filter

ARP stainless steel valve cover bolt kit for LB7 Duramax. Features170,000 PSI of Tensile StrengthStainless SteelSpecsSocket Size: 8mm 12ptThread Size: 1/4-20ARP: 400-7531...

Restore lost power from the valvetrain in your 2001-2016 GM 6.6L Duramax with the XDP Pushrods 7/16" Competition & Race Performance XD316. The factory pushrods in your Duramax engine are not adequate to handle the stress from your modified engine. Increased cylinder pressures, higher engine...

03-04 Dodge 24 Valve Common Rail Diesel Bosch Stock Injector Quantity 1 (one) Bosch Dodge Ram Cummins Common Rail injector.1 Year Warranty. This is a 2003-2004 Dodge 5.9L Cummins Diesel Bosch Fuel Injector, that has been remanufactured by the same company who built it new, Bosch. It is as close to...

Full Manual Valve Body for 03-07 5.9 Cummins with 48REThe same Valve Body used in 'Red Delicious', our 2700+ HP 06 CumminsBuilt, flow tested, & calibrated in house.*DOES NOT INCLUDE ROOSTER COMB*PLEASE READ CRUCIAL INFORMATION BELOWCRUCIAL INFORMATION:THIS IS A PRODUCT INTENDED FOR BUILT TRANSMI...

04.5-07 Dodge 24 Valve Common Rail Diesel Stock Injector Quantity 1 (one) Bosch Reman Dodge Ram 5.9L Cummins Common Rail injector. No junk reman BS, genuine Bosch reman!1 Year Warranty.This is a 2004.5-2007 5.9L Commonrail Cummins Diesel Bosch Fuel Injector, that has been remanufactured by the same...

ARP black oxide valve cover bolt kit for 04.5-16 Duramax. Features170,000 PSI of Tensile StrengthBlack Oxide CoatingSpecsSocket Size: 8mm 12ptThread Size: 1/4-20ARP: 100-7533...

ARP black oxide valve cover bolt kit for 04.5-16 Duramax. Features170,000 PSI of Tensile StrengthBlack Oxide CoatingSpecsSocket Size: 8mm hexThread Size: 1/4-20ARP: 100-7534...

Alliant Power high pressure fuel pump/ exhaust gas recirculation (HPFP/EGR) valve installation kit for 07-10 GM LMM 6.6L Duramax.Part number: AP0130...

The EZ Oil Drain Valve replaces the standard oil drain plug, making oil changes easier, saving valuable time and expenses.Part number: EZ-101...

Titanium Signature Series Diesel Fuel Pump 100GPH Dodge Cummins 5.9L 1989-1993 (TS D02 95G) FASS Whisper Technology (FWT) was engineered to meet the stringent demands of  today’s quiet diesel engines. FASS Whisper Technology was in development and testing for over two and a half yea...

Custom Individual Runner Intake Manifold for the 89-98 Cummins 5.9L Features: Equal Air Distribution 3.5 Inch V-Band Inlet. V-band clamp is included.  Outflows Competitors Competitively-Priced Stainless Steel Construction We're not joking around anymore, not even "just kidding" ;) A...

OEM Bosch Delivery Valve Holder Copper WasherFits 91.5-93 Cummins VE Injection Pumps. May fit other applications. Bosch: 1460105305 Price is for ONE washer. 6 Required. ...

OEM Bosch Delivery Valve HolderFits 91.5-93 Cummins VE Injection Pumps. May fit other applications. Bosch: F002D12873 Price is for ONE holder. 6 Required. ...

Full Manual Valve Body for 94-02 Cummins with 47REThe same Valve Body used in 'Red Delicious', our 2700+ HP CumminsBuilt, flow tested, & calibrated in house.*DOES NOT INCLUDE ROOSTER COMB*CRUCIAL INFORMATION:THIS IS A PRODUCT INTENDED FOR BUILT TRANSMISSIONS AND RACING APPLICATIONS ONLY! TR...

Cummins part numbers: Thermostat: 3928499 Seal: 3925466 Seal: 3927305  ...

Elevate your Dodge Cummins Diesel truck's performance with AVP's Billet Delivery Valve Holders designed for the P7100 fuel pump. Engineered for precision, these holders are your key to unlocking the full potential of your '94 - '98 Dodge Cummins engine.Product Highlights:• Fuel Flow Optimization: ...

