-80x80.jpg)
Brand: Torque King Tools
Part Number: QK4621
QK4621 Inner Axle Seal Kit for Both Sides is our best selling Kit for 2000-2002 Ram Dana 60 CAD front axles. The including tools install QU40271 and QU40298 original equipment seals. These large diameter seals are not interchangeable with any other year or model of truc...
$294.99
Brand: Torque King Tools
Part Number: QK4803
QK4803 Inner Axle Seal Kit for Right Side Only for 2000-2002.5 Dodge Ram 2500 and 3500 Front Axles equipped the vacuum controlled Central Axle Disconnect (CAD) system. Installs QU40271 original equipment seals. These large diameter seals are not interchangeable with any other yea...
$207.49
Brand: Mahle
Part Number: GS33500A
Fits: 2001-2004 GM 6.6L Duramax LB7Use the Mahle Fuel Injector Seal Kit when installing injectors in your 2001-2004 GM 6.6L Duramax LB7. Mahle seals and gaskets are constructed from the highest quality materials and provide you with a factory-like fit and finish.Mahle: GS33500A...
$3.66
Brand: Mahle
Part Number: GS33757
Fits: 2001-2004 GM 6.6L Duramax LB7 MAHLE GS33757 Valve Cover Gasket & Injector Seal Kit is an OEM replacement gasket kit for your 2001-2004 GM 6.6L Duramax LB7. The Valve Cover Gasket & Injector Seal Kit provides your Duramax with a factory performance and replaces tired and damaged ga...
$90.81
Brand: Merchant Automotive
Part Number: 10468
The Merchant Automotive Deluxe Seal kit for the NP263XHD includes all the seals used throughout the transfer case to complete the proper reassembly after a transfer case rebuild or major overhaul.KIT INCLUDES: A23 Speed Sensor Seal (#10238 qty. 1)A13 Rear Output Seal (#22049 qty. 1)Tr...
$69.92
Brand: Merchant Automotive
Part Number: 10464
The Merchant Automotive Deluxe Bearing and Seal kit for the NP263XHD includes all the bearings and seals throughout the transfer case as well as low range shift fork pads and wear pads for the planetary gearset. If you are wanting to completely refresh your transfer case after any kind of no fluid s...
$220.18
Brand: Alliant Power
Part Number: AP0029
This kit is to rebuild your fuel filter base/ filter head on the 01-10 Duramax. Kit includes new seals and brass bleeder screw to reseal the factor filter base/head.Part number: AP0029 ...
$44.78
Brand: Dorman Products
Part Number: 904-124
This fuel filter primer housing seal kit is designed to match the original components and hardware required to repair the housing on specified vehicles. Made of quality components, this kit is engineered for reliable performance and durability.
Direct replacement - this fuel filter p...
$26.25
Brand: Mahle
Part Number: SS45974
Replace the worn valve stem seals inside your 2001-2010 GM 6.6L Duramax when you purchase the MAHLE SS45974 Valve Stem Seal Kit. Designed as a direct factory replacement, the MAHLE SS45974 Valve Stem Seal Kit is made to OE specifications and is constructed from OEM quality materials.F...
$21.01
Brand: Alliant Power
Part Number: AP0035
Fits: 2003-2007 Ford 6.0L PowerstrokeThis Kit includes the parts needed to install a new IPR Valve in your 2003-2007 Ford 6.0L PowerstrokeFeatures:IPR Valve Seal KitStock ReplacementAlliant: AP0035...
$41.59
Brand: Mahle
Part Number: GS33711
Fits: 2003-2007 Ford 6.0L Powerstroke
Mahle fuel Injector Seal Kit gives you the injector seals and gaskets needed for your 2003-2007 Ford 6.0L Powerstroke. Mahle gaskets are manufactured using top quality materials to provide you with factory-like sealing and service life.
Direct Rep...
$54.12
Brand: Mahle
Part Number: GS33442
Fits: 2003-2007 Ford 6.0L Powerstroke Mahle Fuel Injector Seal Kit is constructed to meet OE specifications and provides your 2003-2007 Ford 6.0L Powerstroke with a factory performance. The Fuel Injector Seal Kit provides a solid and tight seal that is made from materials that match stock.OE Qu...
