filter

Synergy MFG's Jeep JL / JLU / JT Front Track Bar and Sector Shaft Brace is designed to better distribute the increased load the frame side track bar bracket encounters on a lifted Jeep and supports the steering box sector shaft from excessive deflection. A track bar bracket or steering box failure i...

The Synergy Jeep JL/JLU/JT Front Track Bar relocation bracket is the definitive fix for a lifted JL or JT. When lifting beyond 2” it becomes critical to correct several important areas of the suspension geometry. By raising the track bar mount at the axle side we can simultaneously re-center the a...

Jeep Wrangler JL / JLU / JT Heavy Duty Adjustable Front Track Bar. Adjustable track bars are used to help center your axles when running a suspension lift. This track bar also significantly improves lateral stiffness over stock, and is seen as a required upgrade to eliminate the factory track bar fr...

Jeep JL / JLU / JT Heavy Duty Drag Link Kit. All new design and components specific to the JL / JLU / JT platform. Direct bolt-in replacement for the stock drag link for an immediate upgrade in steering feel, stiffness, and strength. Single Plane Tie Rod End eliminates unwanted Drag Link Flop. You w...

Synergy Dodge Truck Heavy Duty Steering Kit is a larger and stronger, Bolt On replacement for the stock steering. No drilling or reaming of the knuckles is required. It uses the updated factory T-style steering design to eliminate toe-change caused by Y-style steering. Using the factory T-style stee...

The Synergy Long Arm brackets are designed to improve your trucks suspension geometry while off-roading. Shorter control arm angles are hard on a vehicle’s suspension components which leads to poor vehicle handling, limited suspension travel and an overall bumpy ride as the shocks produce a choppy...

A long arm suspension upgrade involves using longer control arms that mount further back on the vehicle in order to reduce suspension angles and bring the truck closer to the stock geometry. The Synergy Front Lower Control Long Arms are adjustable to allow for caster correction and re-centering of t...

A long arm suspension upgrade involves using longer control arms that mount further back on the vehicle in order to reduce suspension angles and bring the truck closer to the stock geometry. The Synergy Front Upper Control Long Arms are adjustable to allow for caster correction and re-centering of t...

Part 4123 on Backorder with No ETA  **Updated on 08/26/2024** After 5 years of development and over 100,000 test miles our Heavy Duty Adjustable Ram Ball Joints are here! This is the last set of ball joints you will ever have to buy. Limited Lifetime Warranty. Tighten up your steering for go...

New and Improved Jeep JK Wrangler Heavy Duty Drag Link. Improving upon the success of our previous 8001 JK Drag Link, this version is larger in size and strength and prevents unwanted Drag Link Flop. You will not find a better drag link on the market!Fits:  2007-2018 Jeep Wrangler (JK)Benefits:...

Synergy Jeep JK Front Long Arm Frame Brackets (Pair)Features: Laser cut from 3/16" steel & 2 stage powdercoat finish for maximum strength and durabilitySuspension components feature an abrasion-resistant powder coat finish for maximum durability and corrosion resistance100% bolt on componen...

Synergy JK front Sway Bar Links100% bolt on components assures an easy, trouble free installation with the use of basic hand toolsSpherical bushing at axle side minimizes bindSealed rod end at sway bar end for smooth operationSway Bar Links are made from 11/16" solid 1018 steel and are clear zinc pl...

Synergy Jeep JK Heavy Duty Front Lower Control Arm Frame BracketReplaces the weak factory front lower control arm mounts on the frame which often get destroyed from wheeling.Laser cut & CNC formed from high strength 3/16" steelDesigned to locate control arms in the factory location.Built in lowe...

Suspension components feature an abrasion-resistant powder coat finish for maximum durability and corrosion resistanceMade from high quality crush resistant 2" X .25 Wall 1026 DOM tubingArms are designed and manufactured to maximize ground clearanceThe arms will allow the use of OEM wheels with larg...

Synergy Jeep JK Rear Long Arm Frame Brackets (Pair)Features:Laser cut from 3/16" steel & 2 stage powdercoat finish for maximum strength and durabilitySuspension components feature an abrasion-resistant powder coat finish for maximum durability and corrosion resistance100% bolt on components assu...

Synergy Billet Aluminum Sway Bar Relocation BracketDesigned to move the sway bar down 1" and back 1-7/16" for added clearance when using 8086 JK Rear Long Travel Upper Shock MountCan be used in other large diameter shock applications where additional clearance is needed from sway-bar.Bolt ...

