filter

2003-2007 6.0L Powerstroke Diesel Ford F350/450/550 Cab & Chassis, Turbo Back, Single Side, Off Road, 4 Inch - 3.5 Inch Downpipe KEY FEATURES: # Delivers a rich, mellow exhaust note # Installs with common hand tools # Can improve fuel economy by 1-2 mpg # Boosts torque and horsepower #...

11-12 6.7L Cummins Cab & Chassis Northeast Diesel Stock Replacement Injector Every injector goes through 7 tests to insure perfect calibration. All injectors are tested on state of the art equipment with the most current calibrationCore Charge Applies. A UPS Pre-Paid return label is in...

13-18 6.7L Cummins Cab & Chassis Northeast Diesel Stock Replacement Injector Every injector goes through 7 tests to insure perfect calibration. All injectors are tested on state of the art equipment with the most current calibrationIncludes:New copper nozzle washerNew body o-ringGenuin...

Why Fleece Cheetah Turbo? The factory turbos on the 2017-2019 Cab Chassis Powerstrokes are junk, some fail with less than 30,000 miles on them. That's where the Fleece Cheetah Turbo steps in. This beast is engineered to not only meet but exceed the demands of your truck’s engine. Here&rsq...

WILL NOT WORK ON MANUAL TRANSMISSION TRUCKS.  Features: *Increased Fuel Economy *Lower EGTs *Mandrel Bent Tubing for Maximum Flow *Direct Fit *Increased Horsepower and Torque *Agressive Sound *Better Throttle Response *Easy Bolt-On Kits *Utilizes OEM Hangers *1-Year Limited Warra...

Fits: 2001-2010 GM Silverado/Sierra 2500HD/3500HD 2WD/4WDPut the Apex Chassis Pitman Arm (3-Groove) onto your 2001-2010 GM Silverado/Sierra 2500HD/3500HD 2WD/4WD. The SAE 1045 Solid Steel Forged Housing is the best choice of carbon alloy steel for this application because of its durability and ...

Fits: 03-07 Ford F-350/450/550 6.0L Powerstroke (With Catalytic Converter) (Cab & Chassis)AP Emissions: 54202...

Fits: 2003-2013 Dodge 2500, 2003-2010 Dodge 3500 (See Applicaitons)Switch out the old ball joints with this Apex Chassis Extreme Duty Upper and Lower Ball Joint Kit for your truck. The ball studs are built from SAE 4140 Hot Forged Chromoly. These polished ball studs have anti-friction bearings with ...

Fits: 2003-2013 Dodge 2500/3500 4WD CumminsStrengthen the steering in your 2003-2013 Dodge 2500/3500 4WD with this Apex Chassis Extreme Duty Tie Rod & Drag Link. This is a direct replacement and is an extreme duty Tie Rod and Drag Link assembly that replaces your failed OE steering. Oversiz...

Fits: 2003-2013 Dodge 2500/3500 CumminsTry putting this Apex Chassis Extreme Duty Upper and Lower Ball Joint Kit onto your 2003-2013 Dodge 2500/3500. These ball studs are built from SAE 4140 Hot Forged Chromoly. These are polished ball studs and have anti-friction  bearings with precise to...

Fits: 2005-2019 Ford F-250/350 4WDGive this Apex Chassis Track Bar Ball Joint a try in your 2005-2019 F-250/350 4WD. This axle-side ball joint is built to solve the issue of early wear commonly experienced with the factory part, that delivers superior longevity and performance.  Manufactured fr...

Replace the failed injectors in your 2010-2012 Ram 6.7L Cummins with the XDP Remanufactured 6.7 Fuel Injector XD497. With more than 30 million injectors on the road, you can be sure that you are getting a quality replacement component.XDP fuel injectors are remanufactured with only the highest quali...

The BD-Power 1043007 Exhaust Manifolds are an improved replacement to the weak factory exhaust manifolds on your 2011-2014 Ford 6.7L Powerstroke. Constructed from heavy duty 0.275" Thick-walled Hi-Silicon ductile casting, these manifolds are 75% thicker than stock, helping to reduce the chance of cr...

Fits: 2011-2016 Ford F-250/350 4WD (Except Wide Track)This Apex Chassis Extreme Duty Tie Rod & Drag Link is for your 2011-2016 Ford F-250/350 4WD today. It comes with an oversized tie rod and drag link ends, connected by massive DOM Tubes, which eliminate death wobble and tightens up steering un...