$29.97
Brand: Mahle
Part Number: SS45952
Fits: 2003-2007 Ford 6.0L Powerstroke
An OE quality Kit, the MAHLE SS45952 Valve Stem Seal Kit replaces the valve stem seals inside your 2003-2007 Ford 6.0L Powerstroke. Crafted from OE quality materials, each Valve Stem Seal Kit is made to OE specifications. The Valve Stem Seal Kit maintai...
$33.33
Brand: Ford Motorcraft
Part Number: KC3Z-6079-AA
The Ford Motorcraft KC3Z-6079-AA (EHK-1) Long Block Gasket & Seal Kit includes all the gaskets, O-rings, and washers you needed to install a remanufactured engine into your 2003-2010 Ford 6.0L Powerstroke. This installation kit features all the same parts and components an authorized Ford dealer...
$353.47
Brand: Torque King Tools
Part Number: QK4685
QK4685 Front Inner Axle Seal Installer Kit for 2003-2013 Dodge Ram AAM 9-1/4" 14 Bolt Front Axles installs the Inner Axle Seals on 2003-2013 AAM 925 14 Bolt front beam axles used in all 2003-2013 Ram 2500, 2003-2012 Ram 3500 4x4 trucks. Also fits 2004-2010 Ram 1500 Mega Cab with the solid ...
$304.99
Brand: Torque King Tools
Part Number: QK4678
QK4678 2005-2016 Ford F-250, F-350 Super Duty® Knuckle and Hub Seal Kit with Installer includes the original equipment seals, o-rings, and gaskets that MUST be replaced anytime the axle shafts are removed from your Super Duty® front axle plus one of our heavy-duty TS1530 Knuckle Sea...
$253.73
Brand: Ford Motorcraft
Part Number: KC3Z-6079-DA
The Ford Motorcraft KC3Z-6079-DA (EVG-2) 20mm Head Gasket & Upper Seal Kit includes everything required to assemble the top end of your 2006-2010 Ford 6.0L Powerstroke engine. This reseal kit features the gaskets, dowels, and O-rings needed to install the heads, valve covers, exhaust and intake ...
$785.40
Brand: Merchant Automotive
Part Number: 10017
Reseal the base of the intake tube at the y-bridge in a 2006 to 2010 GM Duramax 6.6L V8 exhaust system with this high quality replacement o-ring seal.NOTE : Sold as a pair. 2 seals are required per engine. Includes Intake Tube Seal, LBZ/LMM, 2006-2010Part number: 10017...
$24.05
Brand: Dirty Hooker Diesel
Part Number: 500-315
Reseal your leaking lower radiator hose connector with this kit from DHD. Their Viton O-rings and retaining ring will allow you to service your existing hose, rather then purchase new! GM uses 2 different o-ring size in the connect, we provide both to ensure you have the one you need.Fitment:2006-20...
$21.00
Brand: Bostech
Part Number: ISK124
Injector Seal KitBrand: BT-PowerCondition: NewLimited 13 month / unlimited mileage warrantyEngine Fitment:GM Duramax LMMTechnical Information:Contains:1- Injector Seal Kit / 8- kits needed per vehiclePart number: ISK124 ...
$6.59
Brand: Mahle
Part Number: GS33614
Fits: 2007.5-2018 Dodge 6.7L Cummins Use the Mahle Fuel Injector Seal Kit to reseal the injectors in your 2007.5-2018 Dodge/Ram 5.9L/6.7L Cummins. Mahle original gaskets and seals provide you with a factory-like finish and fit. Constructed of only the highest quality materials, you can depend o...
$6.80
Brand: Bostech
Part Number: ISK103
Reseal vital engine components in your 2008-2010 Ford 6.4L Powerstroke with the Bostech Injector Seal Kit ISK103. Bostech Seals & Gaskets are made from high-quality materials that meet or exceed factory specifications. FEATURES:Sold Individually 1 Kit Required Per InjectorMeets Or Exce...
$8.95
Brand: Ford Motorcraft
Part Number: KC3Z-6E078-BA
The Ford Motorcraft KC3Z-6E078-BA (ESK-2) Lower Gasket & Seal Kit comes with everything required to seal up the bottom end of your 2008-2010 Ford 6.4L Powerstroke. This lower reseal kit features the gaskets, seals, and O-rings needed to reinstall the oil pump, crankshaft and oil pan onto the bot...
