-80x80.jpg)
Brand: Kryptonite
Part Number: KRTRZ21
Part# KRTRZ21Fits; 2020-2021 Polaris RZR PRO XPCLICK HERE FOR INSTALLATION INSTRUCTIONSThis High Strength Stage 2 Tie Rod Kit is built with heavy duty 5/8" Chromoly Heim joints and is designed to last through years of off road abuse. Extremely high range on motion. Perfect for Long travel ...
$265.99
Brand: Sandcraft
Part Number: 10000113
This is a greaseable, direct replacement for the OE U-Joint on your OE Driveline. This is not compatible with SANDCRAFT Drivelines.RZR STOCK REPLACEMENT U-JOINT Sandcraft: 10000113...
$30.00
Brand: Sandcraft
Part Number: 10000006
Want to keep contamination out of your front differential? Our Drain and Fill Plug Kit will keep your front case, engine and rear case clean 24 hours a day with the use of 5 powerful stainless steel plugs with rare earth magnets that are 16 times stronger than factory drain plugs. Their hex head des...
$140.00
Brand: Aftermarket Assassins
Part Number: 116-1004
2-3 Day lead time as clutches are built to order
Fits 2014-15 RZR 1000 XP Models 2 & 4 Seat
The absolute ultimate kit for your 2014-15 RZR XP 1000! This clutch kit replaces your entire primary clutch, secondary clutch and all internals... completely new clutching with the AA h...
$1,495.00
Brand: Sandcraft
Part Number: C17180210
SANDCRAFT Limit straps protect your axles and suspension components by preventing the over extension of your suspension at full droop. These straps cushion the drop and protect the shocks, CVs, axles and steering components from damage caused by over extension. Made from the highest quality military...
$260.00
Brand: Aftermarket Assassins
Part Number: 102-1014
Fits 2020-21 RZR Pro XP Models 2 and 4 seat This kit includes our complete heavy duty AA primary clutch. This clutch is the same design found on the 2016-2020 RZR Turbo models with an encapsulated tower design. We found this clutch to hold power better, hold up bett...
$995.00
Brand: SSV Works
Part Number: RZ5-1KRC
2-3 week lead time requiredSSV Works custom molded sub enclosure is designed for a 10" subwoofer and easily installs under the passenger dash. NO CUTTING REQUIRED, the box simply bolts in and provides the proper airspace required for a 10" woofer. Includes a pre-installed pass through subwoofer wire...
$999.99
Brand: S&B Filters
Part Number: 76-2013
PARTICLE SEPARATOR FOR 2020-2022 POLARIS RZR PRO XPDon’t let the elements slow you down. A clogged filter chokes your engine of power. The S&B Particle Separator lets you play in harsh conditions, as it was designed to protect from water, snow, sand and fine dust. The Particle Separator ejects...
$499.99
Brand: SSV Works
Part Number: WP-RZ4GBS10
(fits RZR Turbo S and 2019 RZR XP models)Need more Bass in your space? SSV Works Amplified subwoofer system expands your WP series overheads with an easy plug and play solution. Also compatible with Polaris MTX overhead systems and soundbars.SSV Works custom molded sub enclosure is designed for a 10...
$649.99
Brand: SSV Works
Part Number: RZ4-GB10x
SSV
Works custom molded sub enclosure is designed for a 10" subwoofer and
easily installs and replaces glovebox. Just simply use the factory glove box
door! NO CUTTING REQUIRED, the box simply bolts in and provides the proper
airspace required for a 10" woofer. Includes a pre-installed pass thro...
$349.99
Brand: SSV Works
Part Number: RZ3-1KRC
2015-2018 Polaris RZR XP100 2/4 Seater Kicker Subwoofer System.Everything in one box. No soldering, no cutting, no crimping! Simply bolt in the pre-loaded subwoofer enclosure and pre-tuned amplifier with the included vehicle specific plug & play wiring harness. This system features the best of S...
$999.99
Brand: SSV Works
Part Number: WP3-RZ3O65
Discontinued (Updated 5/15/25)
Features:
This weatherproof, over-head audio system for the Polaris RZR XP1000 / 900 is the perfect solution for either 2 or 4-seater vehicles with a stock cage. This unit easily clamps above your head to your stock cage, leaving you with a 15-minute...
$0.00
Brand: SSV Works
Part Number: RZ4-1KRC
Polaris RZR XP Turbo S and XP Turbo Dynamix 2019+ 2/4 Seater Kicker Subwoofer System.Everything in one box. No soldering, no cutting, no crimping! Simply bolt in the pre-loaded subwoofer enclosure and pre-tuned amplifier with the included vehicle specific plug & play wiring harness. This system ...
