-80x80.jpg)
Brand: DmaxStore
Part Number: DMAX-FHS
DmaxStore Fuel Filter Head SpacerFits 2001-2016 Chevy / GMC 2500HD / 3500HD Part# DMAX-FHSGM made it a rather difficult to fit a filter wrench around the fuel filter. Dmaxstore came up with a solution to this problem by developing a 3/8" aluminum spacer to create more space between the fi...
$12.99
Brand: Industrial Injection
Part Number: PDM-07184
The Industrial Injection PDM-07184 Rocker Arm Spacer Kit can help improve the reliability of the valvetrain in your 2001-2016 GM 6.6L Duramax. This rock arm spacer kit removes the springs in between the rockers that are design to keep the rockers aligned under high load or high RPMs. The stock sprin...
$214.78
-10 %
Brand: Ford Motorcraft
Part Number: 8x 3C3Z-9A461-AA
Fits: 2003-2007 Ford 6.0L Powerstroke
The Ford exhaust manifold spacers (set of 8) is a direct replacement for the old, damaged hardware in your 2003-2007 Ford 6.0L Powerstroke. Using genuine OE hardware provides you with a perfect, factory fit and finish. (8) spacers required per manifold,...
$13.56 $15.07
Brand: Banks Power
Part Number: 19249-2
Fits: 2014-2018 Dodge 2500 (Equipped W/ Banks RAM-Air Differential Cover) If you require more clearance between the Diff Cover and your rear sway bar, the Banks Sway Bar Spacer Kit is what you need. Simple bolt-on application. Does not require modification to the vehicle's axle or sway bar.Prev...
$39.00
Brand: S&B Filters
Part Number: 82-1000
The L5P's stock setup leads to a ton of soot buildup on the MAP sensor over time. This requires constant cleaning. Their MAP Sensor Spacer, once installed, significantly decreases the amount of soot buildup so you have one less thing to worry about.S&B: 82-1000...
$69.00
Brand: Fleece Performance
Part Number: FPE-L5P-MAP-SPR
All new Fleece Performance MAP sensor spacer with boost reference port for the L5P Duramax.
Problem: Because of the direct placement of the MAP sensor into the intake air stream from the factory, soot buildup becomes an ongoing maintenance problem. This requires the sensor to be routinely c...
$68.99
Brand: ReadyLIFT
Part Number: 66-1910
Fits: 2019-2020 Ram 2500 4WDThis Readylift 66-1910 1.0" Rear Coil Spring Spacer Kit offers 2019-2020 Ram 2500 4WD owners the perfect solution for when you need a little extra lift in the rear for towing or hauling. The 1-inch tall rear coil spring spacers are easy to install and are designed to fit ...
$149.00
Brand: S&B Filters
Part Number: 82-1006
Protect your Ford Powerstrokes MAP sensor from dirty exhaust gas and sticky oil buildup with the S&B MAP Sensor Spacer. It safely relocates your sensor out of the way of a contaminated air stream. A clean sensor maintains accurate measurements, resulting in consistent power and optimized fuel ec...
$69.00
Brand: Wagler Competition Products
Part Number: WCPD6720
2019+ Cummins Lifter Modification Kit
Includes Lifter Spacers, Pushrods, & OE Adjustable Rockers
(Utilizes factory lifter body by adding solid spacer into hydraulic portion)
Wagler: WCPD6720
...
$1,400.00
New
Brand: Fleece Performance
Part Number: FPE-L5P-MAP-SPR-24
All new Fleece Performance MAP sensor spacer for the secondary MAP sensor on the 2024-2025 L5P 6.6L Duramax. Because of the direct placement of the MAP sensor into the intake air stream from the factory, soot buildup becomes an ongoing maintenance problem. This requires the sensor to be routinely cl...
$68.99
Brand: South Bend Clutch
Part Number: NV4500STARTERSPACERWBOLTS
The kit from South Bend allows for use of existing 5 Speed NV4500 starters and NV4500 transmissions with an NV5600 flywheel, this is typically used with NV4500 dual disc clutches. This spacer is required for correct spacing so the ring gear will make contact with the starter. Without the spacer, pro...