Synergy Extended Jeep JK Rear Shock Mount KitManufactured from laser cut 3/16" steel and CNC bent for superior durabilityMoves lower shock mounts up and out of harm's wayRelocates shock mount for increased ground clearanceAdjustable to .28", 1.09", 1.91" higher than stockStock shock mounts are prone...

Synergy Rear Sway Bar LinksSpherical bushing at axle side minimizes bindHigh quality rod end reduces bushing deflection causing the swaybar to operate more efficientlyEasy installation using stock mounting hardwareSway Bar Links are made from 11/16" solid 1018 steel and are clear zinc plated for max...

The Synergy Jeep JK / JKU Rear Track Bar Brace is designed to distribute the increased load the frame side track bar bracket encounters on a lifted Jeep. This completely bolt on brace is perfect if you have a ovalized track bar bracket bolt hole.Fitment:2007-2018 Jeep JK / JKUFeatures:Laser cut a...

Factory Replacement Inner Axle Seals for the Jeep JK Front D30/44 Axle Housing and TJ/LJ 03-06 D30/44 Axle HousingKit Includes:(2) Seals Per Kit - Recommended for customers who install Synergy Inner Axle Sleeves (8012-01/09)Synergy: 8009-13...

Part #Descriptions8009-01Jeep JK Front Axle HD Track Bar Bracket, 3.0" OD Tube8012-13Jeep JK HD Weld-On Front Track Bar Bracket, 2.5" Axle TubeFeatures:Compatible with all lift heights, bracket can be trimmed for track bar bracket heights from stock, 1", 2" +3" over stock heightIncludes additional t...

Synergy Jeep JK Front D30/44 Inner C Gusset KitFeatures:Synergy Jeep JK D30/44 Inner C Upper & Lower Gusset KitDesigned to be welded to the front C-Yokes of the Jeep JK D30 or 44 axleBrackets are laser cut and CNC bent from 3/16" high strength carbon steelHeavy duty 3 sided construction provides...

Jeep Wrangler JK Heavy Duty Adjustable Front Track Bar. Adjustable track bars are used to help center your axles when running a suspension lift. This track bar also significantly improves lateral stiffness over stock to hold up to the abuse of large tires and aggressive off road driving. Length is a...

Synergy Rear Long Travel Upper Shock Mount Relocates upper shock mount up 2" and back 2.50" Allows the use of a longer rear shock for more travel, or to regain lost up travel when moving lower shock mounts up for improved ground clearance Designed to be used in conjunction with 80...

After 5 years of development and over 100,000 test miles our Heavy Duty Adjustable Jeep JK Ball Joints are here! This is the last set of ball joints you will ever have to buy. Limited Lifetime Warranty. Tighten up your steering for good with our patent-pending (# 16/020894) design which is fully adj...

Synergy Front Upper Control Arms for 2Door & 4Door Jeep JKsSuspension components feature an abrasion-resistant powder coat finish for maximum durability and corrosion resistanceMade from high quality crush resistant 1 3/8" X .188 Wall 1026 DOM tubingFeatures OEM style fork end so the existing bu...

Compatible with 3.0" and taller liftsHeavy duty front track bar bracket for the Jeep JKThis bracket raises the vehicle's axle side track bar mount by 3.0"The vehicle's rollcenter is raised, reducing body roll and dramatically improving overall handlingSpecial bolt-on design strengthens the factory m...

Heavy duty tie rod for Jeep JK WranglersBent similar to factory bar to clear sway bar mountsNow made from 1-1/2" x .188 wall 4130 Chromoly and Heat Treated for maximum strength - over 200% stronger than stock tie rodSynergy Double Adjuster Sleeve: allows adjustment of tie rod length without removing...

Rear lift coils for 2-Door and 4-Door Jeep JK WranglersSynergy coils offer excellent off road performance while preserving ride qualityProgressively wound; keeps spring from coming unbound at suspension droop*Progressively wound spring eliminates annoying spring clanking found on most suspension kit...

Bent to clear most aftermarket differential coversRetains factory track bar mounting bolts & hardwareMade from high quality 1.50 inch x .250 wall DOMAllows centering of rear axle when running a suspension liftSuspension components feature an abrasion-resistant powder coat finish for maximum dura...

Ram Heavy Duty Tie Rod. All new design and components specific to the new radius arm Ram Truck platform. Direct bolt-in replacement for the stock tie rod for an immediate upgrade in steering feel and strength. No wheel size requirements! Can be installed on a stock Ram with stock wheels and tires. T...

Unleash the full potential of your 2014+ Ram 2500 with the Synergy Stage 1 Suspension System. Designed for the toughest terrains, this kit delivers superior off-road performance and handling. Precision-engineered components provide increased articulation, allowing you to conquer obstacles with ease....