$999.99
Brand: SSV Works
Part Number: RZ5-C65ARC
** Full Plug-&-Play Add-on Kit for Factory Polaris RZR Pro XP Ride Command Systems **For Polaris RZR Pro XP 2020 2 Seat OnlyExpand your factory Pro XP audio system for less! Utilizing the factory amplifier for power, all that’s needed to greatly increase your existing factory system’s output...
$449.99
Brand: SSV Works
Part Number: RZ5-DF65ARC
Add to the Polaris RZR Pro XP audio system with these door mounted Powersports 6.5-inch speaker pods.Utilizing new and superior technologies, including 3D modeling, SSV Works have fully optimized the space around the pod, allowing it to fit perfectly every time. The UV stable and all-weather durable...
$489.99
Brand: Aftermarket Assassins
Part Number: 103-1007
Fits ONLY 2020 RZR Pro XP Models 2 & 4 SeatDOES NOT fit 2021 Models as the helix design changed (coming December 2020)This should be on of your first modificationsOur S3 recoil clutch kits pack a huge punch! No matter the terrain, they hit hard and just keep pulling for days. On the ...
$450.00
Brand: Aftermarket Assassins
Part Number: 103-1012
Fits ONLY 2020 RZR Pro XP Models 2 & 4 Seat **DOES NOT fit 2021-Up Models as the helix design changed**
From trail rigs to high horsepower setups, this is the only clutch we will run on our shop vehicles
Works on stock vehicles all the way to our 330 crank HP big...
$1,125.00
Brand: Longhorn Fab Shop
Part Number: 201112
You either have bent crossmembers and know it or you have bent ones and don’t know it!!Upgrade your Polaris RZR Pro XP Crossmember with this heavy duty version! Excessive bending in the crossmember causes driveline angle and vibration issues as the carrier bearings mount to these crossmember...
$153.42
Brand: Longhorn Fab Shop
Part Number: 201113
You either have bent crossmembers and know it or you have bent ones and don’t know it!!Upgrade your Polaris RZR Pro XP Crossmember with this heavy duty version! Excessive bending in the crossmember causes driveline angle and vibration issues as the carrier bearings mount to these crossmember...
$153.42
Brand: Aftermarket Assassins
Part Number: 108-1034
Primary clutch fits 2020-Up RZR Pro XP/Turbo R models - For customers who already have our secondary spring and/or helix
From trail rigs to high horsepower setups, this is the only clutch we will run on our shop vehicles.
Works on stock vehicles all the way to our 330 crank HP big turbo ...
$975.00
Brand: Aftermarket Assassins
Part Number: 110-1009
Exhaust fits all 2020-Up RZR Pro XP/Turbo R Models 2 & 4 SeatThe AA RZR XP Turbo slip-on exhaust is just what your machine needs! We set out to produce an exhaust that looks great, sounds great, has adjustable sound levels, and has a price tag that won't have your significant other screami...
$575.00
Brand: Aftermarket Assassins
Part Number: 102-1012
Fits 2020-21 RZR Pro XP Models 2 and 4 seat Our S2 recoil clutch kits pack a huge punch! No matter the terrain, they hit hard and just keep pulling for days. On the trail or at the race you'll notice wicked acceleration and instant clutch response when getting back into the throttle...
$295.00
Brand: Aftermarket Assassins
Part Number: 103-1013
Fits 2021-Up RZR Pro XP Models 2 and 4 seat **DOES NOT FIT 2020 Models**
From trail rigs to high horsepower, this is the only clutch we will run on our shop vehicles
Works on stock vehicles all the way to our 330 crank HP big turbo setup
This kit includes our complete heavy ...
$1,125.00
Brand: Sandcraft
Part Number: 13230210
SANDCRAFT has solved the PRO-R/TURBO-R Lower Ball Joint issue. This product was designed to maximize performance and reliability to levels not seen anywhere else on the market. Every component has been re-engineered and machined in house. We use the best hardened steel components that will keep up w...
$310.00
Brand: Aftermarket Assassins
Part Number: 107-1065
Fits ONLY 2021-22 Pro XP/Turbo R & 2021 RZR Turbo & Turbo S Models**High Load Helix 1062 out of stock, red secondary spring with Performance 1065 helix can be used for same shift characteristics**DOES NOT FIT 2020 Pro XP ModelsHelix features a tighter roller & EBS pocket for less clutch ...
