-80x80.jpg)
Brand: Longhorn Fab Shop
Part Number: 201112
You either have bent crossmembers and know it or you have bent ones and don’t know it!!Upgrade your Polaris RZR Pro XP Crossmember with this heavy duty version! Excessive bending in the crossmember causes driveline angle and vibration issues as the carrier bearings mount to these crossmember...
$153.42
Brand: Longhorn Fab Shop
Part Number: 201113
You either have bent crossmembers and know it or you have bent ones and don’t know it!!Upgrade your Polaris RZR Pro XP Crossmember with this heavy duty version! Excessive bending in the crossmember causes driveline angle and vibration issues as the carrier bearings mount to these crossmember...
$153.42
Brand: DieselSite
Part Number: XOVER65xW
DIESELSITE STAINLESS STEEL BELLOWED CROSSOVER PIPE
*Note* These will not work with manual transmissions right now, but we are working on the set(s). Please check back soon!
Finally, a cross-over pipe with bellows! You may not know, but the OE pipes have no ability to flex during t...
$249.00
Brand: DFUSER
Part Number: DFR-1001110
Parts List:Straight -06 to O-Ring HPOP fittings (Qty-2)Straight -05 to O-Ring head fittings (Qty-2)High rated hose with double offset 90 degree mandrel bent fittings for passenger side (Qty-1)High rated hose with 90 degree mandrel bent to straight fittings for driver&nb...
$249.99
Brand: Apex Diesel
Part Number: ADS44BCG
Apex Diesel S400 4″ Billet Turbine Wheel Cross Guard
NTPA and PPL approved.
Part Number: ADS44BCG
...
$199.00
Brand: Apex Diesel
Part Number: ADS45BCG
5″ Vband weld flange adapter that fits 5″ s400 turbos.NTPA and PPL approved. Part Number: ADS45BCG...
$245.00
Brand: Cummins
Part Number: 3924755
94-98 Dodge Ram 5.9L Cummins Thermostat Housing to Head Crossover Hose
Includes #5 in picture only.
...
$35.59
Brand: Pusher
Part Number: PDC9802CAK
This is the most cost effective way to protect your rear cylinders on trucks under the 500HP mark. It addresses the restrictive factory intake manifold and the air starvation of the rear cylinders.The Cross-Air adapts to an existing port at the rear of the intake plenum that is normally sealed off w...
$449.99
Brand: Pusher
Part Number: PDC9802CA
The Pusher 3" Cross-Air works with the factory intake manifold or any factory replacement manifold and is the most cost effective way to protect your rear cylinders on trucks under the 500HP mark. The Cross-Air adapts to an existing port at the rear of the intake plenum that is normally sealed off w...
$299.99
Brand: Pusher
Part Number: PDC0307CAK
This is the most cost effective way to protect your rear cylinders on trucks under the 500HP mark. It addresses the restrictive factory intake manifold and the air starvation of the front and rear cylinders.The Cross-Air adapts to existing ports at the front and rear of the intake plenum that are no...
$499.00
Brand: The Hungry Diesel
Part Number: NI3COP
Turbo Configuration HX35/HX40/S300 V-band Backordered for 2+ months (Updated 7/2/25)
THD Non Intercooled Cross Over. Help your engine breathe, and cool down your egts. Feedback has shown a 100 degree drop in peak egt temps as well as 3-4 psi gains.
This product is NOT intended to m...
$229.99
Brand: Pusher
Part Number: PDC0307CA
Pusher 3" Cross-Air for Cummins 5.9L turbo diesel engines in 2003-2007 Dodge Ram trucks.The Pusher 3" Cross-Air works with the factory intake manifold or any factory replacement manifold and is the most cost effective way to protect your front and rear cylinders on trucks under the 500HP mark. The C...
$349.99
Brand: Cummins
Part Number: 3926761/3923204
94-98 Dodge Ram 5.9L Cummins Thermostat Housing to Head Crossover Hose Fittings
Includes:
1x 3926761 (#8) Relief Valve Fitting (screws in head)1x 3923204 (#4) Brass Fitting (screws in thermostat housing)
ONLY...
$112.51
Brand: Bosch
Part Number: F00RJ00437
Also called a connector tube or crossover tube nut. This is for a single (1) nut, 6 are needed.Genuine OE Bosch
Bosch Part number: F00RJ00437Replaces:Cummins: 3946625, 4893739, 5264181Mopar: 5086866AB...
$6.10
Brand: DFUSER
Part Number: DFR-10020xx
This hose is used to bridge the 2 high pressure oil rails in the heads that feed the injectors.
The installation of this hose will typically smooth out rough idles as the ICP can now sense the pressure in both heads, quiet the engine, as well as provide improved oil flow to the injectors.
Easy t...