Unleash the full potential of your 2014+ Ram 2500 with the Synergy Stage 1 Suspension System. Designed for the toughest terrains, this kit delivers superior off-road performance and handling. Precision-engineered components provide increased articulation, allowing you to conquer obstacles with ease....

Synergy Jeep JL / JLU / JT Adjustable Front Upper Control Arms are a Heavy Duty upgrade for the stock fixed length JL / JLU / JT control arms. They are adjustable to allow for correcting pinion angle and re-centering of the front axle housing for oversize tires and increased ride heights. Our Double...

Synergy Jeep JL / JLU / JT 4130 Heat Treated Chromoly Tie Rod. All new design and components specific to the JL / JLU / JT platform. Direct bolt-in replacement for the stock tie rod for an immediate upgrade in steering feel, stiffness, and strength. No wheel size requirements! Can be installed on a ...

The Synergy Jeep JK / JKU / JL / JLU / JT Stabilizer Mount Stud replaces the front axle side track bar bolt and includes a low profile stud for mounting the steering stabilizer.Fits:07-18 Jeep JK / JKU Wrangler18+ Jeep JL / JLU Wrangler20+ Jeep JT GladiatorBenefits:Moves steering stabilizer up and o...

These CNC machined steering stabilizer clamps are designed to mount any steering stabilizer utilizing a 1/2" mounting bolt to a 1-3/8", 1-1/2", 1-5/8", or 1-3/4" diameter tie rod or drag link. These are for steering stabilizers only and are not intended for use with hydro assist.Fitment:Factory Jeep...

Ram Heavy Duty Adjustable Front Track Bar for 14+ 2500 and 13+ 3500 4x4 trucks. Adjustable track bars are used to help center your axles when leveling the truck or running a suspension lift. This track bar significantly improves lateral stiffness over stock and is considerably stronger than stock to...

Synergy radius arm drop brackets improve ride quality by lowering the radius arm mounting locations at the frame to maintain factory front suspension geometry for leveled and lifted trucks. Flip-able cam spacers in the drop brackets allow the user to run the axle 1/2 inch forward for leveled trucks ...

The Synergy Ram Truck Leveling System levels the stance of the truck and significantly improves ride quality and control with no loss in towing capacity. Proprietary Synergy Tuned Fox shocks have been paired with matched coil springs to create a system that significantly outperforms the competition....

Synergy Jeep JL / JLU Rear Sway Bar Links are adjustable and longer than stock, our spherical bushings and sealed rod ends allow full articulation on lifted vehicles. Compatible with stock wheels when used with Synergy 8886-02 Rear Sway Bar Drop Brackets.Fits:18+ Jeep Wrangler JL18+ Jeep Wrangler JL...

Synergy MFG's Jeep Wrangler JL / JLU Rear Track Bar Brace is designed to better distribute the increased load the frame side track bar bracket encounters on a lifted Jeep.Fits:2018+ Jeep Wrangler JL / JLU (Does not fit 392 models) Benefits:Prevents frame side track bar bracket from failing when...

Introduced in our Stage 1 Suspension System for the Jeep JL / JLU, this track bar relocation bracket is an integral part of the system and contributes to improved handling and reduced body roll. In addition, it prevents interference limitations due to the increased wheel travel available with Synerg...

Jeep Wrangler JL / JLU Heavy Duty Adjustable Rear Track Bar. Adjustable track bars are used to help center your axles when running a suspension lift. Considerably stronger than stock to hold up to the abuse of large tires and aggressive off road driving. Length is adjustable on the vehicle to make a...

Drag Link is bent to clear factory axle brackets and is compatible from stock to 6" lifted vehicles. (Vehicles over 6" of lift will require a drop pitman arm for compatibility)Synergy Double Adjuster Sleeve: allows adjustment of Drag Link length without removing it from the vehicle.Suspension compon...

Synergy Adjustable Front Lower Control Arms are a Heavy Duty upgrade for the stock Dodge Ram control arms. They are adjustable to allow for caster correction and re-centering of the front axle housing for oversize tires and increased ride heights. Our Double Adjuster Assembly allows adjustment of co...

These stepped cam bolt eliminators are designed specifically for use with our Dodge front lower control arms featuring Dual Durometer Bushings (DDB). These will also work with control arms featuring stock style Clevite bushings. The stepped cam bolt eliminators take the place of the stock cam bolts,...

These multi-rate design springs have a softer initial rate which prevents the spring from coming loose in the coil tower, even with long travel shocks. Springs are proudly manufactured in the United States of the highest quality steel. Springs are designed to be able to set solid (fully collapse) wi...