$165.00
Brand: Aftermarket Assassins
Part Number: 100-19-07
Tuners are in stock and ready to shipIf you are looking for the most bad-ass custom tunes that are easily loaded to your RZR from the DynoJet Power Vision, you've found them! AA's performance tunes are offered loaded directly on the Power Vision ECU tuner. This versatile tuner allows our...
$575.00
Brand: Aftermarket Assassins
Part Number: 108-1037
Fits 2020-2021 Pro XP, 2021 RZR Turbo + Turbo S, New Body Style Ranger 1000's2 washers stacked in the helix allow for less spring bind and smoother shiftingLess harmonic noise from the springIncreases spring rate by 10-15lbs peak on average, this can help eliminate slipping if more spring tension wa...
$20.00
Brand: Aftermarket Assassins
Part Number: 108-1005
This simple clutch compression tool makes changing your springs and helix a breeze! This tool will work excellent for your 2016+ RZR Turbo, Turbo S, RZR RS1, Pro XP, Can Am X3 and most likely othersIf you have a 2016+ RZR XP 1000, RZR 1000 S, General, or RZR 900, make sure you use the #2 tool ...
$30.00
Brand: Aftermarket Assassins
Part Number: 108-1026
Fits 2020-2021 RZR Pro XP, 2021 RZR Turbo, 2021 RZR Turbo SThe P90X clutch found on the above models is a great clutch that's easy to work on and maintain. However, many have found the clutch to have a feeble design causing it to break under certain circumstances. The towers fail which is cont...
$225.00
Brand: Aftermarket Assassins
Part Number: 114-1001
Fits 2016-21 RZR XP Turbo, Turbo S, RZR Pro XP Turbo, RS1 & new body style Ranger 1000 modelsThe Stryker military armored combat vehicle is built for battle, to withstand harsh punishment and to keep on rolling. Nothing is more fitting for these revolutionary belts.The latest in belt techn...
$160.00
Brand: SuperATV
Part Number: AA-P-RZR-HC-xxx
Get Room for Bigger Tires
You want bigger tires to tackle bigger obstacles, but you don’t want a lift that’s hard to handle and makes you feel unstable. You need SuperATV’s High-Clearance 1.5” Forward Offset A-Arms for your Polaris RZR 800. They increase your wheel base by 1...
$349.95
Brand: Longhorn Fab Shop
Part Number: RZR-201092
RZR Ultra Slider Seat Riser | 4.5in Additional Slide | 2in Rise | RZR-201092Features:Bolts to factory seat baseAdds an additional 4.5" of forward sliding on top of factory sliding (The first 4.5" is a fixed position and another 4.5" of sliding with lever from that position)Raises seat 2"Perfect for ...
$112.10
Brand: Aftermarket Assassins
Part Number: 108-1022
Fits 2020 Pro XP models2021 models use this thickness limiter from the factory (Polaris copied us.... flattering) A must have item for your P90X primary clutch!Fixes the over shift issue that causes the belt to hit the inner clutch cover and greatly decreases the chance of belt slip and many ot...
$20.00
Brand: SSV Works
Part Number: RZ5-DF65
Add to the Polaris RZR Pro XP audio system with these door mounted Powersports 6.5-inch speaker pods.Not designed for RIDE COMMAND equipped units. Click here for a compatible set. Utilizing new and superior technologies, including 3D modeling, SSV Works have fully optimized the space around the...
$439.99
Brand: SSV Works
Part Number: RZ5-UD1x
SSV Works custom molded sub enclosure is designed for a 10" subwoofer and easily installs under the passenger dash. NO CUTTING REQUIRED, the box simply bolts in and provides the proper airspace required for a 10" woofer. Includes a pre-installed pass through subwoofer wire.They are 100% fiberglass f...
$349.99
-10 %
Brand: SSV Works
Part Number: RZ4-GB10U
SSV Works custom molded sub enclosure is designed for a 10" subwoofer and easily installs and replaces glovebox. Just simply use the factory glove box door! NO CUTTING REQUIRED, the box simply bolts in and provides the proper airspace required for a 10" woofer. Includes a pre-installed pas...
$315.00 $349.99
Brand: SSV Works
Part Number: WP-RZ3BS10
Plugs directly into the WP Series RZR XP 1000/XP4 1000 System: WP-RZ3O4
(designed for XP 1000 and XP4 1000 - does not fit RZR 900, and S 1000)
SSV Works custom molded sub enclosure is designed for a 10" subwoofer and bolts into the open space behind the seat, clear of the cab. Weath...