$198.00
Brand: Mahle
Part Number: GS33555
The MAHLE GS33555 Fuel Injector Seal Kit ensures your 2008-2010 Ford 6.4L Powerstroke is getting a OEM replacement seal kit. Made to meet factory specifications, the Fuel Injector Seal Kit maintains a stock performance.FEATURES:OE Quality Maintains a Factory PerformancePart number:&nb...
$16.89
Brand: Mahle
Part Number: GS33688
The MAHLE GS33688 Fuel Injector Seal Kit gives you the components you need to install injectors on your 2008-2010 Ford 6.4L Powerstroke. Each set will service 8 fuel injectors.FEATURES:OE ReplacementServices 8 Fuel Injectors Cross Reference #: 1873425C91, 1873425C93Part number: GS3368...
$314.92
Backordered
Brand: Ford Motorcraft
Part Number: KC3Z-6079-BA
Backordered with No ETA (Updated 6/16/25)
The Ford Motorcraft KC3Z-6079-BA (EHK-2) Long Block Gasket & Seal Kit comes with all the O-rings, gaskets and washers you needed to install a reman engine into your 2008-2010 Ford 6.4L Powerstroke.
This kit includes the same parts and componen...
$746.53
Backordered
Brand: Ford Motorcraft
Part Number: KC3Z-6079-EA
Backordered with No ETA (Updated 6/5/25)
The Ford Motorcraft KC3Z-6079-EA (EVG-3) Head Gasket & Upper Seal Kit includes the required parts to reassemble the top of your 2008-2010 Ford 6.4L Powerstroke short block. This upper reseal kit includes the dowels, gaskets and O-rings you need to inst...
$730.05
Brand: AC Delco
Part Number: 19256465
OEM Fuel Injector Seal Kit for LML Duramax, kit includes components to replace 4 injectors.
Part number: 19256465
...
$37.21
Brand: Sandcraft
Part Number: 18190100
Sandcraft Motorsports offers a full line of upgraded OE replacement Front Differential Bearings and Seals. This kit improves bearing tolerance, eliminates slop and reduces differential noise. Our kits are designed to handle extreme abuse and heat. After years of R&D we’ve been able to crea...
$165.00
Brand: Complete Performance
Part Number: VWK-2110-80
Precision Vent Glass Seal Kit
This 2 piece kit fits both driver and passenger doors of the vent assemblies. Precision's seal kit is made from the original specs and from high quality o-zone resistant materials to fit your vehicle.
Application:
1980 - 1986 Ford Bronco
...
$121.99
Brand: Torque King Tools
Part Number: QK4802
QK4802 2002 Ram 2500, Ram 3500 without CAD Inner Axle Oil Seal and Tool Kit to install both the left and right Inner Axle Shaft Seals for all mid to late 2002 model year Dodge Ram 2500 and Ram 3500 4x4 trucks without vacuum controlled Central Axle Disconnect (CAD). Our unique installer design w...
$238.74
Brand: Torque King Tools
Part Number: TK4038
TK4038 Inner Axle Seal and Tool Kit for 2013-up Ram 3500 and 2014-up Ram 2500 with AAM 925 12 Bolt Electric Central Axle Disconnect Front Axle. Installer and Thrust Plate Made in Montana.
Need More Info? Use the handy Links below to access over 40 years of Dan's product and vehicle spec...
$251.24
Brand: Torque King Tools
Part Number: QK4983
QK4983 Universal Dana 60 Oil Bath Inner Axle Seal and Tool Kit with Ford 2nd design universal fit Dana 60 oil bath type inner axle seals and adjustable depth installer tool set is specific to 2011-up Ford Super Duty, but these excellent seals will also fit 1999-2010 Ford Super Duty 4x4's. QK498...
$269.99
Brand: Torque King Tools
Part Number: QK4867
QK4867 Fixed Depth 1975-1997 Dana 60 Inner Axle Seal Kit Includes genuine original equipment Dana-Spicer axle shaft seals and the special tools you need to quickly and easily install the QU40059 Inner Axle Seals to a precise depth in all Chevy, Dodge, Ford, GMC, and International 4x4 ...
$237.49
Brand: Power Driven Diesel
Part Number: 61001010009
The rubber components of the AFC (the diaphragm, foot shaft o-ring, and housing seal) were previously hard to find and often become neglected on aging 12v trucks. The AFC Housing Reseal Kit includes everything, so you can be sure your AFC housing is free of oil and boost leaks.
