filter

Oversized Tube and Fin Core:This BladeRunner Street Series Radiator features a 2-3/4" thick tube and fin core which provides greater heat dissipation and better coolant flow than the factory radiator for optimum cooling efficiency.End Tanks:The fabricated end tanks are constructed out of 1/8" alumin...

Fits: 2001-2016 Gm 6.6L Duramax LB7/LLY/LBZ/LMM/LMLThe AFE Bladerunner Exhaust Manifolds feature a bolt-on design and will increase power, performance, and exhaust flow in your 01-16 GM Duramax. Machined port: These manifolds have both the inlet and the outlet ports machined to matched the...

Fits: 2003-2007 Dodge 5.9L Cummins  The AFE Bladerunner 3" Intercooler Tube Upgrade for your 2003-2007 Dodge 5.9L Cummins increases flow and performance in your engine  Flow and performance:  The intercooler tubes are constructed of 3" mandrel bent stainless steel t...

Fits: 2003-2009 Dodge 5.9L/6.7L CumminsEasily swap out your truck's rubber radiator hoses for durable reinforced silicone hoses that outperform and outlast the factory hoses.Features:Stainless- Steel T-Bolt ClampsPremium 5-Ply Silicone, Ployester Reinforced HosesUpper and Lower Radiator Hoses Withst...

Durable Construction:aFe EGR coolers are constructed from new stainless steel components. All connections are welded, not brazed, to improve reliability.Direct-Flow Design:This cooler features 6 thick-wall heat exchanger tubes. These tubes are resistant to clogging, extending the life of the cooler....

Features: In recent testing the BladeRunner intake manifold outflowed the factory intake by 34% and resulting in gains of up to 11 HP and 27 lbs. x ft. of torque Constructed out of cast 808 aluminum alloy Unique MDV (Multiple Directional Vane) technology to guide the air through the manifold ma...

Features: Outflows the factory exhaust manifold by 49%, improving performance and throttle response Cast-in EGR flanges allows retention of factory EGR system The thick wall flange design increases strength, eliminating warping and cracking The machined ports and merged runner design reduces e...

The BladeRunner intake manifold represents the next generation in intake manifold design. The BladeRunner intake manifold uses a unique MDV (Multiple Directional Vane) technology to guide the air through the manifold maximizing air flow. Constructed out of cast 808 aluminum alloy, this manifold uses...

Fits: 2008-2010 Ford 6.4L Powerstroke The AFE Bladerunner Aluminum Hot & Cold Charge Pipe Kit are engineered to improve airflow for better cooling and more power in your 2008-2010 Ford 6.4L Powerstroke Flow & Preformance: This Bladerunner Charge Pipe Kit delivers smooth transi...

08-10 Ford 6.4L Powerstroke AFE Bladerunner Ported Ductile Iron Exhaust Manifolds AFE46-40124This is an incredibly durable part from AFE, the Bladerunner Ported Ductile Iron Exhaust Manifolds outflows the factory exhaust manifold by 5% and improves throttle response and performance. Both the inlet a...

This BladeRunner Intercooler represents the next generation of intercoolers. The BladeRunner intercoolers utilize a 2.5" bar and plate design that is larger than stock and outflows OE style tube and fin core designs by 36%!End Tanks: The unique BladeRunner end tanks are constructed out of 3/16'...

Fits: 2011-2016 Ford 6.7L Powerstroke The Bladerunner GT Series Intercooler features a direct bolt-on instillation that reuses factory mounting locations for an easy install and is 100% TIG welded for superior strength and durability. Designed to work with the factory charge pipes, the intercoo...

Reinforced Silicone:These hump coupling hose features 5-ply reinforced high temperature material which meet or exceed SAEJ20 Standard.Hump Coupling Hoses:Allow for expansion, movement, and extreme vibration between two hard pipes while reducing the possibility of connections coming apart or having y...

This BladeRunner GT Series Intercooler kit represents the next generation of intercoolers. The BladeRunner intercoolers utilize a 3" bar and plate core design that is larger than stock. This kit outflows the OE intercooler for more power.End Tanks:The unique BladeRunner end tanks are constructed out...

Flow and Performance: Constructed of 3" mandrel bent aluminum tubing for maximum flow then powder-coated wrinkle-black for heat and corrosion resistance. The smooth transition bends decrease turbulence and minimize pressure loss, increasing horsepower, torque and lowering EGT's. Installs on th...

Flow and Performance: Constructed of mandrel-bent, powder-coated aluminum tubing for maximum flow. The smooth transition bends decrease turbulence and minimize pressure loss, increasing horsepower, torque and lowering EGT's. Perfect Fit: Utilizes the factory mounting locations to provide stabil...