Timing tool kit for a Dodge Cummins with the inline P7100 fuel pump, otherwise known as "p-pump". These pumps came stock on 1994 to 1998 Dodge trucks. This timing tool kit allows you to set your injection pump timing in relation to crankshaft TDC very precisely. The factory method of se...

Backordered with No ETA  **Updated on 07/12/2024** Direct replacement right side valve cover for 96-03 Ford 7.3L Powerstroke by Dorman. Part number: 264-5116 ...

Custom Individual Runner Intake Manifold for the 98.5-02 Cummins 24V Features: Equal Air Distribution 3 Inch V-Band Inlet. V-band clamp is included.  Outflows Competitors Competitively-Priced Stainless Steel Construction Actual Sized Runners We're not joking around anymore, not even "just...

Bean Machine valve covers are designed to stand out, not only from the stock vc, but also from any other valve cover on the market.  These valve covers have a one of a kind custom look. Logos can be our logo, or whatever custom logo you wish to have machined! (Custom logos are additional cost.)...

FAST GUIDE TO  SMARTY'S SPECIAL FEATURESCaTCHER & Revo software's insideTen different  performance levelsAdjust Speed Limiter, Torque Management & Injection TimingFastest download in the industry, a typical ECM update takes less than two minutesABS tire height updates in just ...

This fuel water separator drain valve is designed to match the fit and function of the original valve on specified vehicles, and is engineered for durability and reliable performance.Direct replacement - this fuel water separator drain valve is designed to match the fit and function of the original ...

Price is per valve. Mahle valves are only sold as a set of 2. Multiples of 2 must be ordered.Swap the exhaust valves in your 2000-2006 Dodge 5.9L Cummins with the Clevite 211-4183 Exhaust Valve. An OEM replacement, the Exhaust Valve is constructed to OE specifications.FEATURES:Exhaust ValveOEM Quali...

Keep your 2001-2002 Dodge 5.9L Diesel 245HP (6-Speed Manual Transmission) running properly when you purchase the XDP OER Series New Fuel Injector XD591. These OE-style replacement injectors are built to the OEM specifications and are a direct-fit replacement for the factory part. Features: ...

The DTech DT660027 Valve Cover Gasket & Injector Installation Kit is the gasket kit you want to have when installing injectors in your 2001-2004 GM 6.6L Duramax LB7. This kit is meant to service one cylinder bank. It include (1) lower rocker arm cover gasket, (12) cover bolt noise isolator ...

The DTech DT660015 Valve Cover Injection Line Seal replaces the old Injection Line Seal in the valve cover of your 2001-2004 GM 6.6L Duramax. These seals feature an OE style that meets or exceeds OE specifications.FEATURES: OE Style Replacement1 Kit Required Per Cylinder Bank 2 Kits R...

Fits: 2001-2004 GM 6.6L Duramax LB7 MAHLE GS33757 Valve Cover Gasket & Injector Seal Kit is an OEM replacement gasket kit for your 2001-2004 GM 6.6L Duramax LB7. The Valve Cover Gasket & Injector Seal Kit provides your Duramax with a factory performance and replaces tired and damaged ga...

Fits: 2001-2004 GM 6.6L Duramax Regardless of what application you're trying to seal, you can count on Mahle doing the research and testing to provide the optimum material and technology for that specific task. No other gasket distributor offers their application-engineered approach to sealing ...

ARP black oxide valve cover bolt kit for LB7 Duramax. Features170,000 PSI of Tensile StrengthBlack Oxide CoatingSpecsSocket Size: 8mm 12ptThread Size: 1/4-20ARP: 100-7531...

Use our improved lower valve cover bolt kit with a hex bolt instead of the allen head bolt that is sometimes hard to get a socket or wrench on. By using our bolts, you will better be able to service your engine.Set of 12 bolts. Services one sideIncludes:LOWER VALVE COVER BOLT LB7-Each #M6C30BF10P/DP...

Replace your damaged or stripped out bolts with new replacements. Sold in packs of 11. Services one side.Includes:Upper Valve Cover Bolt, LB7, 2001-2003, Each #91290A323Part number: 10196...

Improve your LB7 or LLY's reliability by utilizing our in-house designed and tested kit coupled with our established transmission tuning. We calibrate firmness and timing of shifts, so you’ll be guaranteed to feel the smoothness and better shift quality missing on the 5 speed Allison. If you’re ...