Features:
Co...
$95.00
Brand: Keating Machine
Part Number: (6) M8 copper washers & (6) -158 o-rings
6 o-rings and 6 copper washers to reseal Keating Machine 12 valve billet valve covers.
Keating: (6) M8 copper washers & (6) -158 o-rings
...
$20.00
Part Number: 424014
Fits: 1994-2003 Ford 7.3L Powerstroke
This CNC Fab 424014 High Pressure Oil Pump (HPOP) Reseal Kit is the perfect component for your 1994-2003 Ford 7.3L Powerstroke. This kit will help reseal all 6 fittings on CNC Fabs 3 line HPOP Line Kits along with the rear build port and passenger side build ...
$32.95
Brand: Dorman Products
Part Number: 904-486
When a coolant thermostat housing eventually corrodes and leaks, the only original equipment solution is to replace the entire assembly. This Dorman OE FIX flange repair kit is an add-on support that repairs the housing at a lower cost.
Smart fix - this diesel thermostat housing and seal kit i...
$31.68
Brand: Dipaco
Part Number: DT730024
Injection pressure regulator valve seal kit for 94-03 Ford 7.3L Powerstroke by Dtech. This kit can be used to repair the IPR on 94-03 Ford 7.3L Powerstroke. Part number: DT730024...
$14.17
Brand: Ford Motorcraft
Part Number: 4C3Z-9C977-AA
Genuine Ford replacement for damaged IPR seals for 94-03 Ford 7.3L Powerstroke. Part number: 4C3Z-9C977-AA...
$55.88
Brand: Mahle
Part Number: GS33440
Fits: 1994-2003 Ford 7.3L Powerstroke
Use the Mahle fuel injector kit when installing injectors in your 1994-2003 Ford 7.3L Powerstroke. Mahle seals and gaskets are constructed from the highest quality materials and provide you with a factory-like fit and finish
Mahle: GS33440...
$9.17
Brand: Mahle
Part Number: SS45897
OE
Fitment and function valve stem seal kit by Mahle for 94-03 Ford 7.3L
Powerstroke.Detailed specificsOE Quality Maintains a Factory
PerformanceApplication Notes:Contains 8 Fluoroelastomer constructionPositive typeTop hat styleFor 0.3125" stem,
0.562"/0.572" nominal guide O.D.&nb...
$24.54
Brand: Torque King Tools
Part Number: QK4698
QK4698 Fixed Depth Front Inner Axle Seal Kit is a Complete Kit for both sides. Includes QT1190 Right Seal Installer, QT1136 Left Seal Installer, QT1048 125,000 psi tensile strength alloy steel Press Rod, USA made certified Grade 8 Hardware, and QT1047 Thr...
$256.24
Brand: Torque King Tools
Part Number: QK4699
QK4699 Kit for Right Side only. Includes QT1190 Right Seal Installer, QT1048 125,000 psi tensile strength alloy steel Press Rod, USA made certified Grade 8 Hardware, and QT1047 Thrust Plate, QU40105 Right Seal, QU40090 Central Axle Disconnect Ga...
$184.99
Brand: Mahle
Part Number: SS45903
Fits: 1998.5-2002 Dodge 5.9L Cummins Mahle supplies original Valve Stem Oil Seal for 5.9L Dodge Cummins engines. No other gasket manufacturer offers the Application Engineered approach to sealing an engine. A variety of different gasket materials insure an engine gets the optimal seal. Set of 1...
$22.00
Brand: Mahle
Part Number: SS46108
Fits: 2003-2007 Dodge 5.9L Cummins Made from OE quality materials, the Mahle Valve Stem Seal Kit is a direct factory replacement for the valve stem seals in your 2003-2007 Dodge 5.9L Cummins. The Valve Stem Seal Kit maintains a factory replacement and is constructed to meet stock specifications...
$35.95
Brand: Bostech
Part Number: ISK119
Injector Seal KitBrand: BT-PowerCondition: NewLimited 13 month / unlimited mileage warrantyEngine Fitment:GM Duramax LLYTechnical Information:Contains:1- Injector Seal Kit / 8- kits needed per vehiclePart number: ISK119...
$6.59
Brand: Mahle
Part Number: GS33505A
The Mahle Fuel Injector Seal kit is used to reseal the injectors in 04.5-07 Duramax engines.
Part number: GS33505A
...
$5.24