$45.29
Brand: XDP Mfg
Part Number: XD539
Fits: 1998.5-2018 Dodge Ram 5.9L/6.7L Cummins
The Exhaust Manifold Bolt and Spacer Hardware Kit XD539 is an ideal add-on when you're installing a new exhaust manifold on your truck. Don't risk re-using the factory hardware that has seen countless heat cycles, is corroded, and often stripped or roun...
$69.95
Brand: Synergy Mfg
Part Number: SYNHCWSx
The Synergy Hub Centric Wheel Spacers allow you to increase the offset of your wheels to match larger tires on a lifted vehicle without the full cost of new wheels. They increase the clearance on your axle to allow for some aftermarket upgrades such as larger steering arms. They also help restore co...
$110.00
Brand: Synergy Mfg
Part Number: 8858-x0
When lifting the vehicle, either through tire size or suspension lift, the axle travel needs to be limited to prevent the possibility of tire interference. These rear bump stop spacers provide a solution to this interference problem by limiting the axle travel toward the frame.Fits:Jeep Wrangler JK ...
$150.00
Brand: Synergy Mfg
Part Number: 8057-10
Synergy’s Snap-Lock Bump Stop Spacer System is a set of stacking bump stop spacers adjustable from 2-4 inches of bump stop spacer height. These can be used on the front or rear of the vehicle. When upgrading to larger tires, the distance between the tire and fender decreases and will translate int...
$85.00
Brand: Synergy Mfg
Part Number: 801x-x75
Synergy Jeep JT / JL / JLU / JK / JKU Coil Spring Spacers
Coil spring spacers are available in 3/4" and 1 3/4" sizes
Manufactured from high density polyurethane
Spacers maintain factory ride quality
Spacers install on top of the stock spring
Coil spring spacers are only avail...
$65.00
Brand: PacBrake
Part Number: HP10152
For lifted vehicles with Pacbrake AMP Air Springs
Pacbrake's 2" air suspension spacer kits allow lifted trucks the use of air spring while still keeping them at their desired height.
Made of high quality carbon steel and plated in sleep black zinc protective coating, Pacbrake's spacers ha...
$123.29
Brand: PacBrake
Part Number: HP10154
For lifted vehicles with Pacbrake AMP Air Springs
Pacbrake's 4" air suspension spacer kits allow lifted trucks the use of air spring while still keeping them at their desired height.
Made of high quality carbon steel and plated in sleep black zinc protective coating, P...
$136.98
-10 %
Brand: Position 1 Performance
Part Number: P1PSDMAPSPC
Made in the USA out of billet aluminum
Drastically reduces the issue of soot building up on the sensor
Installs in minutes
P/N: P1PSDMAPSPC
...
$50.20 $55.76
Brand: BD Power
Part Number: 1045982
Replace the broken or stretched exhaust manifold bolts on your 1998.5-2018 Dodge 5.9L/6.7L Cummins with the BD-Power 1045982 Exhaust Manifold Bolt & Spacer Hardware Kit. The exhaust spacers are black oxide coated and allow the fasteners to stretch without fracture or permanent yield. This exhaust ma...
$93.95
Brand: Fleece Performance
Part Number: FPE-T4PED-SPACER1.0
This black 1.0in T4 Pedestal Spacer is designed for use with T4 Turbos installed on Duramax engines when an extra inch of elevation out of the valley is required, although it could be used in any T4 application.
NOTE: A T4 gasket should be used on the top and bottom of the spacer to provide...
$99.74
-10 %
Brand: Cummins
Part Number: 3914284
Spacer for lift pump on Dodge 1994-1998.5 12 Valve Cummins. Used when removing the fuel heater.
Cummins part number: 3914284...
$17.28 $19.20
Brand: Fleece Performance
Part Number: FPE-T4PED-SPACER1.5
This black ceramic coated 1.5in T4 Pedestal Spacer is designed for use with T4 Turbos installed on Duramax engines when an extra inch of elevation out of the valley is required, although it could be used in any T4 application.
NOTE: A T4 gasket should be used on the top and bottom of the spacer t...