Bosch NEW Common Rail Injector for 2013-2018 Ram Cab & Chassis with a Cummins ISB 6.7L as well as fits certain QSB 6.7LCab & Chassis trucks only. Does NOT fit pickup trucks.  These are for 3500, 4500, & 5500 Cab & Chassis trucks. When your hard working Cummins ISB 6.7L or Q...

Swap out the faulty injector in your 2013-2018 Ram 6.7L Cummins with the XDP Remanufactured 6.7 Fuel Injector XD483. With over 30 million fuel injectors on the road, you can be certain you're getting a high-quality product.Each fuel injector is constructed with OE-style materials to provide you with...

G&R Diesel single filter head for the rear frame cab & chassis trucks. This product will ONLY work on Cab & Chassis Trucks G&R Diesel: GRD67CM3028-1, GRD67CM3028-2, GRD67CM3028-3, GRD67CM3028-4 ...

Fits: 2014-2018 Ram 2500/3500Switch out the old ball joints on your 2014-2018 Ram 2500/3500 with this Apex Chassis Extreme Duty Upper and Lower Ball Joint Kit. These ball studs are built from SAE 4140 Hot Forged Chromoloy. These are polished ball studs that have anti-friction bearings with precise t...

Fits: 2014-2019 Ram 2500/3500 CumminsSwitch out the damaged ball joints with the Apex Chassis Extreme Duty Upper and Lower Ball Joint Kit for your 2014-2019 Ram 2500/3500. These ball studs are built  from SAE 4140 Hot Forged Chromoly for optimal metallurgy. These Polished ball studs have anti f...

Fits: 2014-2022 Ram 2500 4WD Cummins 2013-2022 Ram 2500 4WD CumminsThis Apex Chassis Extreme Duty Tie Rod & Drag Link enhances steering in your 2014-2022 Ram 2500 4WD or 2013-2022 Ram 2500 4WD. This is a direct replacement extreme duty Tie Rod and Drag Link assembly replaces your underperforming...

Replace the cracked manifolds in your 2015-2019 Ford 6.7L Powerstroke F-250/350 or 2017-2019 Ford 6.7L Powerstroke F-350/450/550 Cab & Chassis with the BD-Power 1043008 Exhaust Manifold Kit. These Hi-Silicon ductile iron manifolds feature 0.275" walls that are 75% thicker than the stock manifolds to...

Fits: 2017-2022 Ford- 250/350 4WD (Except Wide Track)This Apex Chassis Extreme Duty Tie Rod & Drag Link is the steering upgrade your 2017-2022 Ford F-250/350 4WD (Except Wide Track) Needs. This is the perfect replacement extreme duty Tie Rod and Drag Link assembly to replace your damaged OE...

2017-2019 Ford 6.7 PowerStroke Cab Chassis Garrett Replacement TurbochargerFEATURES:100% New Drop In TurboPower: Stock 330HP @ 2800RPMTorque: Stock 725 ft-lb @ 1600RPM1 Year Unlimited Mile WarrantyTechnical Specifications: Compressor Wheel: 61mm x 90.5mm 11 BladeTurbine Wheel: 70.5mm x 62.5mm 1...

Fits: 1994-2002 Dodge 2500/3500 Cummins Updating your 1994-2002  Dodge Ram 2500/3500 with this Apex Chassis Adjustable Track Bar. This Track Bar is manufactured from an SAE 1045 Solid Steel Forged Housing, which is the best carbon alloy steel for this application. The CNC housing is built to...

Fits: 1999-2007 Ford F250/350, 2005-2020 Ford F-250/350, 2005-2017 Ford F-250/550 2WD/4WD 2000-2005 Ford Excursion 2WDThis Apex Chassis Drag Link Adjusting Sleeve (Right Side) is the perfect replacement for the stock adjusting sleeve in your 1999-2020 Ford Super Duty. This Apex tie rod adjustin...

Fits: 1994-1999 Dodge Ram 2500 4WD, 1994-1999 Dodge Ram 2500 2WD/4WD, 1980-1997 Ford F-250/350 4WD, 1999-2019 Ford F-250 4WD, 1999-2016 Ford F-350 4WD, 1999-2016 Ford F-450 2WD/4WD, 1999-2004 Ford F-550 2WD/4WD, 2000-2005 Ford Excursion 4WDSwitch out your damaged ball joints with this Apec Chassis E...