$79.99
Brand: Bosch
Part Number: F00RC00647
2007.5-2022 Dodge Ram 6.7L Cummins Diesel Bosch Injector Connector Tube
Also known as high pressure crossover tube.
We recommend replacing these if you are installing new injectors.
Includes:
1 connector injector tube with o-ring
6 needed per engine.
Bosch: F00RC00647
Replaces:
C...
$49.44
Brand: Diamond Eye
Part Number: 321099
FOR 1993., 1994, 1995, 1996, 1997, 1998, 1999 & 2000- Chevy 6.5l diesel 2500/3500 - 2.5" aluminized - performance diesel exhaust - cross-over pipe - 2 piece design leave options for applications where the heads have been decked.
Diamond Eye part number: 321...
$162.62
Brand: Cummins
Part Number: 5264181
This is for a single (1) nut, 6 are needed.
Part number: 5264181Replaces:Cummins: 3946625, 4893739Mopar: 5086866AB...
$14.91
Brand: Cummins
Part Number: 2872288
03-07 Dodge 5.9L Cummins Injector Connector Tube With O-Ring
Cummins Part number: 2872288 (Old part number 4929864/2872395)
...
$74.74
Brand: DFUSER
Part Number: DFR-1001061
The best fuel system that we can design is our Stage II fuel system. That system is designed for none regulated fuel pumps. Many aftermarket fuel pumps are regulated. As such, the Stage II kit not needed.
We have created a Crossover Line kit to help equalize the fuel pressure between the two cylind...
$119.99
Brand: Cummins
Part Number: 12x 3943626
98.5-2018 Dodge 5.9L & 6.7L Cummins Rocker Valve Bridges complete set of 12.
May also be called rocker arm bridge.
#1 in the picture.
Cummins: 3943626
...
$495.21
Brand: DieselSite
Part Number: HXxx
NOTE: YOU DO NOT NEED THIS CROSSOVER HOSE IF YOU HAVE AN ADRENALINE HPOP. That is taken care of in the pump.
The High Pressure Oil Crossover Line connects the left and right High Pressure Oil rails together. This allows the computer(PCM) to monitor the pressure o...
$79.00
Brand: Cummins
Part Number: 3943626
98.5 and up Dodge 5.9L & 6.7L Cummins Rocker Valve Bridge. May also be called a rocker arm bridge.
#1 in the picture.
Cummins: 3943626
...
$41.27
Brand: International
Part Number: smc8122
#3 in picture only. Specialty Mfg. cross arm magnet kit for integrated cross arm on IC buses. Works on IC buses with thru bumper cross arm.Part #smc8122 ...
$130.83
Brand: Aftermarket Parts
Part Number: Cumminscrossovergskt
Single gasket.
Steel Core or Rubber coated copper available, select option above....
$19.43
Brand: International
Part Number: SMCXE278198SP
#1 in picture only.Part #SMCXE278198SPPart #SMC78190...
$704.04
Brand: DFUSER
Part Number: DFR-1001091
The best fuel system that we can design is our Stage II fuel system. That system is designed for none regulated fuel pumps. Many aftermarket fuel pumps are regulated. As such, the Stage II kit not needed.
We have created a Crossover Line kit to help equalize the fuel pressure between the two cylind...
$229.99
Brand: DFUSER
Part Number: DFR-1002057
ICP/High Pressure Crossover O-Rings
Did you install HX (High Pressure Crossover) line? Is it leaking?
Did you remove your ICP or does it leak?
Made for exact fit.
Made of Veton (A tough material that resists leaking and tearing).
Built for exact fit.
Part Number: DFR-1002057
Sup...
$14.99
Brand: Titan Fuel Tanks
Part Number: 7010201
52 Gallon*, extra heavy duty cross-linked polyethylene fuel tank. Tank comes complete with powder-coated cross-member support bracket and steel strap set, extruded rubber mounting bushings, vent hoses, 2 ea. rollover safety vent valves, seals and required clamps.For Crew Cab equipped vehicles with 6...
$1,642.55
Brand: Pusher
Part Number: PDC0307MCA
Discontinued (Updated 1/16/2024)
The Pusher 3.5" Mega Intake System with Cross-Air replaces all of your 3” factory post intercooler plumbing and intake manifold with 3.5” mandrel bent tubing, heavy duty 4-ply silicone couplers and stainless T-bolt clamps. This system provides t...
$0.00
Brand: Pusher
Part Number: PDC9802MCA
Discontinued (Updated 1/16/2024)
The ultimate bolt on combination to address the air delivery short comings to the Cummins 24v cylinder head in 1998.5-2002 Dodge Ram trucks.
The Pusher 3.5" Mega Intake System with Cross-Air replaces all of your 3” factory post intercooler plumbing a...
$0.00
Showing 1 to 33 of 33 (1 Pages)