$119.74
Brand: Stainless Diesel
Part Number: T3SP
T3 Spacer Plate
1" thick, divided spacer. Machined from mild steel. Mounting holes are non-threaded.
Thread size is M10 x 1.5 when ordering the mounting hardware option.
Stainless Diesel part number: T3SP
...
$52.49
Brand: Stainless Diesel
Part Number: T4SP
T4 Spacer Plate
1" thick, divided spacer. Machined from mild steel. Mounting holes are non-threaded.
Thread size is M10 x 1.5 when ordering the mounting hardware option.
Stainless Diesel part number: T4SP
...
$69.51
Brand: Source Automotive
Part Number: T3FL
This is a non-returnable part. Limited Stock Available. While Supplies Last.Laser Cut - Spacer plate between exhaust manifold and turbo. This plate is 1/2" steel. This comes with holes for mounting. New extended length studs are required and gaskets. Some turbo applications may require ...
$23.57
Brand: Scheid Diesel
Part Number: VP44toP7100Lines
Kit Includes
Lines, Clamped Together
Gaskets & Bolts
Mild Steel available in:
.078
.084
.093
Stainless Steel Available in:
.093
.120
Please allow 5-10 Business Days for shipping, we build these kits on demand.
Clamp configuration may var...
$721.69
-10 %
Brand: Ford Motorcraft
Part Number: 3C3Z-9S425-AAx16/3C3Z-9A461-AAx16
16 - Exhaust Manifold Bolts with spacers set
2003-2007 Ford 6.0L Powerstroke Diesel
Ford part number: 3C3Z-9S425-AA, 3C3Z-9A461-AA...
$56.26 $62.51
-10 %
Brand: Cummins
Part Number: 3945252
Cummins part number 3945252.
Price is for single spacer only.
...
$9.25 $10.28
Brand: VALAIR Clutches
Part Number: V2151
Allows the use of the 5 Speed Starter Motor and NV4500 Transmission with a NV5600 6 Speed FlywheelUsed with Valair NV4500 Dual Disc kits...
$70.53
Brand: Zumbrota Drivetrain
Part Number: ZMNV18873K
NV4500 & NV5600 Isolator Plate (Shift Tower Bushing & Spacer Set)
Includes:
1 Spacer
4 Shift Tower Bushings
Old Part Number: 18873KPart Number: ZMNV18873K...
$18.89
Backordered
-10 %
Brand: Cummins
Part Number: 3949KIT
Backordered with No ETA (Updated on 4/25/2025)
Kit comes complete with:
Starter spacer
Bolts (3)
Cummins Part #'s: 3946085, 3949583
Bolts only options select below (part #3946085 x 3)
...
$156.74 $174.16
Brand: Stainless Diesel
Part Number: WGSP
Fits the S300 Cast Iron Exhaust Housing.Spacer plate that allows more total flow through the internal wastegate to more accurately regulate boost on a single turbo application.In a Twin or Compound turbo application it allows more total flow to the primary or 'large' turbo to help achive split perce...
$30.31
-10 %
Brand: Ford Motorcraft
Part Number: 3C3Z-9S425-AA/3C3Z-9A461-AA
2003-2007 Ford 6.0L Powerstroke Diesel Exhaust Manifold Bolt with spacer
Ford part number: 3C3Z-9S425-AA, 3C3Z-9A461-AA...
$4.39 $4.88
Brand: Merchant Automotive
Part Number: 10006
Its a tight fit to squeeze a filter wrench around the fuel filter with the newer longer filters. GM designed a step in the bottom of the can to help with the problem, but its still very tight, especially with the wires routed close to it. After being frustrated with this, We developed a rather ...
$21.97
Brand: XDP Mfg
Part Number: XD138
The XDP Fuel Filter Head Spacer Kit is a quick and inexpensive solution to a common problem for GM Duramax owners. The Fuel Filter Head spacer is designed to address the tight fit of your fuel filter wrench around the fuel filter. The kit allows for an additional 3/8" of clearance allowing you to ea...