07.5-10 6.7L Cummins Cab & Chassis Northeast Diesel Stock Replacement Injector Every injector goes through 7 tests to insure perfect calibration. All injectors are tested on state of the art equipment with the most current calibrationCore Charge Applies. A UPS Pre-Paid return label is ...

The Industrial Injection Stock+ Reman 27LPM Injectors are a perfect replacement injector for someone looking for increased reliability. We balance the injectors to a tighter tolerance than the original manufacturer and have put a lot of time into making these the best injectors money can buy. All th...

Replace the faulty injectors in your 2007.5-2010 Ram 6.7L Cummins with the XDP Remanufactured 6.7 Fuel Injector XD496. With over 30 million injectors on the road, you can be confident that you are receiving a dependable component.XDP injectors are made from only the highest quality materials to prov...

The Industrial Injection 60hp / 10% Over Dragon Fly Injectors have been extrude honed and balanced to a perfect matching set injectors that flow 27LPM. The Dragon Fly 60HP / 10% Over injectors work great in a completely stock truck as well as one that has been modified with tuning and or turbo upgra...

Direct fit genuine Cummins exhaust manifold for 07.5-12 6.7L Cummins Cab And Chassis. Cummins: 5303009...

Fully divided pulse manifold made from high-silicon ductile iron and designed to withstand extreme temperatures and vibration. Precision slip joints allow the manifold to expand and contract, which reduces cyclic thermal fatigue and greatly increases manifold longevity.FEATURESPre-drilled for pyrome...

MOPAR OEM chassis mount fuel filter cap/cover with drain for Ram 6.7L Cummins '19-'21, 2500/3500/4500/5500 and '20-'21  1500 EcoDiesel trucks.     Part Number: 68436815AB Superseded part number: 68436815AA ...

Features: *Increased Fuel Economy *Lower EGTs *Mandrel Bent Tubing for Maximum Flow *Direct Fit *Increased Horsepower and Torque *Agressive Sound *Better Throttle Response *Easy Bolt-On Kits *Utilizes OEM Hangers *1-Year Limited Warranty on Aluminized kits *6-Year Limited Warranty on Stainless Stee...

2007.5-2012 Cab & Chassis 3500-5500 Aisin Transmissions Mopar part number: 68019688AA...

The Alliant AP0135 High-Pressure Fuel Pump Installation Kit is a direct-replacement for your 2017-2020 GM 6.6L Duramax L5P & 2019-2020 GM 6.6L Duramax L5D. This kit includes the necessary components to re-install the high-pressure common rail fuel pump on your truck.   FEATURES: Meets Or Exceeds...

The Alliant AP0136 Cylinder 3 Injector/EGR Gasket Kit is a must-have when replacing the cylinder 3 fuel injector in your 2017-2020 GM 6.6L Duramax L5P & 2019-2020 GM 6.6L Duramax L5D. The EGR pipe and EGR Valve must be removed to access the injector in cylinder 3. This kit contains the necessary gas...

Use the Alliant AP0133 Fuel Injector Return Line Seal Kit when resealing the injectors in your 2017-2020 GM 6.6L Duramax L5P and 2019-2020 GM 6.6L Duramax L5D. Each bank has a rigid Fuel Return Line that must be removed to access the fuel injectors. This seal kit provides a cost saving alternative t...

MOPAR OEM chassis mounted fuel filter for '19 - '22 Ram 2500/3500/4500/5500 Cummins Diesel trucks.  Also fits 2020-2022 Ram 1500 Eco Diesel trucks.   Part Number: 68436631AA ...

2011-2012 Cummins 6.7L Cab & Chassis 60HP Factory Reman Fuel InjectorOEM Cross Reference:499492868086182AANOTE: Please call with Engine Serial Number to verify application!Part number: 0986435574SEDFLY...

2011-2012 Dodge 6.7L Cab & Chassis Stock Reman InjectorOEM Cross Reference:499492868086182AANOTE: Please call with Engine Serial Number to verify application!Part number: 0986435574SE-IIS...

DIMENSIONS Width: 4 1/16" Length: 4" Inner Diameter: 5/8" Tapered Urethane   COMPETITORPART NUMBERAPPLICATION NOTES Automann M17450     M17450UB   International 3643103 Model 3900 School Bus Chassis   1664724C1 Model 3900 School Bus Ch...