$649.99
Brand: Longhorn Fab Shop
Part Number: RZR-201027
*Pair*Bolt in 1000 seats into your 900 or 800 with no drilling or welding. Adapts the 1000 seat bolt pattern to fit the 900 and 800 base. Also adds extra support to the base and seat bottom. Fits 800s, 900s, 900xp1/8" SteelPowder Coated blackIncludes hardwareLonghorn Fab Shop Part N...
$74.63
Brand: Longhorn Fab Shop
Part Number: RZR-201028
*Pair* Features:Perfect for chopped or lowered cageMore comfortable riding positionLowers seat back 2"Latch and unlatch the seat quickly from the front (Perfect for aftermarket seats)Reclines 6 deg over stock (28 deg total recline). DOES NOT raise front of seat in order to incr...
$170.53
Brand: Aftermarket Assassins
Part Number: 103-1002
Our S3 recoil clutch kits pack a huge punch! No matter the terrain, they hit hard and just keep pulling for days. On the trail or at the race you'll notice wicked acceleration and instant clutch response when getting back into the throttle after hammering that corner. In the dunes ...
$425.00
Brand: Factory UTV
Part Number: ProXPSkd-12
Factory UTV RZR Pro XP 1/2 UHMW Skid Plate for TWO SEAT MODELSFactory UTV items may take up to 2 weeks to ship, and are limited to the lower 48 states. To ship this item elsewhere, please call us for an accurate quote. Factory UTV RZR Pro XP 1/2 Inch UHMW Skid Skid Plate. Factory UTV, the first...
$786.39
Brand: Factory UTV
Part Number: ProXP4Skd-38
Factory UTV RZR Pro XP Three Eighths UHMW Skid Plate for FOUR SEAT MODELSFactory UTV items may take up to 2 weeks to ship, and are limited to the lower 48 states. To ship this item elsewhere, please call us for an accurate quote. Factory UTV RZR Pro XP Three Eighths UHMW Skid Skid Plate. Factor...
$929.26
Brand: Factory UTV
Part Number: ProXP4Skd-12
Factory UTV RZR Pro XP 1/2 UHMW Skid Plate for FOUR SEAT MODELSFactory UTV items may take up to 2 weeks to ship, and are limited to the lower 48 states. To ship this item elsewhere, please call us for an accurate quote. Factory UTV RZR Pro XP 1/2 Inch UHMW Skid Skid Plate. Factory UTV, the firs...
$1,059.65
Brand: Shock Therapy
Part Number: STXP1KDRSKIT
Polaris XP Turbo & XP4 Turbo (DRS) Dual Rate Spring Kit
Get rid of the collapsed upper spring and ride in comfort with you the Shock Therapy Dual Rate Spring Kit! Reap the benefits a Shock Therapy dual rate spring kit can bring to your machine, it will reduce washboard chatter...
$849.40
Brand: Factory UTV
Part Number: RS1DInserts
Factory UTV items may take up to 2 weeks to ship, and are limited to the lower 48 states. To ship this item elsewhere, please call us for an accurate quote. Polaris RZR RS1 Door Insert Kit. Door Inserts for the Polaris RZR RS1 constructed from a powder-coated mild steel tube frame and plastic s...
$325.49
Brand: Aftermarket Parts
Part Number: SXFB-1450-1
New For the Polaris RZR XP Pro the Fab Fours SXS bumper was designed to add style and utility on the most popular sport utv in the world. Key features include ultra narrow design (to provide maximum tire clearance), Winch Ready (recommended Warn AXON 45 ), Integrated shackle mounts, Pre-drilled hole...
$449.99
Brand: Bikeman Performance
Part Number: 10-307
MO FLOW WATER PUMP IMPELLERIf you are having issues keeping your Polaris UTV cool, this is for you! Our pump achieves up to 20% more flow while being far less susceptible to cavitation. The added flow keeps a much more constant head temp with reduced hot spots. Cavitation will kill a UTV engine quic...
$159.99
-250x250.jpg "RZR XP Turbo/RS1 BMP Billet Aluminum Primary Clutch Cover")
Brand: Bikeman Performance
Part Number: 20-CYCLONE-1
Compared to the inline clutch blowers and off brand imitation covers, our CYCLONE never hinders airflow and actually works. Don't be fooled by imitation fan plates that do not make a difference. Inline blowers generate more CFM than stock at idle, but once the CFM of the clutch housing goes above th...
$229.95