Flow and Performance: Constructed of 3" mandrel bent, powder-coated aluminum tubing for maximum flow. The smooth transition bends decrease turbulence and minimize pressure loss, increasing horsepower, torque and lowering EGT's. Installs on the Hot Side to transfer heated air smoothly to the in...

This BladeRunner Intercooler represents the next generation of intercoolers. Designed specifically for the 2016-2019 Nissan Titan XD V8-5.0L turbo diesel Cummins, this BladeRunner intercooler utilizes a 3" bar and plate core design. This design outflows the factory tube and fin core design, while th...

**Fitment note** Fits AFE 46-20284-B Intercooler Pipes OnlyReinforced Silicone:These coupling hose features 5-PLY reinforced high temperature material which meet or exceed SAEJ20 Standard.Coupling Hoses:Allow for expansion, movement, and extreme vibration between two hard pipes while reducing the po...

**Fitment Note** Fits AFE Intercooler Kit OnlyReinforced Silicone:These coupling hose features 5-PLY reinforced high temperature material which meet or exceed SAEJ20 Standard.Coupling Hoses:Allow for expansion, movement, and extreme vibration between two hard pipes while reducing the possibility of ...

Backordered with No ETA   **Updated on 09/11/2024** Perfect Fit: Utilizes the factory mounting locations for a hassle-free installation. Includes high quality stainless steel clamps and heavy-duty 5-Ply polyester reinforced couplings for strength and durability. This intercooler tube k...

This BladeRunner GT Series Intercooler represents the next generation of intercoolers, utilizing a 2-5/8in bar and plate core design, making it larger than stock.End Tanks:The unique BladeRunner end tanks are constructed out of 3/16in TIG-Welded aluminum plates.2-5/8in Bar and Plate Core Design:The ...

18-20 Ford F-150 3.0L Powerstroke AFE Bladerunner GT Series Intercooler Kit AFE46-20362-BEnd Tanks:BladeRunner GT Series intercooler end tanks are constructed out of heavy-duty 3/16in TIG-welded aluminum plates.3-1/2in Bar and Plate Core:This BladeRunner intercooler kit uses a bar and plate core tha...

Fits:  2019-2023 Ram 6.7L CumminsOrder this AFE 46-20619-B BladeRunner Cold Side Intercooler Pipe for your 2019-2023 Ram 6.7L Cummins today. Switch out your RAM's restrictive plastic charge pipe with this AFE Power's BladeRunner free-flowing, heat-resistant aluminum charge pipe. Easy transition...

Fits: 2019-2023 Ram 6.7L CumminsPick out this AFE 46-20614-B BladeRunner Hot & Cold Side Intercooler Pipe Kit for your 2019-2023 Ram 6.7L Cummins today. Switch out your RAM's restrictive plastic charge pipe with this AFE, Power's BladeRunner free-flowing, heat-resistant aluminum charge pipe.&nbs...

Fits: 2019-2023 Ram 6.7L CumminsPurchase this AFE 46-20618-B BladeRunner Hot Side Intercooler Pipe for your 2019-2023 Ram 6.7L Cummins. Directly switch out your RAM's restrictive plastic charge pipe with AFE Power's BladeRunner free-flowing, heat-resistant aluminum charge pipe. Easy transitions in t...

Please note! This manifold is a center dump manifold and is designed to replace the factory exhaust manifold on 1998.5-2002 5.9L Cummins trucks. It can be used on trucks as new as 2018, however, since 2003-2018 trucks have an offset turbo flange and in 6.7L applications has a different turbo flange ...

Flow and Performance:This intercooler tube is constructed of 3" mandrel bent aluminum tubing for maximum flow then powder-coated wrinkle-black for heat and corrosion resistance. The smooth bends allow for low turbulence while increasing horsepower and torque with lower EGT's.Installation is a snap:U...

Flow and Performance:This intercooler tube is constructed of 3" mandrel bent aluminum tubing for maximum flow then powder-coated wrinkle-black for heat and corrosion resistance. The smooth bends allow for low turbulence while increasing horsepower and torque with lower EGT's.Installation is a snap:U...

Backordered with No ETA   **Updated on 07/24/2024** Universal - 10" X 8" X 2" (-8 AN Fittings, 1/2" Hose) Bladerunner Universal Oil Cooler Kit AFE46-80004 The Universal Oil Cooler Kit is for use with power steering fluid, transmission oil, engine oil and includ...

Universal - 10" X 4.75" X 2" (-8 AN Fittings, 1/2" Hose) AFE Bladerunner Universal Oil Cooler Kit Universal Fitment 46-80003 Stacked-plate cooler design for optimal heat transfer efficiency Utilizes black-anodized AN -8 fittings for a leak-proof connection Uni...

