tubes. Stock consists of a 3" plastic cold side tube and a 2.75" metal hot side tube. Banks boost tubes are both 3-1/2" constant diameter mandrel bent. More air allows for more fuel which means more horsepower.Fitm...
$409.00
Brand: Fleece Performance
Part Number: FPE-PF-FMC-1116-LB
The PowerFlo lift pump is the latest drop-in lift pump from the diesel experts at Fleece Performance! Needing to replace your factory pump or looking to upgrade? This kit includes both the PowerFlo lift pump to replace your in-tank factory sending unit and a new frame mounted filter base with Donald...
$1,099.00
Brand: Fleece Performance
Part Number: FPE-PF-FMC-1116-SB
The PowerFlo lift pump is the latest drop-in lift pump from the diesel experts at Fleece Performance! Needing to replace your factory pump or looking to upgrade? This kit includes both the PowerFlo lift pump to replace your in-tank factory sending unit and a new frame mounted filter base with Donald...
$1,099.00
Brand: H&S Motorsports
Part Number: 121009
2011-2016 Ford 6.7L Lower Fuel Filter Upgrade Kit Change your pesky lower factory fuel filter to a true spin-on style fuel filter. No more plastic...2011-2016 Ford 6.7L Lower Fuel Filter Upgrade KitChange your pesky lower factory fuel filter to a true spin-on style fuel filter.No more plastic housin...
$489.00
Brand: No Limit Fabrication
Part Number: 67UCHKx1xxx
This kit replaces the rubber upper radiator hose on the 2011-2020 Ford 6.7 PowerStroke factory with a stainless pipe, increasing reliability and improving the cosmetic aesthetic, available in raw stainless, black, and polished finishes.
Part numbers: 67UCHKB1116, 67UCHKP1116, 67UCHKR1116...
$449.00
Brand: Banks Power
Part Number: 25994
OEM
replacement for left side boost tube (Driver side, Cold side) with silicone
couplers. 67% greater flow area compared to stock. Better flowing intercooler
tubes results in less boost pressure loss allowing for more air and fuel to be
delivered to your engine resulting in maximum horsepower. M...
$239.00
Brand: Stainless Diesel
Part Number: 67DIYK
6.7 Ford DIY turbo upgrade kitLooking for an affordable turbo upgrade for your 15-19 6.7 Powerstroke? Enjoy getting your hands dirty with DIY projects and looking for some more power? This is the kit for you!Everything you need to upgrade and freshen up your 6.7 turbo into a higher flowing unit is i...
$848.87
Brand: HP Tuners
Part Number: ECM-00-L5P-K
Conveniently upgrade your E41 ECM, found in the 2017+ Chevy Silverado and GMC Sierra 2500/3500 6.6L Duramax trucks (L5P and L5D applications), without removing it from the vehicle. Upgrade your E41 ECM in 20 minutes or less! This ECM upgrade kit enables read, write, and special functions in VCM...
$349.99
Brand: Banks Power
Part Number: 25999
Banks Boost Tubes are the largest charge air cooler pipes in the industry! Featuring a full mandrel bent 3.5" diameter compared to competitors’ 3” or the the stock 2.5" crush-bent tubes. Made of high-quality aluminized steel, Banks Boost Tubes allow for a quicker turbo spool by improving boost p...
$598.50
Brand: H&S Motorsports
Part Number: 121006-xx
The Ultimate Upgrade: Robust & Reliable Fuel Filtration
This kit converts the 2017-2022 6.7 Ford Power Stroke Diesel fuel-tank-mounted (lower) fuel filter to a superior screw-on style Advanced Efficiency CAT or Baldwin water separating fuel filter.
Features:
Metal Drain valve on the ...
$489.00
Brand: Banks Power
Part Number: 26006
Banks massive 3.5" boost tubes are the largest on the market, flowing more air than stock! Smooth mandrel-bent tubes deliver more air to your engine while reducing boost pressure loss resulting in quicker turbo spool and more power.SpecsBanks Boost Tubes are the largest charge air cooler pipes in th...
$475.00
Brand: Banks Power
Part Number: 26006-PC
Fits: 2019-2023 Ram 6.7L Cummins 2500/3500This Banks Power 26006-PC Boost Tube Upgrade Kit will help increase airflow into the engine of your truck. These 3.5" diameter mandrel-bent tubes are manufactured from aluminized steel for maximum strength and durability. The factory intercooler pipes are 2....
$495.00
Brand: Pacific Performance Engineering
Part Number: 115020120
Fits: 2020-2023 GM 6.6L Duramax L5PThis PPE 115020120 Black Turbo Inlet Upgrade Kit replaces the damaged factory intake tube in your 2020-2023 GM 6.6L L5P Duramax. This PPE Intake Tube take the factory resonator out which in turn reduces airflow restrictions and improves the airflow entering your tu...
$179.99
Brand: H&S Motorsports
Part Number: 12101x
2023-2024 Ford 6.7L Power Stroke Lower Fuel Filter Upgrade Kit
This kit converts the 2023-2024 6.7 Ford Power Stroke Diesel fuel-tank-mounted (lower) fuel filter to a superior screw-on style Advanced Efficiency CAT or Baldwin water-separating fuel filter.
Features:
Metal Drain valve on the...
$489.00
Brand: AVP
Part Number: AVPBM6688OBS
Performance turbo upgrade kit transforms your Garrett TP38 turbo by changing the stock compressor wheel increasing it to a 66/88mm. The upgraded billet compressor wheel will reduce surge and add more airflow while spooling up faster. The upgraded compressor housing has a larger 3.5" ported anti-surg...
$374.99
Brand: AVP
Part Number: AVPBSK73
The kit includes all of the O-Rings and hard parts to rebuild the fuel pressure housing & fuel bowl.The "Blue Spring" Fuel Pressure Regulator Repair Kit is an easy 30 minute install and will increase your fuel pressure back up to where it should be from the factory. The added fuel pressure will ...
$49.99
Brand: AVP
Part Number: AVPBM6688
Performance turbo upgrade kit transforms your Garrett GTP38 turbo by changing the stock 60/80mm compressor wheel and increases it to a 66/88mm. The upgraded billet compressor wheel will reduce surge and add more airflow while spooling up faster. The upgraded compressor housing has a larger 4" ported...
$374.99
Brand: Synergy Mfg
Part Number: 8024
Synergy Jeep JK Synergy Long Arm Upgrade KitThe upgrade kit is designed for customers who already have a Synergy Stage 1, 2 or 3 kit that want to upgrade to a Long Arm kit for improved on and off-road performance.The JK Synergy System™ was designed and engineered from the ground up using a synergi...
$3,680.00
Brand: H&S Motorsports
Part Number: 122011
2011-2016 Ford 6.7L Intercooler Pipe Upgrade Kit (OEM Replacement / Silicone Version)
Features
Fits all 2011 - 2016 Ford 6.7L Power Stroke **DIRECT REPLACEMENT, NO AFTERMARKET TUNING REQUIRED**
This 5-ply stainless reinforced silicone hose is engineered to withstand over 100 PSI at 400&de...
$289.00
Brand: H&S Motorsports
Part Number: 122008
Maximum Strength: Intercooler Upgrade for Power Stroke
Features
Fits all 2017-2024 Ford 6.7L Power Stroke **DIRECT REPLACEMENT, NO AFTERMARKET TUNING REQUIRED**
This 5-ply stainless reinforced silicone hose is engineered to withstand over 100 PSI at 400°F!
Direct OEM replacement! No a...
$289.00
Showing 1 to 33 of 33 (1 Pages)