$8.95
Brand: Destroked
Part Number: DS-FLYSPACER
Fits 12 valve, 24valve, Common Rail to ZF6 transmissionThe Destroked Flywheel Crank Spacer is needed when installing a 12 valve, 24valve, Common Rail to ZF6 transmission. This Flywheel Crank Spacer was designed to fit all ZF6 plates to ensure a smooth installation and a perfect fit!Features:
12v,...
$135.00
-10 %
Brand: Cummins
Part Number: 3679445
Cummins ISX Engine Mount SpacerImage For Reference OnlyPart #3679445...
$15.62 $17.35
Brand: AiRaid
Part Number: 400-591
PowerAid®; Throttle Body Spacer
Installs In 30-45 Minutes!
The PowerAid® was developed to enhance your vehicle’s off idle to mid range performance and efficiency. The unique “Helix Bore” design of the PowerAid creates a spinning action of the incoming air. As air passes through yo...
$149.99
Brand: AiRaid
Part Number: 450-638
PowerAid®; Throttle Body Spacer
Installs In 30-45 Minutes!
The PowerAid® was developed to enhance your vehicle’s off idle to mid range performance and efficiency. The unique “Helix Bore” design of the PowerAid creates a spinning action of the incoming air. As air passes through yo...
$169.99
Brand: AiRaid
Part Number: 200-617
Developed to enhance off-idle torque from 800 rpm to approximately 3,000 rpm, PowerAid®’s unique, patented Helix Bore design spins the incoming air charge as it passes through the throttle body spacer. This spinning action boosts the velocity of the incoming air and contributes to better atomizat...
$149.99
Brand: Merchant Automotive
Part Number: 10368
Discontinued (Updated 1/21/2025)
Please see our alternate product.
On 2011-2016 Duramax diesel engines, the fuel filter head location makes it very difficult to get to the fuel filter as the valve cover is in the way. This can make fuel filter servicing jobs take longer than expected, causing ...
$0.00
Brand: Ford Motorcraft
Part Number: F4TZ-6A369-A
Discontinued (Updated 12/16/2024)
Ford OE Engine Adapter Spacer
Ford part number: F4TZ-6A369-A
...
$0.00
-250x250w.jpg "94-03 Ford 7.3L Powerstroke Flywheel Reinforcement Plate")
Brand: Ford Motorcraft
Part Number: F4TZ-6A366-A
Discontinued (updated 8/21/2024)
Ford OE Flywheel Reinforcement Plate/Spacer
Ford part number: F4TZ-6A366-A
...
$0.00
Brand: Nitro Gear & Axle
Part Number: MRG925A
Discontinued (Updated 1/30/2025)
GM 9.25" To Chrysler AAM 9.25" adapter
Ring Gear Spacer Kit
Required on 03-06 Dodge Ram 2500/3500 to Run GM 9.25-XXXR Gears
Required on 07-Present Dodge Ram 2500/3500 with ARB or other Aftermarket Locker
Steel Construction
Works GM 9.25 Fr...
$0.00
Brand: Deviant Race Parts
Part Number: 49521
Fits: Frame side Polaris 2018-2021 XP/XPT Models, all locations Polaris 2018-2021 Turbo S, Polaris 2019-2021 Pro XP and Can-Am X3 2017+Replacement radius arm spacer for our radius arm kits. Great if you're building your own set of radius arms, or just refreshing your kit. This spacer is found on the...
$0.00
Brand: Ford Motorcraft
Part Number: F81Z-6A366-AA
Discontinued (updated 10/4/2024)
Ford OE Crank Spacer
Please enter VIN so we can verify fitment unless you KNOW this will fit your application.
Installs between flex plate and crank.
Ford part number: F81Z-6A366-AA
Picture for representation only.
...
$0.00
-250x250w.jpg "T3 Split 1/2\" Steel Turbo Spacer")
Brand: Source Automotive
Part Number: 0419B
DISCONTINUEDThis is a non-returnable partFully Machined -T3 divided spacer plate we use between turbo & exhaust manifold on
some of our kits. This plate is a slightly less than 1/2" steel. Approx
.470". Includes non tapped holes for mounting.
The two ports are taller than oem and may not s...
$0.00