The AFE 46-60100 BladeRunner Street Series Turbocharger for your 2001-2004 GM 6.6L Duramax LB7 is the perfect solution to replacing your factory turbocharger. Designed to be a bolt-in replacement, the AFE BladeRunner has been dyno tested to increase horsepower, without the need for additional fuelin...

The aFe BladeRunner exhaust manifold for the popular 03-07 Dodge Ram Cummins with the L6-5.9L (td) engine sets a new standard in manifold design. In recent testing, this exhaust manifold outflowed the factory exhaust manifold by up to 23%, improving performance and throttle response. The thick wall ...

Features: Outflows the factory exhaust manifold by 50%, improving performance and throttle response Ported flanges ensure excellent seal and clean stylish look. The thick wall flange design increases strength, eliminating warping and cracking. The machined ports and merged runner design reduce...

Features: +11 HP  / +21 lbs. x ft. Torque max gains Outflows the factory turbo inlet manifold by up to 7%, improving performance and throttle response Powder-coated wrinkle-black for heat resistance Multi-directional vane (MDV) technology to maximize airflow to your turbocharger Compatible w...

Please note! This manifold is a center dump manifold and is designed to replace the factory exhaust manifold on 1998.5-2002 5.9L Cummins trucks. It can be used on trucks as new as 2018, however, since 2003-2018 trucks have an offset turbo flange and in 6.7L applications has a different turbo flange ...

The aFe Bladerunner Turbo Inlet Manifold increases performance to your Duramax by 23hp and 57lbs  x ft. torque while increasing air flow 73% over the factory turbo inlet. The Bladerunner turbo inlet manifold also improves turbo spool up times and lowers exhaust gas temperature (EG...

Features: Constructed of hard coated black stamped steel Direct Bolt-On application fits factory mounting locations, requires no modification of turbocharger Preset to 40 PSI, capable range from 20-60 PSI Heavier spring & larger diaphragm Custom aFe Power logo for an aggressive style Ful...

Features: 5-Ply polyester reinforced high temp silicone coupling set Coupler hoses allow for expansion, movement and vibration between two hard pipes aFe replacement coupling kit Reinforced Silicone:These couplings features high temperature 5-Ply reinforced silicone material which meet or ex...

Outflows the stock intercooler with tubes and increases heat dissipation End tanks constructed out of 3/16 Aluminum plate Incorporates Multi-directional vane (MDV) technology to direct hot airflow through the intercooler core 6" Bar and plate core design that is 20% larger than stock This inte...

Bolts right on, includes couplings and clamps, and will out perform any factory set up! Features: • Outflows stock intercooler tubes by up to 5% • Replacement tubes for both hot and cold side of the intercooler • Constructed out of 3" mandrel-bent aluminum tubing • ...

The new Bladerunner manifold kit for the popular 7.3L Power Stroke is constructed of cast A356-T6 aluminum and features the patented MDV (Multiple Directional Vane) technology which helps increase intake velocity for increased flow, lower EGT's, improved MPG and faster turbo spool up times.&nbs...

Features: Outflows the stock intercooler with tubes and increases heat dissipation Constructed out of cast 356-T6 aluminum end tanks Incorporates Multi-directional vane (MDV) technology to direct hot airflow through the intercooler core 2-1/2" Bar and plate core design that is 25% larger than ...

aFe introduces you to the BladeRunner intercooler outlet tube for your 2008-2010 Ford diesel Powerstroke with the V8-6.4L (td) engine. This passenger-side tube upgrade represents the next generation of diesel performance products by removing restriction that hinders flow. In recent testing this tube...

aFe Power is proud to introduce the square body direct replacement Oil Cooler for 2003-2007 V8-6.0L (td) Ford Powerstroke trucks.  This unit includes all necessary hardware needed for the removal and replacement of the oil cooler. This Oil Cooler is a 100% new unit, not remanufactured.New Construct...

This BladeRunner Intercooler represents the next generation of intercoolers. The BladeRunner intercoolers utilize a 3" bar and plate core design that is larger than stock and outflows OE style tube and fin core designs by 32%! End Tanks: The unique BladeRunner end tanks are constructed out of 3/16...

Bladerunner Intercoolers represent the next generation of intercoolers.  The Bladerunner intercoolers utilize a 3" bar and plate design that outperforms OE style tube and fin core designs.  The  end tanks are constructed out of 3/16' TIG welded aluminum plate tanks that incorporate three ...

This brand new Bladerunner Intercooler represents the next generation of intercoolers.  The Bladerunner intercoolers utilize a 3.15"  bar and plate design that is 15% larger than the competitors and outflows OE style tube and fin core designs by 74%! This design results in quic...