DHD Built Performance Allison Transmission Valve BodyDHD's Turbo Tony valve body is assembled in house with the best parts in the industry. DHD's 17 years of experience building transmissions has really allowed them to hone in on exactly what products and services make the best performing Allison tr...

Replace your damaged or inoperative Duramax PCV valve with this all in one service kit from DHD. As your truck ages these diaphragms swell and distort from exposure to temperature cycles and engine oil. This distortion can decrease the valves efficiency and lead to oil leaks. DHD's service kit inclu...

Replace the worn valve stem seals inside your 2001-2010 GM 6.6L Duramax when you purchase the MAHLE SS45974 Valve Stem Seal Kit. Designed as a direct factory replacement, the MAHLE SS45974 Valve Stem Seal Kit is made to OE specifications and is constructed from OEM quality materials.F...

Upgrade the valvetrain in your 2001-2016 GM 6.6L Duramax engine with the Wagler WCPC6643 Dual Valve Spring Kit With Steel Retainers. Designed to work with your factory spring shim, the dual valve spring kit increases seat pressure to 145lbs at 1.650 installed height.     &nbs...

6.6L Duramax 130lb. Valve Spring Kit  Fits: 2001-2016 6.6 Duramax Features: Helps Prevent Valve Float Rated up to 130psi Boost/Drive Pressure Rated up to 5000rpm 32 Conical Valve Springs 32 Billet Steel Retainers 32 Chromoly Spring Seats 64 Valve Locks Fits 2001-2016 LB7...

FIts: 2001-2016 GM 6.6L Duramax LB7/LLY/LBZ/LMM/LMLThis PPE Valve & Valve Spring Kit replaces the stock intake and exhaust valves on your 2001-2016 GM 6.6L Duramax. The intake/exhaust valve, valve seal, spring, spring seat/retainer/keeper kit comes with a PPE Duramax Cast  Iron Cylinde...

Fits: 2001-2016 GM 6.6L Duramax LB7/LLY/LBZ/LMM/LMLSwitch out the factory valve springs on your 2001-2016 GM 6.6L Duramax with this PPE Valve Spring Kit. This valve spring, spring seat/retainer/keeper kit comes installed with each PPE Duramax Cast Iron Cylinder head. The tapered valve springs' ...

Manton pressure tower valve spring kit for 01-16 Duramax. Kid includes:32 springs32 retainers32 spring cups64 locksPart number: D-105-KIT-Dmax...

Dual Fueler Race Valve (M20-1.5 to M14-1.5) included in the PPE Dual Fueler Kits for GM 6.6L Duramax diesel engines and is available sold separately.Part number: 113061017...

The XDP Pushrods 3/8" Street Performance XD315 eliminate the weak link in the valvetrain of your 2001-2016 GM 6.6L Duramax. The factory pushrods in your Duramax engine can hardly handle stock output levels. The increased cylinder pressure, high engine RPM, and increased valve spring pressures o...

The XDP Billet Rocker Arm Valve Bridge Set XD384 will greatly improve the factory valvetrain in your modified 2001-2016 GM 6.6L Duramax. The OE rocker arm bridges in your valvetrain were designed for stock output levels. Once modified, your Duramax engine can quickly produce more stress and load tha...

The XDP Performance Valve Springs & Retainer Kit XD386 are a perfect upgrade for your modified 2001-2016 GM 6.6L Duramax. Camshaft upgrades and other modifications that increase boost require more valve control. The XDP Performance Valve Spring feature a conical design for better valve control t...

Direct fit OE quality replacement C,D,E,G shift valve solenoid for 01-19 GM 6.6L Duramax.  Allison: 29536833 ...

Fits: 2003-2004 Ford 6.0 PowerstrokeReplace your malfunctioning EGR valve with the Allian AP63438. This is a direct-fit built to meet or exceed factory specifications and will restore proper function. Alliant Power: AP63438...

We designed our Billet Valve Cover 03-05 in house for the best balance of fit, finish, and functionality, while keeping your budget in mind.   These valve covers are made from aircraft quality 6061-T6 aluminum and come with all stainless steel fasteners.   A baffle system was inc...

Convert your 2003-2005 Ram with 4-pin injector connectors to the 2006-2018 6-pin injector connectors with our plug-and-play conversion harness.  This conversion harness is for use on a 2003-2005 Cummins where a 2006 and newer rocker box style is used. Produced in-house, our manufacturing proces...